• 제목/요약/키워드: School architecture

검색결과 6,991건 처리시간 0.031초

ECDSA 하드웨어 가속기가 내장된 보안 SoC (A Security SoC embedded with ECDSA Hardware Accelerator)

  • 정영수;김민주;신경욱
    • 한국정보통신학회논문지
    • /
    • 제26권7호
    • /
    • pp.1071-1077
    • /
    • 2022
  • 타원곡선 암호 (elliptic curve cryptography; ECC) 기반의 공개키 기반구조 구현에 사용될 수 있는 보안 SoC(system-on-chip)를 설계하였다. 보안 SoC는 타원곡선 디지털 서명 알고리듬 (elliptic curve digital signature algorithm; ECDSA)용 하드웨어 가속기가 AXI4-Lite 버스를 통해 Cortex-A53 CPU와 인터페이스된 구조를 갖는다. ECDSA 하드웨어 가속기는 고성능 ECC 프로세서, SHA3 (secure hash algorithm 3) 해시 코어, 난수 생성기, 모듈러 곱셈기, BRAM (block random access memory), 그리고 제어 FSM (finite state machine)으로 구성되며, 최소의 CPU 제어로 ECDSA 서명 생성과 서명 검증을 고성능으로 연산할 수 있도록 설계되었다. 보안 SoC를 Zynq UltraScale+ MPSoC 디바이스에 구현하여 하드웨어-소프트웨어 통합 검증을 하였으며, 150 MHz 클록 주파수로 동작하여 초당 약 1,000번의 ECDSA 서명 생성 또는 서명 검증 연산 성능을 갖는 것으로 평가되었다. ECDSA 하드웨어 가속기는 74,630개의 LUT (look-up table)와 23,356개의 플립플롭, 32kb BRAM 그리고 36개의 DSP (digital signal processing) 블록의 하드웨어 자원이 사용되었다.

레디믹스트 콘크리트의 환경성적표지 현황 및 특성 분석 (Analysis of the Present Status and Characteristics of Environmental Product Declaration of Ready-mixed Concrete)

  • 김낙현;김광현;박원준;노승준
    • 한국건축시공학회지
    • /
    • 제22권2호
    • /
    • pp.137-148
    • /
    • 2022
  • 본 연구는 레디믹스트 콘크리트의 환경성적표지 현황 조사와 이를 통한 레디믹스트 콘크리트 규격, 생애주기, 권역별 탄소배출량 특성 분석을 목적으로 한다. 이를 위해 콘크리트 산업의 탄소배출량 산정이 요구되고 있는 관련 인증제도를 분석하고, 레디믹스트 콘크리트 제품의 탄소배출량 현황분석을 위해 전과정평가 기법에 기반한 EPD 인증을 받은 제품군을 대상으로 하여 레디믹스트 콘크리트의 활성화 정도를 분석하였다. 또한 레디믹스트 콘크리트 제품의 생애주기별 탄소배출량 분석, 규격별 탄소배출량 분석, 권역별 탄소배출량 분석을 수행하여 각 특성에 따른 탄소배출량 추이를 검토하였다. 분석결과 생애주기별 탄소배출량은 제조전단계가 99% 수준을 나타냈으며, 18MPa에서 40MPa로 증가할수록 탄소배출량도 증가하는 추세를 보였다. 단, 동일 규격이라고 하더라도 수도권의 탄소배출량이 남부지역 대비 높은 탄소배출량을 나타냈다.

실내 미세먼지 저감을 위한 플랜테리어 디자인 연구 (A Study on the Design of Planterior to Reduce and Purify Indoor Particle Matters (PM))

  • 안승원;정준현
    • 한국화예디자인학연구
    • /
    • 제44호
    • /
    • pp.3-31
    • /
    • 2021
  • 본 연구는 실생활 환경인 주거공간에서 식물의 공기 정화능력 이 어떤 효과를 보이는가를 검증하기 위하여 전용면적 129.78m2의 아파트 3개호를 대상으로, 거실 공간(115.6m3)에 한정하여 식물 유·무에 따라 공기질 상태를 조사하였으며 연구결과는 다음과 같다. 1) 사례A는 통계적으로 유의미하게 차이를 보이고 있지 않으나, 사례B, C는 PM10, PM2.5, PM1.0의 영역에서 각각 통계적으로 유의미한(p<.01) 차이가 있음을 검증하였다. 2) 실내공간의 식물설치에 따른 미세먼지 저감효과는 실내 환경 조건과 실내의 청결도와 집기의 양에 따라서도 유의한 차이가 있을 것으로 판단되며, 이에 대한 보충적인 연구가 필요하다고 사료된다. 3) 실내 미세먼지 저감을 위한 플랜테리어 디자인으로 다양한 방안을 검토하였으며, 그중 실증적 실험을 통하여 수직벽면 디자인 방법을 실험하여 제언하였다. 또한 실내식물의 유형에 따라 유지관리 방법을 제언하였다.

합성곱 네트워크 기반의 Conv1D 알고리즘에서 시간 종속성을 반영한 선박 연료계통 장비의 고장 진단 모델 (The Fault Diagnosis Model of Ship Fuel System Equipment Reflecting Time Dependency in Conv1D Algorithm Based on the Convolution Network)

  • 김형진;김광식;황세윤;이장현
    • 한국항해항만학회지
    • /
    • 제46권4호
    • /
    • pp.367-374
    • /
    • 2022
  • 본 연구는 자율운항 선박의 연료 계통 펌프와 청정기를 대상으로 고장을 진단 사례를 제시하였다. 계측된 신호의 시간종속성을 반영한 심층학습(Deep learning) 알고리즘 적용 절차를 구성하고, 장비의 정상 운전상태와 고장 상태에서 계측한 진동 신호를 고장 패턴 학습에 사용하였다. 특히, 진동 신호에 내포된 열화의 시간 종속성을 반영할 수 있는 방법을 찾고자 하였으며, 슬라이딩 윈도우 연산 과정을 가진 Conv1D를 이용하여고장의 시간 종속성을 반영하였다. 또한 계측된 신호의 차수를 2차원에서 3차원으로 확장하여 시간 영역의 특징을 반영할 수 있는 데이터 전처리과정을 고안하였다. Conv1D 알고리즘의 적층과 변수를 결정하는 과정에서 그리드 탐색 기법을 사용하여 초매개변수의 최적 값을 결정하였다. 마지막으로 제안한 데이터 전처리 방법과 시계열 데이터의 시간 종속성을 반영한 Conv1D 모델이 이상 감지 및 고장 진단에 타당성이 있음을 확인하였다.

지하철 승강장의 음원-수음점 거리에 따른 실내음향 평가지수 특성 (Characteristic of room acoustical parameters with source-receiver distance on platform in subway stations)

  • 김수홍;송은성;김정훈;이송미;류종관
    • 한국음향학회지
    • /
    • 제40권6호
    • /
    • pp.615-625
    • /
    • 2021
  • 본 연구에서는 지하철 승강장에 적합한 실내음향 설계기준 제시에 앞서, 현재의 지하철 승강장의 위치별 실내음향 특성을 파악하기 위해 2개의 지하철 역사 승강장에서 현장 측정을 실시하였다. 승강장의 길이방향에 따른 분석 결과, 음원에서 수음점이 멀어질수록 음압레벨은 감소(최대 차이: 약 14 dB), 잔향시간은 증가하는 경향(최대차이: 0.8 s ~ 1.5 s)이었고, C50과 D50은 감소하는 경향(최대 차이: 5.9 dB ~ 9.1 dB와 31.8 % ~ 37.6 %)인 것으로 나타났다. 공간감의 지표인 Interaural Cross-correlation Coefficient(IACC)는 음원과의 거리에 따른 명확한 경향성은 보이지 않았지만, 전체적으로 0.3이하의 낮은 값을 보였다. 이러한 결과를 살펴보았을 때 지하철 승강장은 일반적으로 강한 반사재로 마감 되었음에도 수음위치에 따라 직접음과 반사음의 다양한 조합이 형성되어 비균일한 음장특성을 갖는 것으로 판단된다. 이는 길이 대비 높이가 낮고 긴 평면형태를 갖는 지하철 승강장에서는 음원과 수음점의 거리에 따라 근접음장과 원음장의 실내음향특성이 뚜렷이 발현되고 있음을 나타난다. 따라서, 승강장의 모든 위치에서 명료한 음정보를 갖춘 실내음향설계를 위해서 승강장에서의 스피커와 수음점 위치별 특성에 기인한 세부 건축 및 전기음향설계가 필요하다.

Spatial modeling of mortality from acute lower respiratory infections in children under 5 years of age in 2000-2017: a global study

  • Almasi, Ali;Reshadat, Sohyla;Zangeneh, Alireza;Khezeli, Mehdi;Teimouri, Raziyeh;Naderi, Samira Rahimi;Saeidi, Shahram
    • Clinical and Experimental Pediatrics
    • /
    • 제64권12호
    • /
    • pp.632-641
    • /
    • 2021
  • Background: Over the past few decades, various goals have been defined to reduce the mortality of children caused by acute lower respiratory infections (ALRIs) worldwide. However, few spatial studies to date have reported on ALRI deaths. Purpose: We aimed to assess the spatial modeling of mortality from ALRI in children under 5 years of age during 2000-2017 using a global data. Methods: The data on the mortality of children under 5 years old caused by ALRI were initially obtained from the official website of the World Health Organization. The income status of their home countries was also gathered from the Country Income Groups (World Bank Classification) website and divided into 5 categories. After that, in the ArcGIS 10.6 environment, a database was created and the statistical tests and related maps were extracted. The Global Moran's I statistic, Getis-Ord Gi statistic, and geographically weighted regression were used for the analyses. In this study, higher z scores indicated the hot spots, while lower z scores indicated the cold spots. Results: In 2000-2017, child mortality showed a downward trend from 17.6 per 100,000 children to 8.1 and had a clustered pattern. Hot spots were concentrated in Asia in 2000 but shifted toward African countries by 2017. A cold spot that formed in Europe in 2007 showed an ascending trend by 2017. Based on the results of geographically weighted regression test, the regions identified as the hot spots of mortality from ALRI in children under 5 years old were among the middle-income countries (R2=0.01, adjusted R2=8.77). Conclusion: While the total number of child deaths in 2000-2017 has decreased, the number of hot spots has increased among countries. This study also concluded that, during the study period, Central and Western Africa countries became the main new hot spots of deaths from ALRI.

가상현실 기반 건설안전교육이 건설근로자의 학습효과에 미치는 영향 - CAMIL 이론을 활용하여 - (Effect of virtual reality-based construction safety education on the learning performance of construction workers - Using CAMIL theory -)

  • 박현수;구충완
    • 한국건설관리학회논문집
    • /
    • 제23권3호
    • /
    • pp.104-115
    • /
    • 2022
  • 건설 산업에서 발생하는 안전사고는 전체 산업 중 가장 높은 비율을 차지하고 있으며, 이를 해결하기 위한 방안으로서, 건설업 기초안전·보건교육 제도에 가상현실(Virtual Reality; VR) 기반 체험형 교육방식의 도입을 장려하고 있다. 하지만, VR 기반 건설안전교육을 수행하기 위한 컨텐츠 및 기자재 인프라 미흡, 전문인력 부족 등의 한계로 인해, 사진기반 VR 컨텐츠를 시청하는 방법(간접교육방식)이 주를 이루고 있다. 본 연구에서는, CG기반 VR 컨텐츠를 체험하는 방법(직접교육방식, 유형 B)과 기존의 VR 시청교육(간접교육방식, 유형 A) 간의 학습효과 차이를 분석하였으며, CAMIL (Cognitive & Affective Model of Immersive Learning) 기반의 객관적인 평가도구를 활용하였다. 본 연구에서 수행한 t-test(평균차이 분석) 결과에 따르면, CAMIL 이론에 따른 4단계의 모든 영역에 있어서, VR 시청교육(간접교육방식) 대비하여 VR 체험교육(직접교육방식)의 학습효과가 우수한 것으로 나타났다. 본 연구를 통해서, VR 기반 건설안전교육의 올바른 방법(시청교육이 아닌 체험교육)을 제시할 수 있었으며, VR 체험교육의 확대를 통해 건설근로자의 안전교육 학습효과를 개선할 수 있을 것으로 기대된다.

원격탐사기반 임분고 추정 모델 개발 국내외 현황 고찰 및 제언 (Review of Remote Sensing Technology for Forest Canopy Height Estimation and Suggestions for the Advancement of Korea's Nationwide Canopy Height Map)

  • 이복남;정건휘;류지연;권경원;임종수;박주원
    • 한국산림과학회지
    • /
    • 제111권3호
    • /
    • pp.435-449
    • /
    • 2022
  • 대면적 산림의 정확한 임분고 측정은 산림경영, 산림 탄소량 추정, 산림 생태계 관리를 위한 필수적인 지표인자로 다수의 국가에서 주기적인 현장조사를 수행하고 있다. 하지만, 현장조사는 많은 비용 및 시간 소요, 접근의 용이성이 낮은 지역의 조사의 기술적 한계성을 가지고 있다. 이를 극복하기 위한 대안으로 원격탐사 기술을 이용한 수고 및 임분고 추정 연구가 활발하다. 이에 본 논문에서는 해외 및 국내의 다양한 원격탐사기반 수고 및 임분고 추정 연구 사례를 분석하여 원격탐사기반 임분고 추정 연구의 동향을 크게 LiDAR기반, Stereo 및 SAR 이미지 점군(Image-based Point Clouds)기반, 원격탐사자료 융합기반 임분고 추정 모델로 나누어 살펴보았다. 또한, 대면적의 전국단위 산림 임분고 추정을 위한 원격탐사자료의 업스케일링(Upscaling) 기법의 사례 분석을 통해 향후 국내 산림환경 및 현황에 적합한 원격탐사기반 전국단위 산림 임분고 추정을 위한 방법의 발전 방향성을 고찰하였다.

AI 기반 설계 탐색 기법을 통한 선박의 주요 치수 최적화 (A Study on the Optimization of Main Dimensions of a Ship by Design Search Techniques based on the AI)

  • 박동우;김인섭
    • 해양환경안전학회지
    • /
    • 제28권7호
    • /
    • pp.1231-1237
    • /
    • 2022
  • 본 논문에서는 AI 기반 설계 탐색 기법을 활용하여 선박의 주요 치수 최적화를 수행하였다. 설계 탐색 기법은 최적화 프로그램 HEEDS의 SHERPA 알고리즘을 사용하였다. 유동 해석은 상용 CFD 코드인 STAR-CCM+를 사용하였고, 주요 치수 변환은 전처리 과정에서 JAVA Script와 Python을 사용하여 선박의 치수가 자동으로 변환되도록 설정하였다. 대상 선박은 소형 쌍동선형으로 주요 치수 최적화는 한쪽 선형의 길이, 폭, 흘수 그리고 단동선형 간의 간격에 대하여 수행되었다. 최적화 알고리즘에 사용된 목적함수는 총저항이며, 내부 의장 시스템의 크기 등을 고려한 배수 체적의 범위를 제한조건으로 선정하였다. 그 결과 최적 선형의 주요 치수는 기존 선형 대비 ±5% 내에서 변화가 있었고 총저항은 약 11% 개선된 결과를 보였다. 본 연구를 통해 선박의 형상을 직접 변경하지 않더라도 주요 치수 최적화를 통해 선박의 저항 성능이 향상됨을 확인하였고, 다양한 선박의 주요 치수 최적화를 통한 성능 향상에 활용이 될 것으로 기대한다.

생태적 설계지표와 입지특성에 따른 도시공원 생태성 평가 (Assessing the ecological aspects of urban parks based on ecological design indicators and location characteristics)

  • 손희정;김나영;송영근
    • 한국환경복원기술학회지
    • /
    • 제26권4호
    • /
    • pp.35-50
    • /
    • 2023
  • As urbanization progresses, there is a growing and continuous demand for green spaces that provide ecosystem services. However, increasing the quantity of green spaces within major cities is challenging. Therefore, it is essential to pursue qualitative improvements that consider ecological characteristics of existing green spaces. In this study, we focus on local neighborhood parks in Seoul and present the following two questions through an evaluation utilizing ecological design indicators and land use data: 1. Which factor, design or location, has a greater influence on the ecological quality of neighborhood parks in Seoul? 2. Additionally, when evaluating ecological characteristics, is there similarity between assessments based on land-use data and those utilizing ecological design indicators? For this study, we conducted research on 30 neighborhood parks in Seoul and classified them into mountainous types (adjacent to mountains, natural terrain parks) and urban types (independently designed within 300m without existing forests) based on previous studies. Firstly, we conducted evaluations according to park location types. When comparing the evaluation scores of urban types (14 parks) and mountainous types (16 parks), significant differences were observed with scores of 16.86 and 35.94, respectively. Statistical analysis showed a significant difference between park types. In terms of habitat quality, the average values for urban and mountainous parks were 0.33 and 0.53, respectively, and statistically significant differences were observed between park types indicating differences in ecological potential according to park location. Secondly, when comparing the results of ecological potential evaluations based on park design and external connectivity, a correlation was found between habitat quality and total scores according to evaluation indicators. The correlation analysis showed significant linear relationships between habitat quality and total scores, biodiversity scores, and ecosystem function scores, with high positive correlation coefficients of 0.829, 0.861, and 0.802, respectively. This study holds significance in analyzing the ecological aspects of urban parks through the lens of both park location characteristics and design indicators. The analysis results underscore the importance of planning and managing ecologically sound urban parks contingent upon their location. Moreover, the utilization of appropriate ecological design indicators can help alleviate environmental limitations surrounding parks. Integrating these considerations could enhance the ecological quality and ecosystem services of urban green spaces.