DOI QR코드

DOI QR Code

Analysis of the Present Status and Characteristics of Environmental Product Declaration of Ready-mixed Concrete

레디믹스트 콘크리트의 환경성적표지 현황 및 특성 분석

  • Kim, Rak-Hyun (Greeners Corporation) ;
  • Kim, Gwang-Hyun (Department of Construction Life Cycle Assessment, Greeners Corporation) ;
  • Park, Won-Jun (Department of Architectural Engineering, Kangwon National University) ;
  • Roh, Seung-Jun (School of Architecture, Kumoh National Institute of Technology)
  • Received : 2022.03.03
  • Accepted : 2022.03.30
  • Published : 2022.04.20

Abstract

Recently, in the concrete industry, the development and commercialization of low-carbon products of ready-mixed concrete have emerged as part of the efforts to realize carbon neutrality. This study aims to investigate the current status of environmental product declaration(EPD) of ready-mixed concrete and to analyze the characteristics of carbon emissions by compressive strength, life cycle stage, and region. To this end, the related certification system requiring the calculation of carbon emissions in the concrete industry was analyzed. The target of analyzing the current status of carbon emissions was set as a product of ready-mixed concrete that acquired EPD certification based on the life cycle assessment method. In addition, the trend of carbon emissions according to each characteristic was reviewed by analyzing carbon emissions by the life cycle of ready-mixed concrete products, analyzing carbon emissions by standard, and analyzing carbon emissions by region. As a result, the carbon emissions in the pre-production stage were 99% compared to total carbon emissions., and as it increased from 18MPa to 40MPa, carbon emissions also increased. Even with the same specifications, the carbon emissions in the capital region were higher than in the southern region.

본 연구는 레디믹스트 콘크리트의 환경성적표지 현황 조사와 이를 통한 레디믹스트 콘크리트 규격, 생애주기, 권역별 탄소배출량 특성 분석을 목적으로 한다. 이를 위해 콘크리트 산업의 탄소배출량 산정이 요구되고 있는 관련 인증제도를 분석하고, 레디믹스트 콘크리트 제품의 탄소배출량 현황분석을 위해 전과정평가 기법에 기반한 EPD 인증을 받은 제품군을 대상으로 하여 레디믹스트 콘크리트의 활성화 정도를 분석하였다. 또한 레디믹스트 콘크리트 제품의 생애주기별 탄소배출량 분석, 규격별 탄소배출량 분석, 권역별 탄소배출량 분석을 수행하여 각 특성에 따른 탄소배출량 추이를 검토하였다. 분석결과 생애주기별 탄소배출량은 제조전단계가 99% 수준을 나타냈으며, 18MPa에서 40MPa로 증가할수록 탄소배출량도 증가하는 추세를 보였다. 단, 동일 규격이라고 하더라도 수도권의 탄소배출량이 남부지역 대비 높은 탄소배출량을 나타냈다.

Keywords

Acknowledgement

This research was supported by Kumoh National Institute of Technology(No. 2019104030).

References

  1. Favier A, Wolf C, Scrivener K, Habert G. A sustainable future for the european cement and concrete industry-technology assessment for full decarbonisation of the industry by 2050. Zurich (Swiss): Swiss Federal Institute of Technology (ETHZ); 2018. 96 p.
  2. ISO 13315-6. Environmental management for concrete and concrete structures. International Organization for Standardization; 2019.
  3. EN 16757. Sustainability of construction works - Environmental product declarations - product category rules for concrete and concrete elements. Europaische Norm; 2017.
  4. Scrivener KN, John VM, Gartner EM, Eco-efficient cements: Potential economically viable solutions for a low-CO2 cement-based materials industry. Cement and Concrete Research. 2018 Dec;114:2-26. https://doi.org/10.1016/j.cemconres.2018.03.015
  5. Giesekam J, Barrett J, Taylor P. Construction sector views on low carbon building materials. Building Research & Information. 2015 Oct;44(4):423-44. https://doi.org/10.1080/09613218.2016.1086872
  6. Kim RH, Lim MK, Roh SJ, Park WJ. Analysis of the characteristics of environmental impacts according to the cut-off criteria applicable to the streamlined life cycle assessment of apartment buildings in South Korea. Sustainability. 2021 Mar;13(5):2898. https://doi.org/10.3390/su13052898
  7. Roh SJ, Kim RH, Park WJ, Ban HK. Environmental evaluation of concrete containing recycled and by-product aggregates based on life cycle assessment. Applied Sciences. 2020 Oct;10(21):7503. https://doi.org/10.3390/app10217503
  8. Kim RH. The current status of green building materials based on changing of materials and resources in G-SEED. Magazine of Recycled Construction Resource. 2020 Dec;15(4):48-57. https://doi.org/10.14190/MRCR.2020.15.4.048
  9. Green Building Center. G-SEED: Green standard for energy & environmental design annual report-2020. Goyang (Korea): Korea Institute of Civil Engineering and Building Technology; 2020 Dec. 42 p. Report No.: KICT 2020-255
  10. Green Building Center. G-SEED: Green standard for energy & environmental design certification criteria commentary report . Goyang (Korea): Korea Institute of Civil Engineering and Building Technology; 2021 Oct. 455 p. Report No.: 2016-6 v1
  11. Korea Environmental Industry & Technology Institute. Carbon emission assessment manual - construction materials. Seoul (Korea): Korea Environmental Industry & Technology Institute. 2016. 73 p.
  12. Korea Environmental Industry & Technology Institute. The Current status and development direction of environmental product declaration. Seoul (Korea): Korea Environmental Industry & Technology Institute. 2020.
  13. Korea Environmental Industry & Technology Institute, Environmental product declaration product category rules - general principles. Seoul (Korea): Korea Environmental Industry & Technology Institute. 2021. 17 p.
  14. Korea Environmental Industry & Technology Institute, Environmental product declaration product category rules - ready-mixed concrete. Seoul (Korea): Korea Environmental Industry & Technology Institute. 2021. 4 p.
  15. Purnell, P. The carbon footprint of reinforced concrete. Advances in cement research. 2013 Dec;25(6):362-8. https://doi.org/10.1680/adcr.13.00013
  16. Anderson J, Moncaster A. Embodied carbon of concrete in buildings, Part 1: Analysis of published EPD. Buildings and Cities. 2020;1(1)198-217. http://doi.org/10.5334/bc.59
  17. Wang XY, Wang YS, Lin RS, Cho HK, Min TB. Energy Optimization Design of Limestone Hybrid Concrete in Consideration of Stress Levels and Carbonation Resistance. Buildings. 2022 Mar;12(3):342. https://doi.org/10.3390/buildings12030342
  18. ISO 14025. Environmental Labels and Declaration - Type III environmental declarations - Principles and procedures. International Organization for Standardization; 2006.