• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.10 no.2
• /
• pp.1-15
• /
• 2007

A variety of revegetation methods are being utilized and developed. However, most of revegetation methods used on highway slopes in Korea are based on foreign-introduced plant varieties to stabilize road surfaces and to administer afforestation for surface covering at an earlier phase. Therefore. it results in various problems. such as failure to achieve harmony with the surrounding vegetation and 10 cause re-denudation of slopes as the foreign-in introduced plant varieties wane out from 2~3 years after hydro-seeding, etc. In addition, some of the revegetation plants seeded in the earlier phase grow excessively high, thus causes successional problems, such as to inhibit the invasion of the secondary vegetation from the surrounding areas, etc. Therefore, in this study, 160 slopes located in the nationwide express highways have been investigated and analyzed in order to produce basic data for restoration of ecological environment in slopes created on a long-term basis by investigating and analyzing locational characteristics of cut and filled slopes in express highways, status of revegetation methods, characteristics of soil and plant-ecological environment. 1. Investigation on cut and embanked slopes in express highways was carried out in the total of 160 locations, which include 108 cut slopes and 52 embanked slopes. As a whole, the most frequently used revegetation method was seed spray, which was found to be used in the total of 55 target slops investigated. 2. Planting method of Wistaria floribunda applied to some of the blasted rock zones was found to cause damages as Wistaria floribunda trailed up the surrounding vegetation and the secondary invaded trees. In order to prevent this, this method must be used only in the lowest parts of large-sized slopes. Also, it will be required to administer continuous management and maintenance in the areas already planted with this plants. 3. The areas of blasted rock and ripping rock slopes were applied with coir net (net + seeding) method. However, many of these areas failed in achieving ground covering. Most areas where revegetation was in progress, they were covered with Eragrostis curvula(Weeping lovegrass) only. In areas with soil, such as decomposition of granite, where afforestation is difficult. In this slopes, soil base must be improved by hrdroseeding with thin-layer vegetation base application methods in order to achieve success in afforestation with native plants. 4. Woody species, rather than herb species, are more helpful in stabilization of slope surfaces. Therefore, it is important to be able to grow and protect woody species on highway slopes. Growth of woody vegetation is most largely influenced by soil depth. Thus, when hydro-seeding woody plants, it is recommended to apply at the upper layer of the slopes, which is capable to sufficiently provide the fundamentals required in plant growth.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.11 no.3
• /
• pp.107-115
• /
• 2008

Herbs and plants widely used for the ecological restoration were selected for germination rate analysis under treatment of microorganisms to determine ideal treatment conditions and medium for enhanced germination rate. Albizzia julibrissin, when submerged in a nutrient medium or distilled water, presented a decrease in germination period rather than increase in germination rate. When treated with microorganism culture solution (JM-2) for 24 hours, 90% germination was achieved in two days, which is sufficient evidence to conclude that such treatment accelerates the germination of Albizzia julibrissin. Germination period decreased for Lespedeza cyrtobotrya samples submerged in microorganism solution for 15 and 48 hours, however, increases in germination rates were not observed. Sample treated in the solution for 24 hours had increased germination rate and enhanced germination period. Microorganism solution treatment had a negative effect on germination for Lespedeza cuneata, unlike Lespedeza cyrtobotrya and Albizzia julibrissin. Microorganism treated seeds of Lepsedeza cuneata had a lower germination rate than that of the control with no treatment. However, submerging treatments in a nutrient medium or distilled water for 24 to 48 hours were proven effective with higher germination rates than control sample with no treatment. Herbs and plants widely used for the ecological restoration were selected for germination rate analysis under treatment of microorganisms to determine ideal treatment conditions and medium for enhanced germination rate. Albizzia julibrissin, when submerged in a nutrient medium or distilled water, presented a decrease in germination period rather than increase in germination rate. When treated with microorganism culture solution (JM-2) for 24 hours, 90% germination was achieved in two days, which is sufficient evidence to conclude that such treatment accelerates the germination of Albizzia julibrissin. Germination period decreased for Lespedeza cyrtobotrya samples submerged in microorganism solution for 15 and 48 hours, however, increases in germination rates were not observed. Sample treated in the solution for 24 hours had increased germination rate and enhanced germination period. Microorganism solution treatment had a negative effect on germination for Lespedeza cuneata, unlike Lespedeza cyrtobotrya and Albizzia julibrissin. Microorganism treated seeds of Lepsedeza cuneata had a lower germination rate than that of the control with no treatment. However, submerging treatments in a nutrient medium or distilled water for 24 to 48 hours were proven effective with higher germination rates than control sample with no treatment.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.13 no.2
• /
• pp.42-51
• /
• 2010

Herbs and shrubs are employed for environmental restoration purposes. Among common herbs and shrubs, few species with low germination rates were selected and studied for enhanced germination rates and decreased germination times via soaking treatment. Rhus chinensis, incubator grown samples treated with the bacterial solution for 72hrs followed by immediate seeding showed the highest germination rate of 26.7% and germination period of 5.7 days, 3 days decrease from the control. Treatment of distilled water (t=3.79, p<0.01), nutrient broth (t=4.44, p<0.00) and bacterial solution (t=4.42, p<0.00) showed highly significant difference. In the case of soil tests, treating in the nutrient broth for 72 hrs followed by immediate seeding yielded the the highest germination rate of 23.3% with 7.3 days to initial germination, a decrease of 14.7 days with respect to the control. All the samples followed by immediate seeding showed significant difference (t=2.13, p<0.05). Incubator grown samples of Lespedeza cyrtobotrya showed different results. The incubator samples suspended for 48 hrs in distilled water followed by immediate seeding and 1 day drying displayed the highest germination rate of 96.7%, surpassing that of the control by 33.4%. The incubator samples treated with the distilled water and nutrient broth showed enhanced germination. But only the samples treated with distilled water and nutrient broth for 48hrs showed the increased germination in soil tests. All the sample treated for 24 hrs followed by immediate seeding or dried for 1 day showed initial germination as early as 1 day in incubator. The initial germinations were shortened in the samples treated with distilled water and nutrient broth for 48hrs in soil tests. Lespedeza cuneata incubator sample treated with nutrient broth for 24 hrs and dried for 1 day exhibited the highest germination rate of 83.3%, a 31.1% improvement over the control. The incubator samples treated with distilled water for 48 hrs (t=4.20, p<0.01) showed effective increase of germination. The treatment of distilled water (t=2.96, p<0.05) and bacterial solution (t=2.24, p<0.05) showed significant difference. The germination rates in soil were less than those of incubator and the control. The incubator samples treated with distilled water and bacterial solution displayed 1 day germination period, shortened by 1.3 days compared to the control. For soil grown samples, the samples treated with distilled water showed delayed initial germination and those treated with nutrient broth for 48hrs and bacterial solution for 72hrs shortened initial germination.

• Journal of Korea Society of Industrial Information Systems
• /
• v.16 no.2
• /
• pp.111-124
• /
• 2011

The apartment' share of the housing has steadily increased and property assets have been valued in importance as the one of asset value. Information retrieval system using internet is particularly active in the real estate market. However, user satisfaction on real estate information system is not very high, and there is a lack of research on real estate retrieval to increasing efficiency until now. This study presents a new knowledge information system developed to consider region-related factor and individual-related factor in the real estate market. In addition it enables a real estate knowledge system to search various preferential requirements for buyers such as school district, living convenience, easy maintenance as well as price. We made a survey of the search condition preference of experts on 30 real estate agents and then analyzed the result using AHP methodology. Furthermore, this research is to build apartment ontology using semantic web technologies to standardize various terminologies of apartment information and to show how it can be used to help buyers find apartments of the interest. After designing architecture of a real estate knowledge information system, this system is applied to the Busan real estate market to estimate the solutions of retrieval through Multi-Attribute Decision Making(MADM). Based on the results of the analysis, we endowed the buyer and expert's selected factors with weights in the system. Evaluation results indicate that this new system is to raise not only the value satisfaction of user, but also make it possible to effectively search and analyze the real estate through entropy analysis of MADM. This new system is to raise not only the value satisfaction of buyer's real estate, but also make it possible to effectively search and analyze the related real estate, consequently saving the searching cost of the buyers.

• Journal of the Korean Geographical Society
• /
• v.31 no.2
• /
• pp.255-267
• /
• 1996

The so-called Cultural and Historical Geography, sometimes called even as the Historical and Cultural Geography, has been defined as an interdiscipline that encompasses several disciplines in Korea. Scholars with various academic background have participated in the academic activity of the Association of Korean Cultural and Historical Geographers that was organized in the late 1980s. The academic majors of these participants are cultural geography, historical geography, history of geography, urban geography rural geography, economic geography, social and economic history anthropology, landscape architecture, and so on. It was in the 1960s that articles about the Cultural and Historical Geography appeared for the first time in the major academic journals in Korea. The pioneers of publishing these articles in the 1960s continued to conduct their research, while training students majoring in the Cultural and Historical Geography in the 1970s. All of these pioneers and their students were very active in the formation of identity vrith the Cultural and Historical Geography In the 1980s. Cultural and Historical Geography in Korea took a great leap forward both in quantity and in quality. The number of articles in the journal increased substantially, and the range of research theme and methodology extended in a great deal. It was also in the late 1980s that the Association of Korean Cultural and Historical Geographers was organized in Seoul, Korea, and this association began to publish a professional journal named Cultural and Historical Geography once a year. In the 1990s, single-authored books dealing with Korean Cultural and Historcial Geography began to appear in public as textbooks or research monographs. These books are expected to speed up the spread of Cultural and Historical Geography in Korea. If it continues to grow further both in quantity and in quality as it has been, Cultural and Historical Geography in Korea will be able to stand as an independent academic field in the future. Until then, however, it cannot but avoid its mission to contribute to an integrated development of human geography in Korea. It has already gained not only its own merit in the humanistic perspective but also its own strength in its synthetic understanding.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.9 no.4
• /
• pp.253-262
• /
• 2006

In this paper, collision analysis is carried out between two FRP fishing boats. A computer simulation with finite element method is used to accomplish this objective. At first, a detailed geometric model of the boat is constructed using 3-D CAD program. The formation of a finite element from a geometric data of the boats is carried out using HYPERMESH that is the commercial software for mesh generation and post processing. Twelve collision configurations are established by combining two kinds of contact angle($90^{\circ},\;135^{\circ}$) and three different speed(5, 10, 15knot) for small and large boats. Collision analysis is accomplished using DYNA3D. Stress distribution and deformation shape are investigated for each collision condition. In general, $90^{\circ}$ collision angle generate larger stress than $135^{\circ}$ case and the collision for two moving boats showed larger maximum stress than the case that one is moving and the other is stationary. When analysis is carried out until 150ms contact parts of two boats are broken for 10 and 15knot collision speed, in which maximum stress is larger than ultimate strength of the material.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.18 no.2
• /
• pp.153-159
• /
• 2012

This study gives the vertical motion analysis in multi-directional irregular waves using a commercial code(MAXSURF v.16) based on linear strip theory for a training ship. To verify the commercial code prior to the analysis, we guarantees the reliability of this paper's results using the commercial code by comparing with the results(Flokstra, 1974) of same hull and experimental conditions on a Panamax container. The analysis conditions are Beaufort wind scale No. 5($\bar{T}=5.46$, $H_{1/3}=2m$) based on ITTC wave spectrum, encounter angle Head & bow seas($150^{\circ}$) and Froude number Fn=0.257. Finally, we calculates heave RAO, pitch RAO and obtains the result of ship's response spectra for heave and pitch motions. In the motion response spectrum under the multi-directional irregular waves, heave motion reacts slightly high in short-crested waves and pitch motion reacts high in long-crested waves.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.24 no.2
• /
• pp.267-274
• /
• 2018

A variety of appendages are attached to coastal and offshore fishing boats to improve stability during navigation or fishing operations (stability performance and roll reduction). These appendages are generally classified into three types, which are shown in Fig. 1. The numerical calculations were conducted for the following eight cases: one case of a bare hull, three cases where a single appendage attached, three cases of a pair of appendages attached, and one case where all three appendages were attached. Table 1 presents the main dimensions of the bare hull and Table 2 describes the main dimensions of the three appendages. The fluid dynamic performance with regard to the three hull appendages was evaluated via CFD for the following cases: each of the appendages attached independently, a pair of appendages attached, and all three appendages attached simultaneously. The No. 1 appendage showed that pressure resistance was proportionally greater than friction resistances. Both Nos. 2 and 3 appendages showed comparable levels of pressure and friction resistances. The correlation between appendages was minimal in the case of pairs and Comparing the cases of the No. 2 appendage attached and all appendages attached, at 11 kn, the EHP showed an difference of 9 %.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.24 no.5
• /
• pp.583-590
• /
• 2018

The objective of this study is to present a resistance performance map developed using the dimension parameters of a bilge keel appendage attached to a fishing vessel using CFD. The dimension parameters consist of three length and breadth measures of a bilge keel appendage from nine selected cases. The size of a bilge keel attached to an existing ship should be 90 % of the ship length and 5 % of the ship breadth. In this study, bilge keels with a length of 63 %, 77 % and 90 % and a breadth of 5 %, 7 % and 9 % were considered based on ship length and breadth. The effective power in each of the nine cases was predicted using CFD. Based on results from an existing ship, effective power in the case with the shortest length and longest breath was reduced by 0.3 %. The case with the longest length and breadth showed an increase in effective power of 1.7 %. The case with the shortest length and breadth showed a decrease in effective power of 2.3 %. The proposed map can be utilized to select dimensions according to the sailing and work patterns of fishing vessels from the perspective of resistance performance.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.29 no.1
• /
• pp.29-36
• /
• 2016

Lifting lugs are frequently used to transport and to turn over blocks of ship and offshore structures in a shipyard. As the shipbuilding technology has been developed, blocks has become bigger and bigger, and block management technology takes a more important role in shipbuilding to enhance the productivity. For the sake of economy as well as safety in design of lug structure, needed is a more rational design procedure based on the ultimate strength derived through the rigorous non-linear structural analysis considering both the material and geometric non-linearity. This study is aimed at deriving the optimum design of T type lug structure which is frequently used in a shipyard. The optimum thickness of lug's main body is to be determined based on the results of non-linear strength analysis. As far as the present results for T type lugs having various capacity are concerned, it can be said that the present optimum design result can guarantee both safety and economy. From the fact that any regular trend cannot be found in weight reduction to the capacity of lugs, it seems to be necessary to review the current design procedure of lug structure. The present design procedure can be extensively used in design of various types of lug structures used in shipyard.