• Fashion & Textile Research Journal
• /
• v.13 no.4
• /
• pp.499-510
• /
• 2011

The response of the adolescents toward school uniform regulations according to personal character and clothing needs was studied. To carry out this experiment, questionnaires were administered to 514 students in middle and high schools in Seoul and Gyeonggi-do. The collected data were analyzed with Factor analysis(Varimax rotation), Cronbach's ${\alpha}$, Frequencies Statistics, t-test, ANOVA, and multiple regression analysis using the SPSS WIN 15.0. By surveying on actual condition of uniform regulation in school, it was found that the existing uniform regulation was unnecessarily strict and caused stress leading a negative educational effect. Based on the relationship among the degree of regulation, stress, and student attitude toward school uniform regulation, stress and negative attitude to uniform regulation increased as the degree of regulation increased, resulting in an decrease in observance behavior of students. Since the stress from the school uniform regulation can be reduced by establishing rational law, which induced voluntary conduct of student to obey, it is important for student to participate in establishment of adoptable and reasonable school uniform regulation law.

• KDI Journal of Economic Policy
• /
• v.42 no.1
• /
• pp.57-95
• /
• 2020

As a case study of an ex-post evaluation of regulations, in this paper I evaluate the 'uniform settlement rate requirement', a regulation that was introduced in 1986 and that was applied to the international telephone market in the U.S. for more than 20 years. In a bilateral market between the U.S. and a foreign country, each U.S. firm and its foreign partner jointly provide international telephone service in both directions, compensating each other for terminating incoming calls to their respective countries. The per-minute compensation amount for providing the termination service, referred to as the settlement rate, is determined by a bargaining process involving the two firms. In principle, each U.S. firm could have a different settlement rate for the same foreign country. In 1986, however, the Federal Communications Commission introduced the Uniform Settlement Rate Requirement (USRR), which required all U.S. firms to pay the same settlement rate to a given foreign country. The USRR significantly affected the relative bargaining positions of the U.S. and foreign firms, thereby changing negotiated settlement rates. This paper identifies two main routes through which the settlement rates are changed by the implementation of the USRR: the Competition-Induced-Incentive Effect and the Most-Favored-Nation Effect. I then empirically evaluate the USRR by estimating a bargaining model and conducting counterfactual experiments aimed at measuring the size of the two effects of the USRR. The experiments show remarkably large impacts due to the USRR. Requiring a uniform settlement rate, for instance, results in an average 32.2 percent increase in the negotiated settlement rates and an overall 13.7 percent ($3.43 billion) decrease in the total surplus in the U.S. These results provide very strong evidence against the implementation of the USRR in the 1990s and early 2000s.

• Journal of the Korean Society of Visualization
• /
• v.20 no.2
• /
• pp.38-44
• /
• 2022

Due to increasingly strict emission regulations for carbon-based fuels in the shipping industry, there is a significant motivation to investigate the alternative fuel. Ammonia is one of the attractive alternative fuels as a carbon-free fuel. Since ammonia has different properties such as high vapor pressure and low boiling point compared to conventional fuels, further research into ammonia spray behavior is important. In this work, the spray characteristics of ammonia and other fluids (ethanol, n-decane) were compared by using numerical simulation. The results show that the spray characteristics of ammonia differs from those of the others due to the occurrence of flash boiling. The narrow-dispersed spray with accelerated velocity at the center have been observed for ammonia. It is also found that droplets of ammonia achieve smaller diameter with more uniform distribution, leading to better atomization behavior compared to the others.

• Journal of Radiation Protection and Research
• /
• v.47 no.1
• /
• pp.1-7
• /
• 2022

Background: In Japan, new regulations that revise the dose limit for the lens of the eye (hereafter the lens), operational quantities, and measurement positions for the lens dose were enforced in April 2021. Based on the international safety standards, national guidelines, the results of the Radiation Safety Research Promotion Fund of the Nuclear Regulation Authority, and other studies, the Working Group of Radiation Protection Standardization Committee, the Japan Health Physics Society (JHPS) developed a guideline for radiation dose monitoring for the lens. Materials and Methods: The Working Group of the JHPS discussed the criteria of non-uniform exposure and the management criteria set not to exceed the dose limit for the lens. Results and Discussion: In July 2020, the JHPS guideline was published. The guideline consists of three parts: main text, explanations, and 26 examples. In the questions, the corresponding answers were prepared, and specific examples were provided to enable similar cases to be addressed. Conclusion: With the development of the guideline on radiation dose monitoring of the lens, radiation managers and workers will be able to smoothly comply with revised regulations and optimize radiation protection.

• Korean Journal of Construction Engineering and Management
• /
• v.21 no.5
• /
• pp.46-54
• /
• 2020

The construction industry has the most safety accidents among domestic industries. Special care must be taken because disasters in the construction industry lead to social problems caused by huge property losses and casualties. As a result of this, there is a growing awareness of disasters occurring in the construction industry, and government departments are tightening regulations on safety management. In particular, the OSHA (Occupational Safety and Health Agency) focuses on the expansion of protection targets and the clarification of responsibility in the full amendment OSHA. As a result, a study that focuses on safety management by client's responsibility is needed. In this study, the project performance capability assessment of construction project management contractors, which is being carried out with uniform assessment criteria without considering the characteristics of the construction project, is considered and all the amendments to the OSHA are considered, and the factors were derived for improvement measures.

• Journal of the Korea Institute of Building Construction
• /
• v.19 no.6
• /
• pp.557-566
• /
• 2019

The construction industry has the most safety accidents of any of the domestic industries. Special care must be taken because disasters in the construction industry lead to social problems caused by huge property losses and casualties. As a result, there is a growing awareness of disasters occurring in the construction industry, and government departments are tightening their regulations on safety management. In particular, the OSHA (Occupational Safety and Health Agency) focuses on the expansion of protection targets and the clarification of responsibility in the full amendment OSHA. As a result, a study that focuses on the client's responsibility for safety management is needed. In this study, the project performance capability assessment of construction project management contractors, which is being carried out with uniform assessment criteria without considering the characteristics of the construction project, is considered and all the amendments to the OSHA are considered, and the factors were derived for improvement measures.

• Korean Journal of Construction Engineering and Management
• /
• v.17 no.5
• /
• pp.22-34
• /
• 2016

The Project Delivery System (PDS) is used in mixed way without clear classification from tendering system and the standard itself that can be selected is set with project budget or estimated cost only. Essentially, the PDS should consider and reflect project characteristics and types, internal and external factors for the purpose of improving the lives of citizens and their welfare. However, the current status is not operated flexibly due to the given budget, period and uniform laws and regulations. In order to solve this problem, this study suggests a Decision Support Model to select the optimal PDS for public construction projects. The current problem of the PDS for public construction projects were identified and the application of a decision support model was proposed. Subsequently a decision-making model was suggested for each PDS using the identified factors and linear discriminant function of discriminant analysis. An additional questionnaire survey and actual practical case analysis were carried out to verify the effectiveness and applicability of the model to actual work. It can be used by adjusting the decision support model and detailed factors according to the specific characteristics of public organization, ability of person in charge and project type.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.39 no.1
• /
• pp.35-45
• /
• 2011

The landscape of Seoul was dynamically changed and developed with the rapid post-war economic growth. Seoul city designated a height regulation district to preserve and manage the city landscape and protect it from haphazard construction. The designation of a maximum height regulation district has obvious purpose and simple regulations which makes the implementation and management easy to apply yet the altitude restriction lacks an objective basis for its enforcement. Many studies have been done and the current uniform height regulation requires more objective and logical guidelines. This study selected the Bukhan Mountain area, a National Park designated to protect the environment, to present a new landscape height guideline to minimize environmental degradation and to harmonize the artificial and natural landscapes of the area. Document research was done to identify the regulation types(absolute height regulation, view line regulation, oblique line restriction regulation) and principles for height regulation district establishment, acknowledge the current status and issues of the Bukhan Mountain area's maximum height regulation district. Gangbuk-Gu was chosen as the site and survey was conducted on outstanding view points and view corridors of residents. From document research, an appropriate landscape height guideline was selected and applied to Gangbuk-Gu. According to the guideline, suitable heights for buildings were suggested. These were then applied to three-dimensional simulations and a final guideline was suggested.