• Korean Journal of Construction Engineering and Management
• /
• v.20 no.1
• /
• pp.62-72
• /
• 2019

Future prospects for the North Korean construction market created by reunification of the Korean Peninsula has consistently been recognized as highly promising. Although rehabilitation projects of the deteriorating construction facilities in North Korea are expected to serve as new source of growth engine to South Korea in future, the status quo of each infrastructure in the North are described verbosely with signs of subjective translation. There has been limited approach on depicting the condition and performance of the North Korean facilities based on quantitative and systematic approach. Thus, this study has been conducted under a twofold purpose. First, this study proposes a performance indicator for identifying the status quo of the major construction facilities in North Korea based on a quantitative approach. Second, this study applies the developed indicator to visualize the results on the conditions of each facility in the form of a report card. This expected to serve as a basis on determining the appropriate level of the construction infrastructure in North Korea and estimating the range of rehabilitation projects along with the investment cost.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2010.03a
• /
• pp.1315-1323
• /
• 2010

This paper deals with a case study on a unique slope failure in a liner system of a municipal solid waste containment facility during construction because the sliding interface is not the geomembrane/compacted low permeability soil liner (LPSL) but a soil/soil interface within the LPSL. From the case study, it is concluded that compaction of the LPSL should ensure that each lift is kneaded into the lower lift so a weak interface is not created in the LPSL, and the LPSL moisture content should be controlled so it does not exceed the specified value, .e.g., 3% - 4% wet of optimum, because it can lead to a weak interface in the LPSL. In addition, drainage materials should be placed over the geomembrane from the slope toe to the top to reduce the shear stresses applied to the weakest interface, and equipment should not move laterally across the slope if it is unsupported but along the slope while placing the cover soil from bottom to top.

• Plant Journal
• /
• v.9 no.3
• /
• pp.48-52
• /
• 2013

In this study, the internal flow field of SCR Denitrification Plant was simulated by using Computational Fluid Dynamics(CFD). In order to analyze the uniformity of flow field, an interpretation on the pre-existing facilities was performed, and some moot points were identified and compensated through this analysis. The compensatory methods include the installation of the Porous Plate below the bottom of the Baffle to create uniform flow and also, and the Guide Vane was also placed in the bend of pipe to guide the flow uniformly. Lastly, the Baffle was installed to deduct equalized space distribution of the air flow, initially flowed into the SCR Plant.

• Journal of the Korean housing association
• /
• v.26 no.6
• /
• pp.181-190
• /
• 2015

This study emphasizes a new senior housing type which can provide individual housing units and common facilities for retirees, particularly who will be retired from universities. It is called a university-based retirement community. This study conducted a questionnaire survey to investigate future residents' needs for architectural environments that included housing types, common facility features, and proximity, and also development methods in response to the university involvement levels. The survey questionnaire was administered in one national university in Korea. A total of 214 responses were valid for statistical analyses. Major findings are as follows: Over 65% of the respondents were willing to live in the university-based retirement community. Regarding the location of the community, they responded the community would not need to be located on campus. Preferred common facilities in the UBRC were indoor fitness centers, the shuttle bus stops connecting to the adjacent areas, and bath and sauna facilities. The respondents emphasized university's contribution toward offering educational programs for UBRC residents. Lastly, their responses to the university role and involvement in the development and construction process were identified. This study results are expected to provide essential information for facilitating the Korean model of university-based retirement communities in the future.

• Plant Journal
• /
• v.8 no.2
• /
• pp.59-69
• /
• 2012

This study focuses on avoiding the failures from the wrong selections by experiences as simulation programs is not available, and suggests the methods which effectively select the alternatives when the selected model is not appropriate for the original plan. First, CC8800-1K of DEMAG has the longest boom whose length is 216 m at the maximum. The combination of the boom is feasible to second level except for MANITIWOC M 2250 (M-1200 RINGER) which is possible to third level. Second, the angle of boom is from 20 degrees to 82 degrees. Suitable angle to work is in the 55-78 degrees. The working load of crawler type and hydraulic one to be applied is 75-85% in the critical loads capacity. As increasing operating radius, crawler type is a favorable position over hydraulic one. Lastly, related problems were verified through examination by suggestions for the design of the selection methods for the case analysis. The major problems are stemming from the selection based on its experiences, unreasonable demand for the existing facility and repeated selections by the designer who accumulates his experiences via same or similar projects.

• Wind and Structures
• /
• v.36 no.4
• /
• pp.263-275
• /
• 2023

As a new kind of construction facility for high rise buildings, the integral steel platform scaffold system (ISPS) consisting of the steel skeleton and suspended scaffold faces high wind during the construction procedure. The lattice structure type and existence of core tubes both make it difficult to estimate the wind load and calculate the wind-induced responses. In this study, an aeroelastic model with a geometry scale ratio of 1:25 based on the ISPS for Shanghai Tower, with the representative square profile, is manufactured and then tested in a wind tunnel. The first mode of the prototype ISPS is a torsional one with a frequency of only 0.68 Hz, and the model survives under extreme wind speed up to 50 m/s. The static wind load and wind vibration factors are derived based on the test result and supplementary finite element analysis, offering a reference for the following ISPS design. The spacer at the bottom of the suspended scaffold is suggested to be long enough to touch the core tube in the initial status to prevent the collision. Besides, aerodynamic wind loads and cross-wind loads are suggested to be included in the structural design of the ISPS.

• KIEAE Journal
• /
• v.7 no.3
• /
• pp.81-88
• /
• 2007

As of August 2005, there are 9,007 facilities for public primary, middle and high schools in Korea. But because of depopulation, hereafter it is expected to allocate much more budget and interest to utilizing the existing facilities reasonably rather than new buildings construction. At present the maintenance of educational facilities is depend on not a preventive but a post preservation. And there is no established maintenance organization and system, which causes both facility deterioration and squandering of the nation's resources. Thus the object of this paper is to examine a maintenance system of established public school facilities and to improve the system which is enable to maximize the efficiency for the existing maintenance organization.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2006.11a
• /
• pp.98-102
• /
• 2006

This study was conducted to derive a priority of investment in educational facilities by collecting and analyzing investment records from elementary, middle, and high schools in Chung Nam area. In addition, the AHP survey and analysis were performed in order to draw the priority item in the educational facility improvement. Students, parents, teachers and a educational facility managers from those schools provided their opinions and data for the AHP study. As a result of the study, the actual investment-cost and a lack of educational facilities were found. A priority item based on the above study was derived which can be used to increase user's satisfaction in the educational facilities. The result of this study can be used as a basis to improve the environment of the educational facilities.

• Korean Journal of Construction Engineering and Management
• /
• v.17 no.6
• /
• pp.31-39
• /
• 2016

This study aims to give suggestions based on survey to improve the quality of Global Construction Engineer Training Program in line with the government goals. The domestic construction industry in Korea has kept shrinking, whereas the global construction market is forecasted to keep expanding in the future. It has become an urgent task to be taken up for construction contractors and engineering firms so as to improve their capacity, in particular, in the fields of planning, management, finance as well as engineering. To deal with the lack of capacity of the domestic engineers and to help them emerge as global players in the competitive overseas construction market, the Ministry of Land, Infrastructure and Transport of the Korean government has designed a program called 'Global Construction Engineer Training Program.' The eligible target of the training program is mid-career professionals who are working for the construction contractors or engineering firms. To draw suggestions for this program, an importance-satisfaction analysis is conducted to evaluate the effectiveness of the training program implemented by the S University. The S University, along with C University, was selected as an implementation organization of the program in 2014 by the government. Through an email survey, the participating students in the program were asked questions on the importance and satisfaction against 17 indicators classified into 5 categories: instruction method, professional knowledge of instructors, contents of program, curriculum, and facility and environment. The survey results show that students are satisfied with the overall quality of the program, but it was also found that they want the program opens more coursework on practical application of knowledge, case studies, and global networking.

• Journal of the Korea Institute of Building Construction
• /
• v.16 no.6
• /
• pp.535-544
• /
• 2016

Korean government is promoting "K-Smart City" to overseas market which is an integrated solution of construction industry with ICT(Information and Communciations Technologies) industry. Due to nature of Smart City, construction quality and the development quality of the facilities need to be established to improve the overall quality. However, guidelines and regulations to initiate quality control for Smart City are behind the actual demand. This deficiency is bringing quality control for construction and ICT to be controlled separately causing lack of synergy and resulting in overall quality degradation. This research is designed to improve the construction quality of Smart City during its establishment stage by integrating ICT system with on-site construction (Integrated control center and on-site equipment). The adoption of this research to a real Smart City case had resulted in 22% reduction of construction inspection failure (Audit), and also allowed Construction Company to pre-align quality control of all purchased items of ICT Infra that resulted in 18% reduction of nonconformity, thus contributing to an overall quality improvement. This research is expected to be used widely among all construction industry of Smart City.