• Journal of IKEEE
• /
• v.25 no.1
• /
• pp.109-115
• /
• 2021

In this paper, the fine dust detecting terminal which can transmit data in real time was developed. The terminal used a wide spreading LTE network and was powered by solarcell and battery for easy installation and independent operation, because it did not need the wired power grid or wired communication network. The data showed the possibility of forecasting fine dust changes by analyzing with the data from public meteorologic data. The developed terminal will be helpful for predicting and analyse fine dust's more precise flow and effect on environment with an easy installation on any places.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.22 no.2
• /
• pp.97-101
• /
• 2022

In this paper, we propose a method of measuring Fine dust in images using K-means and Sobel-mask based edge detection techniques using CCTV. The proposed algorithm collects images using a CCTV camera and designates an image range through a region of interest. When clustering is completed by applying the K-means algorithm, outline is detected through Sobel-mask, edge strength is measured, and the concentration of fine dust is determined based on the measured data. The proposed method extracts the contour of the mountain range using the characteristics of Sobel-mask, which has an advantage in diagonal measurement, and shows the difference in detection according to the concentration of fine dust as an experimental result.

• Asian Pacific Journal of Cancer Prevention
• /
• v.16 no.10
• /
• pp.4339-4345
• /
• 2015

Occupational exposure to wood dust is one cause of nasopharyngeal cancer (NPC); however, assessing this exposure remains problematic. Therefore, the objective of this study was to develop a semi-quantitative exposure assessment method and then utilize it to evaluate the association between occupational exposure to wood dust and the development of NPC. In addition, variations in risk by histology were examined. A case-control study was conducted with 327 newly diagnosed cases of NPC at the National Cancer Institute and regional cancer centers in Thailand with 1:1 controls matched for age, gender and geographical residence. Occupational information was obtained through personal interviews. The potential probability, frequency and intensity of exposure to wood dust were assessed on a job-by-job basis by experienced experts. Analysis was performed by conditional logistic regression and presented in odds ratio (ORs) estimates and 95% confidence intervals (CI). Overall, a non significant relationship between occupational wood dust exposure and NPC risk for all subjects was observed (ORs=1.61, 95%CI 0.99-2.59); however, the risk became significant when analyses focused on types 2 and 3 of NPC (ORs=1.62, 95%CI 1.03-2.74). The significant association was stronger for those exposed to wood dust for > 10 year (ORs=2.26, 95%CI 1.10-4.63), for those with first-time exposure at age > 25 year (ORs=2.07, 95%CI 1.08-3.94), and for those who had a high cumulative exposure (ORs=2.17, 95%CI 1.03-4.58) when compared with those considered unexposed. In conclusion, wood dust is likely to be associated with an increased risk of type 2 or 3 NPC in the Thai population. The results of this study show that semi-quantitative exposure assessment is suitable for occupational exposure assessment in a case control study and complements the information from self-reporting.

• Publications of The Korean Astronomical Society
• /
• v.27 no.4
• /
• pp.253-256
• /
• 2012

We present the IRC images of M51, a pair of interacting galaxies. Given the high angular resolution (7.4") and the wide field of view (~ 10') covering almost the entire M51 system, we investigate dust properties and their connection to the spiral arm structure. We have applied image-filtering processes including the wavelet analysis to the N3 image, which traces the total stellar mass best among the IRC bands. From this filtered image, the center, arm, and interarm regions are defined. A color, or flux ratio among the MIR bands, has been measured at each pixel (3.7" in size). We find a wide variety of S7/S11 with a difference between arm and interarm regions. We also find that at some positions S11 seems to be higher than predicted by MW dust models. Estimated contributions from the stellar continuum and gas emission lines to the band are not enough to explain this discrepancy. From these results, we deduce that the PAH ionization condition and its fraction to the total dust mass in M51 are different from those in MW.

• Journal of Korean Society for Atmospheric Environment
• /
• v.31 no.2
• /
• pp.105-117
• /
• 2015

Sources related to road dust is one of the biggest sources, which is responsible for a large portion of emission. In particular, PM2.5 is a potential cause for respiratory diseases, thus it should be managed and a mitigation plan using results of statistical apportionment modeling such as chemical mass balance needs to be established. Recently, identifying sources of PM2.5 and analyzing the contribution of the road dust through a contribution assessment is required. Therefore, this study provides the chemical source profiles of PM2.5 using IC, GC/MS, OCEC, and XRF for both paved sidewalk and paved roadway collected at seven different sampling sites. As a result, for paved sidewalk, $NH{_4}^+$ (70%), $NO{_3}^-$ (12%), $PO{_4}^-$ (9%), and $SO{_4}^{2-}$ (9%) have been analyzed in PM2.5 mass. Major molecular marker such as Si has been indicated as $12.0{\pm}3.4%$ and $13.6{\pm}6.9%$ for paved sidewalk and roadway, respectively. PAHs such as Fluoranthene, Pyrene, Chrysene, and 1,3,5-Triphenylbenzene are suggested as molecular markers for road dust.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.20 no.11
• /
• pp.86-91
• /
• 2021

Recently, functional clothes that can reduce deposition and/or penetration of fine dust have been developed. However, there are no methods to quantitatively evaluate the performance of these clothes. In this study, we developed a method to contaminate a fabric using fine dust and established an approach to quantitatively assess the degree of particle contamination on the fabric surface. Silicate powder was chosen as the particle to simulate fine dust because silicate particles are fluorescent under UV light; therefore, they can be distinguished from any color of non-fluorescent fabric surface. A camera with a high-resolution lens system was used to scan the surface of the contaminated fabric surface, and the degree of particle contamination of the fabric surface was analyzed in terms of the pixels corresponding to the area of the fabric surface contaminated by silicate particles. Finished or unfinished nylon fabrics as well as cotton fabrics were contaminated with silicate particles, and their surfaces were scanned using the established camera. The proposed assessment method was found to be useful for quantitatively comparing the degree of particle contamination of the fabrics.

• Journal of the Korean Society for Heat Treatment
• /
• v.36 no.1
• /
• pp.22-32
• /
• 2023

In general, when scrap is dissolved in an electric arc furnace, the amount of electric furnace steel dust (EAFD) generated is about 1.5% of the scrap charge amount, and the electric furnace steel dust collected by the bag filter is charged into the Rotary Kiln or Rotary Hearth Furnace (RHF), and the zinc component is recovered as crude zinc oxide, at which time a clinker of Fe-Base is generated. In this research, first, for the efficient resource conversion of electric furnace steel dust, a reduction and roasting experiment was conducted and the reaction kinetics was examined. As a result of the experiment, it was observed that the reduction and roasting reaction was actively conducted in the range of 1100~1150℃, and melting occurred in the range of 1250℃. In the past, this clinker was widely used as a roadbed material for road construction and an Fe-Source for cement production, but in recent years, it has been mainly reclaimed due to strengthening environmental standards. However, landfill treatment is by no means a desirable treatment method due to environmental pollution caused by leachate, expensive landfill costs, and waste of Fe resources. Therefore, in order to more actively recycle the Fe component in the clinker, first of all the clinker was pulverized into an optimal particle size, and anthracite and binder (starch) were added to the magnetic material obtained by specific gravity and magnetic separation for briquet. As a experimental results, it was possible to efficiently separate clinker as Fe component and other slag component by specific gravity and magnetic force. As a results of loading and dissolving the manufactured briquet clinker in an electric arc furnace, it was observed that the unit of power and production yield were clearly improved and the carbon addition effect in molten metal was also somewhat.

• Biomedical Science Letters
• /
• v.20 no.1
• /
• pp.39-42
• /
• 2014

Asthma is an allergic inflammation and house dust mite (HDM) is a major allergen to induce asthma pathogenesis. Regulation of eosinophil apoptosis is an essential immune process and its dysregulation is implicated in asthma. In the present study, we examined the effects of HDM on spontaneous apoptosis of asthmatic eosinophils and on cytokine secretion in eosinophils of normal subjects including non-atopic and atopic normal. Extract of Dermatophagoides pteronissinus (DP) inhibited eosinophil apoptosis in a time-dependent manner. DP increased the secretion of G-CSF, GM-SCF, and IL-4, which is involved in suppression of eosinophil apoptosis, but IL-5 expression was not altered after DP stimulation. DP also elevated the release of IL-6, IL-8, tumor necrosis factor-${\alpha}$ (TNF-${\alpha}$) and CCL2, which are anti-apoptotic or survival factors. The secretion of G-CSF, GM-CSF, IL-6, IL-8, and TNF-${\alpha}$ due to DP is higher in atopic normal than that in non-atopic normal. In conclusion, DP increases the survival of eosinophils and its mechanism may be associated with cytokine release. These findings may enable elucidation of asthma pathogenesis induced by HDM.

• Journal of Technologic Dentistry
• /
• v.33 no.1
• /
• pp.93-102
• /
• 2011

Purpose: The study aimed to evaluate working environment for dental technician by measuring dust level, ventilation conditions and the use of personal protective equipment and to provide basic information required to improve working environment and develop health education programs for dental technician. Methods: A total of 240 dental technician who are registered with the Daegu Association of Dental technician and working at 34 dental laboratories participated in the study. And the dust level was measured at 21 different spots in 16 dental laboratories out of 34. Results: Of 34 dental laboratories, 31 (91.2%) were equipped with a ventilator, but the remaining 3 (8.8%) did not have a ventilator. By the number of ventilator, 1 to 3 ventilators were found in 22 dental laboratories (71.0%), 4 to 6 ventilators were in 7 laboratories (22.5%) and more than 7 ventilators in 2 laboratories(6.5%). According to the frequence of changing filters in dust collector, 20 dental laboratories (58.9%) changed filters every four weeks, 10 laboratories (29.4%) changed them every six weeks and 4 laboratories (11.7%) changed them every eight weeks. Of total respondents, 114 (61.3%) said they wore a mask all the time while working, 56 (29.6%) said they frequently wore a mask, 19 (10.1%) said they did not wear a mask. As for the type of masks, 159 (84.1%) used a disposable mask, 25 (13.2%) used a cotton mask and 5 (2.7%) used an anti-dust mask. For dust sat on their outfits while working, 102 (54.0%) shook their uniforms inside workplace to keep dust off the uniforms, 64 (33.9%) did not anything until they wash their uniforms and 23 (12.1%) shook their uniforms outside workplace to keep dust off the uniforms. Of total respondents, 182 (96.3%) had a particle in their eyes while carrying out grinding work. Based on the measurement of floating dust at workplace, 3 dental laboratories showed dust concentration exceeding the minimum level of 10 mg/$m^3$ allowed under the permit for environment. Of those, 1 laboratory had the dust concentration that was more than 1.5 times higher than the minimum level. Dust concentration was higher in laboratories that used a dust collector with 0.5 horse power and changed filters more than 3 weeks ago. Dust comprised of nickel (more than 70%), chrome (9%) and others. The mean chrome concentration was more than twice higher than the minimum permissible level of 0.5 mg/$m^3$. There were two laboratories that showed chrome concentration exceeding the level of 0.4 mg/$m^3$. Like dust concentration, chrome level was higher in laboratories that used a dust collector with 0.5 horse power and changed filters more than 3 weeks ago. There were six laboratories that had nickel concentration exceeding the minimum permissible level of 1 mg/$m^3$. Of those, one laboratory had nickel concentration that was more than three times higher than the minimum permissible level. Nickel concentration was also higher in laboratories that used a dust collector with 0.5 horse power and changed filters more than 3 weeks ago. Conclusion: It is not likely that heavy metal concentrations found in the study constitute respiratory dust. It is however necessary for health of dental technician to apply the Industrial Safety and Healthy Law to dental laboratories and make recommendations for the use of personal protective equipment, installation of a proper number of ventilators, more frequent change of filters in dust collector and improved ventilation for polishing work. At the same time, dental technician need education on how to use personal protective equipment and how to efficiently remove dust from their uniforms.

• Journal of the Korean Society of Safety
• /
• v.19 no.1
• /
• pp.137-140
• /
• 2004

The minimum ignition temperature at which the dust cloud can spontaneously ignite is considered to be very important in industries to prevent explosion occurring in hot surfaces. This paper has dealt with the experimental study of the determination of minimum ignition temperature of Hydroxy Propyl Methyl Cellulose (HPMC) dust cloud. We have used the Godbert-Greenwald Furnace Apparatus to determine the ignition temperature and limiting oxyten concentration for dust could. The experimental determinations on the minimum ignition temperature were carried out with various particle size with nominal diameters 45, 75 and 106${\mu}m$. The limiting oxygen concentration of dust cloud was determinated for the smaller size(45${\mu}m$) HPMC. Minimum ignition temperature of dust cloud was at 364$^{\circ}C$ for the concentration of 2.5g/L in the air and became higher with the increasing of nitrogen concentration. It was also found that the ignition didn't occur when the oxygen concentration was below 10%, and limiting oxygen concentration is at 11%.