• 한국산학기술학회논문지
• /
• 제12권7호
• /
• pp.3296-3301
• /
• 2011

배수성포장은 다양한 장점을 가지고 있어 점차 보편화되고 있는데, 주요 효과로는 수막현상 최소화, 빗물에 의한 미끄럼저항값을 일정하게 유지하고, 차량과 포장체 사이에서 발생하는 소음을 저감시켜준다. 도로소음 및 수막현상 감소효과에 대한 많은 연구가 수행되었다. 본 연구의 목적은 배수성 포장 표층의 역학적 특성(강도 및 탄성계수)을 평가하는 것이다. 시험에 사용된 시편은 선회다짐기를 이용하여 제작하였다. 배수성포장의 상부표층 및 하부표층용 시편을 실험에 이용하였다. 마샬안정도시험(KS F 2377), 자유단공진주시험(KS F 2730), 일축압축시험(KS F 2314), 슈미트햄머시험 등을 수행하였다. 일축압축강도 및 슈미트햄머를 이용한 강도값을 비교 분석하였다.

• 한국지반공학회논문집
• /
• 제23권11호
• /
• pp.15-26
• /
• 2007

L. A. 마모율 시험은 건설용 골재의 강도를 확인하기 위한 방법으로 주로 석산의 모암을 대상으로 시행하여 왔다. 본 연구는 경상분지 퇴적암이 집중 분포되어 있는 25 지점에서 지질학적 특성을 대표할 수 있는 324 브록의 시료를 채취하여 L. A. 마모율시험으로 각종 공학지수(일축 압축강도, 압열 인장강도, 탄성계수, 점하중 강도지수, Schmidt 해머 반발지수)를 추정하기 위한 실험을 시행하여 회귀 분석법으로 서로간의 상관성을 확인한 결과, 상호간 좋은 상관관계가 있음을 확인하였다. 이 방법이 다른 공학지수를 추정함에 손색이 없으므로 이후에도 많은 활용이 있기를 기대한다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1999년도 봄 학술발표회 논문집
• /
• pp.159-166
• /
• 1999

One of the most general methods that can evaluate the rippability is the seismic exploration. However, most field engineers have hardly used the seismic exploration. Instead of using the seismic exploration, they have usually used rock hammer and naked eyes to confirm the degree of rippability for soil, ripping rock and blasting rock. Therefore, to excavate the ground rationally, it is required to establish a quantitative criterion that can be used for distinguishing rippability. In this study, we find out the characteristics of rock strength through laboratory and field tests. The weathering condition of rock exposed to air due to excavation of soil layer and the variation of rock strength caused by weathering were investigated. A relationship between rock strength values that are obtained from uniaxial compression test, slaking durability test, point load test, schmidt hammer test and absorption ratio test is analyzed. The relationship is expressed in a form of equation by which we can evaluate the rock strengths obtained from simple laboratory and field tests. To evaluate rippability in a reasonable manner, a quantitative approach is proposed and a check list of rippability is developed based on the proposed methodology. It is recommended to modify the proposed method for evaluation of rippability in the field.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 춘계 학술발표회 제16권1호
• /
• pp.392-395
• /
• 2004

When a concrete member is damaged by fire accident, it can lose its strength. And the degradation rate of losing its strength affected by many environmental conditions. But there is few research for equation for strength evaluation of fire-damaged concrete. Besides, it is impossible to destruct structural member from the building for the evaluation. So, I will suggest a new equation for strength evaluation of fire-damaged RC beam using non-destructive test. For this purpose, the researchers are exploring the performance of non-destructive testing methods using Ultrasonic test, Schmidt Hammer test and Coring test against fire damaged concrete specimen.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 춘계학술발표회 논문집(I)
• /
• pp.330-333
• /
• 2006

In this paper experimental tests were performed to evaluate velocities of the acoustic waves through prestressed concrete beam and source locations using AE technique. Seven AE sensors are mounted on the surface of 5m length test beam with equal spacing and using Schmidt Hammer AE events are made 18 locations. The velocities of AE signals are evaluated using the time differences of arrival times and the distances between the AE source loactions and the AE sensor locations. In addition, using the Least Square Method, the AE source locations are re-evaluated reversely using both of the arrival times and the velocities of AE signals. Test results show the average velocity of the AE signals is about 4,000m/sec and the velocity decreased with the increase of the trevalling times due to the effect of attenuation. Based on the estimation of the source locations, it is observed that the accuracy of source location is increased when the velocity of each AE sensor used rather than the average velocity.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 춘계 학술발표회 논문집(II)
• /
• pp.597-600
• /
• 2006

In Marine Land underground reinforced concrete structures, such as electric box power structure, water and chloride ion penetrated into concrete through the cracks of concrete and its permeable property, cause the corrosion of reinforcing steel bar, which accelerates the expansive cracks and deterioration of concrete. The purpose of this paper is to evaluate on deterioration of durability concrete through instrumental analysis such as schmidt hammer and carbonation, chloride content. Under the reclaimed marine land, the main cause of deterioration of concrete structures is the steel corrosion due to the penetration of chlorides and the deterioration of outer concrete itself by chemical attack.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 추계 학술발표회 제17권2호
• /
• pp.13-16
• /
• 2005

This study is aimed to investigate the strength variation of fire-damaged reinforced concrete column by non-destructive test. It is studied to infer the recovery degree of residual strength of fire-damaged concrete. For measuring the surface hardness of RC columns. Schmidt hammer test is used. Testing is performed three-times: before fire test, directly after fire test and after 20 days.

• Geomechanics and Engineering
• /
• 제15권3호
• /
• pp.919-925
• /
• 2018

Stress-strain responses of weak-to-strong carbonate rocks used for tunnel construction were studied. The analysis of applicability of exponential stress-strain models based on Haldane's distribution function is presented. It is revealed that these exponential equations presented in transformed forms allow us to predict stress-strain relationships over the whole pre-failure strain range without mechanical testing of rock samples under compression using a press machine and to avoid measurements of axial failure strains for which relatively large values of compressive stress are required. In this study, only one point measurement (small strain at small stress) using indentation test and uniaxial compressive strength determined by a standard Schmidt hammer are considered as input parameters to predict stress-strain response from zero strain/zero stress up to failure. Observations show good predictive capabilities of transformed stress-stress models for weak-to-strong (${\sigma}_c$ <100 MPa) heterogeneous carbonate rocks exhibiting small (< 0.5 %), intermediate (< 1 %) and large (> 1 %) axial strains.

• 한국재난관리표준학회지
• /
• 제2권4호
• /
• pp.59-65
• /
• 2009

현재 대부분 사용되고 있는 반발경도법을 이용한 강도 추정식을 서울의 대표적인 지하구조물에 적용할 경우 준공년도에 따른 재령계수의 적용이 부적합한 것으로 판단됨에 따라 본 연구에서는 최근 8년간 수행된 서울지하철 정밀안전진단결과를 이용하여 코어의 일축압축강도와 동일위치에서 실시된 반발경도 시험결과와의 상관관계에 준공년도를 고려하여 공용중인 박스 및 터널구조물에 대한 합리적인 강도평가 추정식을 제시하였다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 봄 학술발표회 논문집
• /
• pp.741-744
• /
• 2003

In this study, the influence of chemical admixture on early strength development of concrete is discussed. According to the results, fluidity with variation of kinds of chemical admixture is lower in the case of acceleration type than in the case of normal type. Setting time of naphthalene acceleration type is shortened by I hour, and that of melamine is nearly same, but that of polycarbonic acid is somewhat retarded in comparison with that of naphthalene normal type. Early compressive strength gains 5MPa in about 18hours regardless of the kinds of chemical admixture. But as time elapses, compressive strength is higher in order of polycarbonic acid, naphthalene and melamine type. The relativity between compressive strength and the rebound value of P-type schmidt hammer is also favorable at early age, and compressive strength of 5MPa is estimated at the rebound value of 22.