• 한국주조공학회지
• /
• 제32권3호
• /
• pp.138-143
• /
• 2012

This steel has been synthesized integrating concepts from Austempering Ductile Cast Iron (ADI) technology. While ADI has excellent mechanical and physical properties, the Young's modules of ADI is approximately 20% lower than steel. In addition, the presence of graphite nodules in ADI can be sites of crack initiation, where fracture takes place at graphite matrix interface. Because of this limitations of ADI, there has been a growing interest in austempered steels as structural materials in resent years. In this investigation, a new steel with microstructure composed of ferrite and austenite and with simultaneous high tensile strength (1,150 MPa) and high ductility (33%) was developed. The goal of this investigation is to obtain a better understanding of deformation and transformation behaviour in high carbon retained austenite(${\gamma}_{HC}$) and over-saturated ferrite(${\alpha}$) during the plastic deformation. A detailed study of the microstructure of this steel was carried out by means of X-ray diffraction (XRD) and electron back scattering diffraction (EBSD) technic. In this way it was shown that BCC phase (BCC) took up the larger part of the nominal strain whereas the a part of retained austenite responded to the mechanincal load by partial martensite transformation, and misorientation change in the retained austenite after plastic strain could be attributed to the large elongation.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제50권9호
• /
• pp.456-465
• /
• 2001

In this paper, breakdown voltages in $SF_6-N_2$ mixtures were experimentally investigated to understand characteristics of dielectric strength and physical phenomena in nonuniform field disturbed by a needle shape protrusion. The test voltages are the lightning impulse$(\pm1.2/44 \mus)$ and the damped oscillatory impulse$(\pm400 ns / 0.83 MHz)$ voltages which can be occurred by the operation of disconnecting switches in gas-insulated switchgears(GIS). The effects of the polarity and wave shape of the test voltages, and the gas pressure on the V-t characteristics were in detail examined. The V-t characteristic curves were measured in different two ways : (1) one is the method by taking the maximum voltage recorded at or prior to breakdown against the time to breakdown, that is, the Procedures recommended in IEC 60060-1, (2) the other is the method by taking the voltage at the instant of chopping against the time to breakdown. As a result, the V-t characteristics of $SF_6-N_2$ mixtures in nonuniform electric field were significantly affected by the polarity and wave shape of the applied voltages. The positive breakdown voltages resulted in lower breakdown voltages in the time ranges considered, and the V-t curves for the negative oscillatory impulse voltage were extended over the longer time range. For the lightning impulse voltages, the V-t curves obtained by IEC Pub. 60060-1 were nearly same with the V-t curves obtained by the voltage at the instant of chopping against the time to breakdown. It is clear that the actual breakdown voltages were much lower than the maximum voltages appearing at or prior to breakdown because of the displacement current produced as a result of the dV/dt during the oscillatory transient voltage app1ication. The scattering of the negative actual breakdown voltages was much larger than that of the positive.

• 자원리싸이클링
• /
• 제24권3호
• /
• pp.34-43
• /
• 2015

철강 산업에서의 원재료는 생산성, 품질, 가격경쟁력에 결정적인 역할을 하고 있다. 철강제품의 원재료를 함철부산물로 활용한다면, 함철부산물을 처리하기 위한 비용 및 환경오염문제를 해결할 뿐만 아니라 가격경쟁력을 높일 수 있다. 함철부산물들은 대부분 작읍입도를 가지고 있어서, 제강공정 내에 직접 투입하게 되면 열 유동 및 원료 비산 등의 문제가 발생하게 된다. 이러한 문제점을 해결하고 추가적인 환원을 유도하기 위해 철원에 탄재를 혼합한 뒤 단괴를 성형하여 제강공정 내에 투입하는 방법이 연구되고 있다. 본 연구에서는 함철부산물에 탄재를 혼합하여 단괴를 성형하는 방법에 대해 연구하였다. 함철부산물, 탄재, 융제, 바인더에 따른 CCBI (carbon composite briquette iron)의 성형성 및 압축강도를 확인하였다.

• 한국전산구조공학회논문집
• /
• 제24권5호
• /
• pp.499-506
• /
• 2011

본 연구에서는 컴퓨터 시뮬레이션을 통해 복합소재 교량용 방호울타리의 성능을 분석하였다. 복합소재 방호울타리는 SB4등급을 선정하였다. 복합소재의 적층을 고려하기 위해 LS-DYNA에서 제공하는 재료모델 MAT58을 사용하였다. 복합소재는 섬유와 수지의 종류 및 섬유의 방향에 따라 성능이 상이하다. 수지는 폴리우레탄, 섬유는 유리섬유를 사용하였다. 본 논문에서는 섬유의 방향성이 다른 3가지 적층 설계안에 대해서 충돌 시뮬레이션을 수행하여 성능을 비교 평가하였다. 실차충돌 실무 업무편람에 따라 구조적 강도성능, 탑승자 보호성능, 충돌 후 차량의 거동, 가드레일의 비산에 대한 성능 평가를 실시하였다. 그 결과 적층 설계의 횡 방향 섬유의 양이 많아질수록 충돌 시뮬레이션에서 더 좋은 성능을 나타내었다.

• Nuclear Engineering and Technology
• /
• 제52권3호
• /
• pp.621-625
• /
• 2020

Cast austenitic stainless steel (CASS) is used for fabricating different components of the primary reactor coolant system of pressurized water reactors. However, the thermal embrittlement of CASS resulting from long-term operation causes structural safety problems. Ultrasonic testing for flaw detection has been used to assess the thermal embrittlement of CASS; however, the high scattering and attenuation of the ultrasonic wave propagating through CASS make it difficult to accurately quantify the flaw size. In this paper, we present a different approach for evaluating the thermal embrittlement of CASS by assessing changes in the material properties of CASS using a nonlinear ultrasonic technique, which is a potential nondestructive method. For the evaluation, we prepared CF8M specimens that were thermally aged under four different heating conditions. Nonlinear ultrasonic measurements were performed using a contact piezoelectric method to obtain the relative ultrasonic nonlinearity parameter, and a mini-sized tensile test was performed to investigate the correlation of the parameter with material properties. Experimental results showed that the ultrasonic nonlinearity parameter had a correlation with tensile properties such as the tensile strength and elongation. Consequently, we could confirm the applicability of the nonlinear ultrasonic technique to the evaluation of the thermal embrittlement of CASS.

• 천문학회지
• /
• 제42권6호
• /
• pp.161-174
• /
• 2009

Observation of standard stars is of crucial importance in stellar photometry. We have studied the standard transformation relations of the UBV RI CCD photometric system at the Maidanak Astronomical Observatory in Uzbekistan. All observations were made with the AZT-22 1.5m telescope, SITe 2k CCD or Fairchild 486 CCD, and standard Bessell UBV RI filters from 2003 August to 2007 September. We observed many standard stars around the celestial equator observed by SAAO astronomers. The atmospheric extinction coefficients, photometric zero points, and time variation of photometric zero points of each night were determined. Secondary extinction coefficients and photometric zero points were very stable, while primary extinction coefficients showed a distinct seasonal variation. We also determined the transformation coefficients for each filter. For B, V, R, and I filters, the transformation to the SAAO standard system could be achieved with a straight line or a combination of two straight lines. However, in the case of the U filter and Fairchild 486 CCD combination, a significant non-linear correction term - related to the size of Balmer jump or the strength of the Balmer lines - of up to 0:08 mags was required. We found that our data matched well the SAAO photometry in V, B - V, V - I, and R - I. But in U - B, the difference in zero point was about 3.6 mmag and the scatter was about 0.02 mag. We attribute the relatively large scatter in U -B to the larger error in U of the SAAO photometry. We confirm the mostly small differences between the SAAO standard UBV RI system and the Landolt standard system. We also attempted to interpret the seasonal variation of the atmospheric extinction coefficients in the context of scattering sources in the earth's atmosphere.

• 대한기계학회논문집A
• /
• 제41권5호
• /
• pp.427-433
• /
• 2017

고강도 재료나 열전도성이 낮은 재료의 밀링 가공시 가공 부위에서 발생하는 높은 마찰열로 인해 공구 파손 등이 심각하게 발생할 수 있으므로 절삭유 공급이 매우 중요하다. 기존의 절삭유 공급 방식은 수동식 관절 구조를 활용한 방법으로 과도한 양을 분사함에도 불구하고 효과적인 결과를 얻기 힘들었다. 또한, 작업 중 비산으로 인해 작업장 환경에도 큰 악영향을 미쳤다. 이에 본 연구에서는 자동으로 분사 위치 조절이 가능한 장치에 기반하여 절삭유 분사위치에 따른 STS316L 의 밀링가공 특성을 분석하였다. 그 결과, 절삭유 공급 위치 변화에 따라 공구 마모와 표면 거칠기 변화가 관찰되었으며 이를 통해 제작된 장치의 효용성을 보였다.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2006년도 PAN PACIFIC CONFERENCE vol.1
• /
• pp.111-116
• /
• 2006

The microstickes control effects of some fixing agents, including an inorganic PAC, an organic polyamine (PA) and polydiallydimethyl ammonium chloride (Pdadmac), and a high cationic starch (HCS), were investigated, together with their effects on wet end performances and physical properties of handsheets. Despite that the HCS and Pdadmac had lower cationic charge densities than the PA and PAC (the HCS being even lower), they gave higher zeta potentials to fibers, and lower turbidities, cationic demands and residual COD contents to the pulp liquid phases than the PA and PAC did. In all cases, the HCS showed even better effects than the Pdadmac. In addition, drainage speed was also much higher by the HCS treatments although paper formation was worsened. All the phenomena showed that the HCS can fix more dissolved and colloidal substances to cellulose fibers, indicating that the HCS functioned mainly with flocculation and even hydrogen bonding mechanisms. Data on optical properties further indicated that the HCS interacted preferentially with colloidal substances, since it fixed more 'dirty' microstickes to fibers which decreased more sheet brightness while increasing more sheet opacity (with both higher light absorption and scattering coefficients). Interestingly, the organic fixing agents did not decrease tensile, tearing, and folding strengths of paper sheets made from 100% recycled newsprint pulp, except when they were dosed in high amounts. On the contrary, the inorganic PAC had more serious negative effects on the strength properties, especially on folding endurance. The study suggested that proper use of the HCS can lead to better microstickies control effects than traditional agents and methods.

• 수산해양기술연구
• /
• 제52권2호
• /
• pp.111-120
• /
• 2016

Acoustic surveys using a scientific echosounder and trawl surveys were concurrently carried out in between Geoje and Tongyeong of the South Sea by season. The anchovy schools were identified by trawling in each station and used for frequency response analysis. Frequency responses of anchovy schools by season and species composition ratio were examined using multi-frequencies (18, 38, 70, 120 and 200 kHz). The frequency response r(f), is one of the acoustic characteristics which means the volume back-scattering strength ratio between a reference frequency and other frequencies. In spring, the r(f) of anchovy schools decreased with increased frequency, with the exception of 120kHz. While, in winter, the r(f) continuously decreased inversely proportional to the increase in frequency. Frequency response of anchovy schools presented a distinctive difference between spring and winter, however it did not different in spife of different species composition ratios in schools.

• 한국전자파학회논문지
• /
• 제17권12호
• /
• pp.1212-1223
• /
• 2006

마이크로웨이브 대역은 무선 서비스의 수요가 많은 대역이지만 주로 장거리 고정 통신용으로 이용되어 전파 모델에 대한 연구가 VHF/UHF 대역보다 적게 이루어졌으나, 최근 마이크로웨이브 대역을 이용한 이동 통신 서비스가 증가됨에 따라 보다 정확성 있는 전파 예측 모델의 개발이 요구되어 왔다. 이동 전파 환경에서 신뢰성있는 전파 예측 모델을 개발하기 위해서는 다양한 전파 환경에서 신호의 반사, 회절 및 산란에 따른 전파 특성에 대한 측정 및 분석이 필요하다. 제시된 8 GHz 대역용 전파 예측 모델은 가시거리 영역과 비가시거리 영역에 맞는 모델을 구분하여 개발된다. 가시거리 영역용 예측 모델은 직접파, 지면 반사파 및 도로 양쪽 건물 반사파에 의한 해석적 결과에 측정된 경로 손실 지수를 적용하여 신호 세기를 예측하고, 비가시거리 영역용 예측 모델은 회절 후 신호 변화 현상에 대한 분석 결과를 이용하여 수신 전력을 예측한다.