• Korean Journal of Optics and Photonics
• /
• v.7 no.1
• /
• pp.60-65
• /
• 1996

Degradation of the optical communication system due to the stimulated Brillouin scattering effect in the optical fiber is measured, and its suppression is demonstrated. In the externally modulated 2.5 Gb/s transmission experiment, bit error rate is increased due to the stimulated Brillouin scattering effect when the signal power (linewidth 3 MHz) incident into the dispersion shifted fiber is larger than 10 dBm. SBS effect is suppressed completely, up to 15 dBm of transmission power, by broadening the source linewidth to 200 MHz.

• Journal of the Korean Applied Science and Technology
• /
• v.27 no.4
• /
• pp.470-474
• /
• 2010

Various anti-scattering agents for suppression of dust scattering at waste depository were compared in this study. Based on the price, easy of usage, and no toxicity, 1% of $Al_2(SO_4)_3$ was selected as surface hardening agents. Only lower than 2% of total weight were flied when wind speed was monthly maximum velocity during 1 hr. These results were quite good with comparison of S anti-scattering agents which was made by C company in Korea. When $Al_2(SO_4)_3$ was spread, the surface waste became hard therefore the effect of suppression of scattering dust was long lasting. It was recommend that 2% of $Al_2(SO_4)_3$ was spread to keep suppression of scattering dust when sudden gust of wind such as natural disaster was occurred.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2000.11a
• /
• pp.726-730
• /
• 2000

In this article, the scattering effect around a microphone is studied by using boundary element method, because it is hard to find the scattering experimentally. The scattering problem is defined by impinging an obstacle, i.e. a solid cylinder, with an incident plane wave. From this analysis, the scattering is numerically calculated by varying the microphone shape, the incident angle and the distance between microphones. It is found that the scattering effect of a microphone increases as the frequency increases and is not considerable in the low frequency region. However, it is noted that there might be the pressure distortion above 4 kHz due to the scattering in microphone measurement.

• Nuclear Engineering and Technology
• /
• v.48 no.2
• /
• pp.339-350
• /
• 2016

Based on the resonance integral (RI) tables produced by the NJOY program, the conventional subgroup method usually ignores both the resonance elastic scattering and the resonance interference effects. In this paper, on one hand, to correct the resonance elastic scattering effect, RI tables are regenerated by using the Monte Carlo code, OpenMC, which employs the Doppler broadening rejection correction method for the resonance elastic scattering. On the other hand, a fast resonance interference factor method is proposed to efficiently handle the resonance interference effect. Encouraging conclusions have been indicated by the numerical results. (1) For a hot full power pressurized water reactor fuel pin-cell, an error of about +200 percent mille could be introduced by neglecting the resonance elastic scattering effect. By contrast, the approach employed in this paper can eliminate the error. (2) The fast resonance interference factor method possesses higher precision and higher efficiency than the conventional Bondarenko iteration method. Correspondingly, if the fast resonance interference factor method proposed in this paper is employed, the $k_{inf}$ can be improved by ~100 percent mille with a speedup of about 4.56.

• Advances in nano research
• /
• v.1 no.2
• /
• pp.111-124
• /
• 2013

Surface-enhanced Raman scattering (SERS) effect deals with the enhancement of the Raman scattering intensity by molecules in the presence of a nanostructured metallic surface. The first observation of surface-enhanced Raman spectra was in 1974, when Fleischmann and his group at the University of Southampton, reported the first high-quality Raman spectra of monolayer-adsorbed pyridine on an electrochemically roughened Ag electrode surface. Over the last thirty years, it has developed into a versatile spectroscopic and analytical technique due to the rapid and explosive progress of nanoscience and nanotechnology. This review article describes the recent development in field of surface-enhanced Raman scattering research, especially fabrication of various SERS active substrates, mechanism of SERS effect and its various applications in both surface sciences and analytical sciences.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.10 no.3
• /
• pp.16-24
• /
• 2007

The high-frequency analysis method of back-scattering cross section spectrum of rotating targets is established. The time history of the back-scattering cross section is calculated using a quasi-stationary approach, based on a physical optics and a physical theory of diffraction, combining an adaptive triangular beam method to consider the shadow effect. And the spectra of back-scattering cross section by the Doppler effect are analyzed applying a simple fast Fourier transform method to its time history. The numerical calculation for rotating targets, such as rotating metal plates and underwater propeller, are carried out. The time history appears to be periodic with respect to the number of wings. The backscattering cross section spectrum level and its frequency shift are dependent on the rotating speed, direction, and the shape of the targets.

• Journal of Korea Multimedia Society
• /
• v.14 no.12
• /
• pp.1528-1535
• /
• 2011

We present a fog generation algorithm in 2D images. The proposed algorithm provides a scattering model for the approximated calculation of fog density. The scattering model needs parameters of distance and altitude information. However, 2D images do not include that information, so that we calculate them from the depth information generated in an interactive manner, and estimate the scattering factor by using the scattering model. Then we generate fog effect on an input image using the scattering factor by distance-oriented selection blur and color blending. With the algorithm, we can easily create the fog-effected images and fog generated animation from 2D images.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.17 no.4
• /
• pp.521-530
• /
• 2014

In this paper, the glint effect of maritime target to a radar system was analyzed by simulation and field test with a barge and corner reflectors. From the experiment, we proposed a glint measurement method of a real maritime target and it was indicated that the glint effect between the simulation results and real measurement is similar. Also it was founded that the glint effect is related to the relative amount of RCS(Radar Cross Section) difference among major scattering point and minor scattering points. Finally, the experiment showed the glint effects of the rotating barge with some different combinations of scattering points.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.5
• /
• pp.952-964
• /
• 1992

The interaction of natural convection and radiation heat transfer in a two dimensional square enclosure containing absorbing, emitting and linear anisotropically scattering gray medium is numerically analyzed. P-1 and P-3 approximation is introduced to calculate radiation heat transfer. The effects of scattering albedo, wall emissivity, scattering anisotropy, and optical thickness on the characteristics of the flow and temperature field and heat transfer are investigated. Temperature and velocity profiles depend a great deal on the scattering albedo, and the importance of this effect increases with decrease in albelo. Planck number is another important parameter in radiation heat transfer. The increase in scattering albedo increases convection heat transfer and decreases radiation heat transfer at hot wall. However, the increase in scattering albedo decreases both convection and radiation heat transfer at cold wall. The increase in optical thickness decreases radiation heat transfer. The scattering anisotropy has important effects on the radiation heat transfer only. The highly forward scattering leads to an increase of radiation heat transfer whereas the highly backward scattering leads to an decrease of radiation heat transfer. The effect of scattering anisotropy decreases when reducing the wall emissivity.

• 한국신재생에너지학회:학술대회논문집
• /
• 2008.10a
• /
• pp.128-130
• /
• 2008

One of methods to increase the efficiency of a dye-sensitized solar cell(DSC) is the effective usage of the incident light. It can be controlled by using a light scattering layer. The light scattering effect makes that the optical path length of incident light to DSC increases. And then, the photocurrent and the efficiency is increased because of the increase of dye adsorption and the abundant amount of the light. In this study, we apply the light scattering layer to DSC by using two $TiO_2$ pastes that have different particle sizes. As a result, the photocurrent increases and the total efficiency is also increases in the case of using large-sized $TiO_2$ particle as the light scattering layer.