• Journal of the Korea Institute of Military Science and Technology
• /
• v.10 no.3
• /
• pp.16-24
• /
• 2007

The high-frequency analysis method of back-scattering cross section spectrum of rotating targets is established. The time history of the back-scattering cross section is calculated using a quasi-stationary approach, based on a physical optics and a physical theory of diffraction, combining an adaptive triangular beam method to consider the shadow effect. And the spectra of back-scattering cross section by the Doppler effect are analyzed applying a simple fast Fourier transform method to its time history. The numerical calculation for rotating targets, such as rotating metal plates and underwater propeller, are carried out. The time history appears to be periodic with respect to the number of wings. The backscattering cross section spectrum level and its frequency shift are dependent on the rotating speed, direction, and the shape of the targets.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.14 no.3
• /
• pp.1-5
• /
• 1977

The scattering of a electromagnetic wave by a perfectly conducting circular cylinder with a sheath immersed in a compressible plasma is treated. The total scattering cross section and the back scattering cross section are obtained for the case of the incident electromagnetic wave. Numerical results are calculated by computer and presented in graphs together with discussions.

• Journal of the Society of Naval Architects of Korea
• /
• v.42 no.4 s.142
• /
• pp.421-426
• /
• 2005

Scattering center extraction schemes for radar cross section reduction of large complex targets, like warships, was developed, which are an 1-D radar image method(range profile), and a direct analysis based on an object precision method. The analysis result of partial dihedral model shows that the presented direct analysis method is more efficient than the 1-D radar image method for scattering center extraction of interested targets, in terms of radar cross section reduction design, not signal processing. In order to verify the accuracy of the direct analysis method, a scattering center analysis of an naval weapon system was carried out, and the result was coincident with that of another well-known RCS analysis program. Finally, an analysis result of RCS and its scattering center of an 120m class warship-like model presented that the direct analysis method can be an efficient and powerful tools for radar cross section reduction of large complex targets.

• Nuclear Engineering and Technology
• /
• v.52 no.12
• /
• pp.2733-2742
• /
• 2020

This paper presents an assessment of applicability of the multigroup cross sections generated with Monte Carlo tools to the fast reactor analysis based on transport calculations. 33-group cross section sets were generated for simple one- (1-D) and two-dimensional (2-D) sodium-cooled fast reactor problems using the SERPENT code and applied to deterministic steady-state and depletion calculations. Relative to the reference continuous-energy SERPENT results, with the transport corrected P₀ scattering cross section, the k-eff value was overestimated by 506 and 588 pcm for 1-D and 2-D problems, respectively, since anisotropic scattering is important in fast reactors. When the scattering order was increased to P₅, the 1-D and 2-D problem errors were increased to 577 and 643 pcm, respectively. A sensitivity and uncertainty analysis with the PERSENT code indicated that these large k-eff errors cannot be attributed to the statistical uncertainties of cross sections and they are likely due to the approximate anisotropic scattering matrices determined by scalar flux weighting. The anisotropic scattering cross sections were alternatively generated using the MC²-3 code and merged with the SERPENT cross sections. The mixed cross section set consistently reduced the errors in k-eff, assembly powers, and nuclide densities. For example, in the 2-D calculation with P3 scattering order, the k-eff error was reduced from 634 pcm to -223 pcm. The maximum error in assembly power was reduced from 2.8% to 0.8% and the RMS error was reduced from 1.4% to 0.4%. The maximum error in the nuclide densities at the end of 12-month depletion that occurred in ²³⁷Np was reduced from 3.4% to 1.5%. The errors of the other nuclides are also reduced consistently, for example, from 1.1% to 0.1% for ²³⁵U, from 2.2% to 0.7% for ²³⁸Pu, and from 1.6% to 0.2% for ²⁴¹Pu. These results indicate that the scalar flux weighted anisotropic scattering cross sections of SERPENT may not be adequate for application to fast reactors where anisotropic scattering is important.

• The Journal of the Acoustical Society of Korea
• /
• v.36 no.1
• /
• pp.12-22
• /
• 2017

It is important to predict accurately reverberation level, which is a limiting factor in underwater target detection. Recently, the studies have been expanded from monostatic sonar to bistatic sonar in which source and receivers are separated. To simulate the bistatic reverberation level, the computation processes for propagation, scattering strength, and scattering cross section are different from those in monostatic case and more complex computation processes are required. Although there have been many researches for bistatic reverberation, few studies have assessed the bistatic scattering cross section which is a key factor in simulate reverberation level. In this paper, a new method to estimate the bistatic scattering cross section is suggested, which uses the area of intersection between two circles. Finally, the reverberation levels simulated with the scattering cross section estimated using the method suggested in this paper are compared with those estimated using the methods previously suggested and those measured from an acoustic measurements conducted in May 2013.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.24 no.6
• /
• pp.119-128
• /
• 2020

An ultrasonic multiple scattering simulation using cross-section of fine dust particles were proposed. These days, along with awareness of air pollution, social interest in fine dust is increasing. In the construction field, awareness of fine dust is increasing, and research on preparing various countermeasures is underway. The light scattering method fine dust meter currently in use is affected by environmental factors such as relative humidity, and reliability problems in terms of accuracy are continuously reported. However, the transmission of ultrasonic waves can directly reflect the physical change of the medium based on the mechanical wave. Using these advantages of ultrasonic waves, fine dust measurement simulation was performed using the scattering cross section and ultrasonic multiple scattering theory. The shape data of the fine dust particles were collected using a SEM (Scanning Electron Microscope), and a cross-section according to the fine dust particles was derived through numerical analysis. As a result of signal processing, the error for the number density corresponding to each cross-section is minimum 19, maximum 3455.

• Publications of The Korean Astronomical Society
• /
• v.22 no.1
• /
• pp.21-33
• /
• 2007

Ever since the identification of 6830 and 7088 features as the Raman scattered O VI 1032, 1038 resonance doublets in symbiotic stars by Schmid (1989), Raman scattering by atomic hydrogen has been a very unique tool to investigate the mass transfer processes in symbiotic stars. Discovery of Raman scattered He II in young planetary nebulae (NGC 7027, NGC 6302, IC 5117) allow one to expect that Raman scattering can be an extremely useful tool to look into the mass loss processes in these objects. Because hydrogen is a single electron atom, their wavefunctions are known in closed form, so that exact calculations of cross sections are feasible. In this paper, I review some basic properties of Raman scattered features and present detailed and explicit matrix elements for computation of the scattering cross section of radiation with atomic hydrogen. Some astrophysical objects for which Raman scattering may be observationally pertinent are briefly mentioned.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1998.06e
• /
• pp.247-250
• /
• 1998

The scattering of plane ultrasonic waves by the nuclear fuel pin of liquid metal reactor in sodium is studied. According to the internal composition in the cladding tube, the fuel pin has three cross sections, i.e. helium gas plenum, sodium-filled section, and fuel insertion section. The scattering spectra for each section of the fuel pin are different. The circumnavigating ultrasonic waves of each section are analyzed by the resonance scattering method. The whispering gallery wave modes are generated in the sodium-filled plenum section and the fuel rod insertion section with a sodium-gap. The circumferential wave modes are propagated in the cladding tube of the helium gas plenum section. The annular gap between the cladding tube and metal uranium pellet rod affects the scattering spectra. The different propagation characteristics can be utilized for the nondestructive method of detecting the unbonded area and measuring the level of the sodium-filled section of the fuel pin.

• Proceedings of the KIEE Conference
• /
• 1987.07a
• /
• pp.78-81
• /
• 1987

The scattering characteristics are analysed for the dielectric cylinder with arbitrary cross section partially covered by thin conductors. The integro differential equations consistant with boundary conditions of conductor and dielectric boundaries are derived by the equivalence principle. They are transformed into matrix equations by moment method. The circular dielectric cylinder covered by conductors at the upper and bottom side of the cylinder is chosen for the numerical example. Current distributions on conductors and scattering cross section by the cylinder are computed for incident wave perpendicular to the conductor plane.

• Nuclear Engineering and Technology
• /
• v.31 no.6
• /
• pp.631-637
• /
• 1999

The module LEAPR of NJOY data processing system has been improved to have the capability of computing the thermal elastic scattering cross sections for silicon, which has a diamond-like structure. Silicon lattice was assumed as an fcc lattice with two atoms at each lattice point. The calculation formulas for thermal neutron elastic scattering by silicon were introduced and incorporated into LEAPR, and then the scattering cross sections for silicon were computed. The results were compared with experimental data, and they were found to give a good agreement with experimental data.