• 한국항공우주학회지
• /
• 제42권11호
• /
• pp.958-967
• /
• 2014

효율적인 RCS 감소 연구를 위해 고주파수 근사 기법을 연계한 혼합기법 기반의 RCS 예측 코드를 개발하였다. 연계기법으로 전자기파 산란에 관한 고주파 기법인 물리광학법(Physical Optics)과 기하광학법(Geometrical Optics)을 이용하였다. RCS 산란 메커니즘의 하나인 Cavity Return 효과를 확인하기 위해 Inlet 영역은 기하광학법을 적용하였고, 그 외 영역은 물리광학법을 적용하였다. 예측코드의 정확성을 검증하기 위하여 구의 이론해와 예측결과를 비교하였고, Cavity가 존재하는 Sphere에 대한 Full Wave 해석해와 결과값을 비교하였다. 마지막으로 비행체 형상에 대한 RCS 해석문제에 적용하여 개발 코드의 유용성을 확인하였다.

• 한국인터넷방송통신학회논문지
• /
• 제12권6호
• /
• pp.215-221
• /
• 2012

데이터센터 네트워크에서의 병목현상 문제를 해결하기 위해 경로의 다양성을 제공하는 네트워크 구조들이 제안되고 있다. 이렇게 제공되는 다중 경로들을 활용함에 있어 TCP의 성능에 미치는 영향을 고려해야 하는데 이는 같은 플로우 내의 패킷들이 다중 경로를 통해 전송될 경우 패킷 순서 바뀜으로 인해 TCP성능이 저하될 수 있기 때문이다. 지금까지 제안된 대부분의 방식들은 패킷의 순서 바뀜을 막기 위해 사용가능한 경로들 중 하나를 선택하여 플로우를 할당함으로써 부하를 분산한다. 본 연구에서는 경로의 다양성을 제공하는 대표적인 토포로지인 Fat-Tree에서 패킷 단위의 분산방식으로 다중 경로를 이용할 때 패킷 순서 바뀜이 TCP성능에 큰 영향을 미칠 만큼 심하지 않음을 주장한다. 다양한 패턴의 트래픽을 이용한 모의실험 결과는 Fat-Tree와 같은 토포로지에서 큰 비용을 들이지 않고 TCP의 성능문제를 해결할 가능성을 암시한다.

• 한국전자파학회논문지
• /
• 제24권6호
• /
• pp.586-594
• /
• 2013

본 논문에서는 도파관 슬롯 배열 안테나 설계 시 분기 도파관 내에서 결합 슬롯과 복사 슬롯 간의 원하지 않는 고차 모드 결합을 줄일 수 있는 슬롯 커플러용 결합 요소를 제안하였다. 제안된 소자는 수직 교차하는 두 도파관이 공유하는 도파관 광벽에 위치한 중심 종방향 션트-시리즈 결합 슬롯과 이를 여기시키는 비대칭 복합아이리스로 구성된다. 먼저 HFSS를 사용하여 커플러 구조의 산란 계수를 구하고, 결합 슬롯의 T - 회로망 등가 회로의 파라미터를 추출하였다. 또한, 소자의 구조적인 치수를 변화시키면서 공진 길이 및 정규화 어드미턴스와같은 공진 특성을 분석하였다. 결합 슬롯으로부터 ${\lambda}_g/4$ 떨어진 단락 블록을 갖는 커플러를 설계 제작하여 측정한 실험 결과는 모의실험 결과와 잘 일치하였다.

• 대기
• /
• 제23권3호
• /
• pp.321-329
• /
• 2013

This study examines the effect of aerosols on the vertical invigoration of continental stratiform clouds, using a dataset of Atmospheric Radiation Measurement (ARM) Intensive Operational Period (IOP, March 2000) at the Southern Great Plains (SGP) site. To provide further support to our observation-based findings, the weather research and forecasting (WRF) sensitivity simulations with changing cloud condensation nuclei (CCN) concentrations have been carried out for the golden episode over SGP. First, cross correlation between observed aerosol scattering coefficient and cloud liquid water path (LWP) with a 160-minutes lag is the highest of r = 0.83 for the selected episode, which may be attributable to cloud vertical invigoration induced by an increase in aerosol loading. Modeled cloud fractions in a control run are well matched with the observation in the perspective of cloud morphology and lasting period. It is also found through a simple sensitivity with a change in CCN that aerosol invigoration (AIV) effect on stratiform cloud organization is attributable to a change in the cloud microphysics as well as dynamics such as the corresponding modification of cloud number concentrations, drop size, and latent heating rate, etc. This study suggests a possible cloud vertical invigoration even in the continental stratiform clouds due to aerosol enhancement in spite of a limited analysis based on a few observed continental cloud cases.

• 한국재료학회지
• /
• 제13권10호
• /
• pp.683-690
• /
• 2003

The high strength low alloy(HSLA) steels microalloyed with Nb, Ti and V have been widely used as the automobile parts to decrease weight of vehicles. The effects of process conditions are investigated in the aspects of the precipitation behavior and the mechanical properties of HSLA steel microalloyed with Nb and Ti using TEM, SANS and mechanical testing. When Ti was added to a 0.07C-1.7Mn steel which was coiled at $500^{\circ}C$, the specimen revealed the property of higher tensile strength of 853.1 MPa and the stretch-flangeability of 60%. The stretch-flangeability was increased up to 97.8% for coiling temperature above $700^{\circ}C$. The precipitation hardening cannot be achieved in the 0.045C-1.65Mn steel which was the lower density of fine precipitates. However, the 0.07C-1.7Mn steels containing Nb and/or Ti which was coiled at X$/^{\circ}C$ have a high precipitates density of $2${\times}$10^{ 5}$/$\mu$㎥. The high strength of these steels was attributed to the precipitation hardening caused by a large volume froction of (Ti, Nb)C precipitates with a size below 5 nm in ferrite matrix.

• 대한조선학회논문집
• /
• 제56권5호
• /
• pp.383-388
• /
• 2019

It is essential to reduce the Infra-red signature for increasing ship's survivability in ship design stage. However the ship's IR signature is quite sensitive to the maritime and atmosphere. Therefore, it is very important to select the marine meteorological data to be applied to the signature analysis. In this study, we selected the three meteorological sample sets from the population of the Korea Meteorological Administration's marine environment data in 2017. These samples were selected through the two-dimensional stratified sampling method, taking into account the geopolitical threats of the Korean peninsula and the effective area of the buoy. These sample sets were applied to three naval ships classified by their tonnage, and then the IR signature analysis was performed to derive the Contrast Radiant Intensity (CRI) values. Based on the CRI values, the validity of each sample set was determined by comparing Cumulative Distribution Function (CDF), and Probability Density Function (PDF). Also, we checked the degree of scattering in each sample set and determined the efficiency of analysis time and cost according to marine meteorological sample sets to confirm the possibility of a probabilistic method. Through this process, we selected the standard for optimization of marine meteorological sample for ship IR signature analysis. Based on this optimization sample, by applying probabilistic method to the management of IR signature for naval ships, the robust design is possible.

• 한국재료학회지
• /
• 제22권11호
• /
• pp.636-641
• /
• 2012

In this study, we have investigated highly efficient nanoscale surface corrugated light emitting diodes (LEDs) for the enhancement of light extraction efficiency (LEE) of nitride semiconductor LEDs. Nanoscale indium tin oxide (ITO) surface corrugations are fabricated by using the conformal nanoimprint technique; it was possible to observe an enhancement of LEE for the ITO surface corrugated LEDs. By incorporating this novel method, we determined that the total output power of the surface corrugated LEDs were enhanced by 45.6% for patterned sapphire substrate LEDs and by 41.9% for flat c-plane substrate LEDs. The enhancement of LEE through nanoscale surface corrugations was studied using 3-dimensional Finite Different Time Domain (FDTD) calculation. From the FDTD calculations, we were able to separate the light extraction from the top and bottom sides of device. This process revealed that light extraction from the top and bottom sides of a device strongly depends on the substrate and the surface corrugation. We found that enhanced LEE could be understood through the mechanism of enhanced light transmission due to refractive index matching and the increase of light scattering from the corrugated surface. LEE calculations for the encapsulated LEDs devices also revealed that low LEE enhancement is expected after encapsulation due to the reduction of the refractive index contrast.

• Macromolecular Research
• /
• 제17권2호
• /
• pp.99-103
• /
• 2009

We evaluated the efficacy of pH-sensitive micelles, formed by methoxy poly(ethylene glycol)-b-poly($\beta$)-amino ester) (PEG-PAE), as carriers for paclitaxel (PIX), a drug currently used to treat various cancers. PTX was successful encapsulated by a film hydration method. Micelles encapsulated more than 70% of the PTX and the size of the PTX-encapsulated micelles (PTX-PM) was less than 150 nm. In vitro experiments indicated that the micelles were unstable below pH 6.5. After encapsulation of PTX within the micelles, dynamic light scattering (DLS) studies indicated that low pH had a similar demicellization effect. An in vitro release study indicated that PTX was slowly released at pH 7.4 (normal body conditions) but rapidly released under weakly acidic conditions (pH 6.0). We demonstrated the safety of micelles from in vitro cytotoxicity tests on HeLa cells and the in vivo anti-tumor activity of PTX-PM in B16F 10 tumor-bearing mice. We concluded that these pH-sensitive micelles have potential as carriers for anti-cancer drugs.

• 한국전기전자재료학회논문지
• /
• 제28권12호
• /
• pp.852-856
• /
• 2015

In this study, we investigate the effect of high-energy ball milling on thermoelectric transport properties in double-filled $CoSb_3$ skutterudite ($In_{0.2}Yb_{0.1}Co_4Sb_{12}$). $In_{0.2}Yb_{0.1}Co_4Sb_{12}$ powders are milled using high-energy ball milling for different periods of time (0, 5, 10, and 20 min), and the milled powders are consolidated into bulk samples by spark plasma sintering. Microstructure analysis shows that the high-energy ball milled bulk samples are composed of nano- and micro-grains. Because the filling fractions are reduced in the bulk samples due to the kinetic energy of the high-energy ball milling, the carrier concentration of the bulk samples decreases with the ball milling time. Furthermore, the mobility of the bulk samples also decreases with the ball milling time due to enhanced grain boundary scattering of electrons. Reduction of electrical conductivity by ball milling has a decisive effect on thermoelectric transport in the bulk samples, power factor decreases with the ball milling time.

• 천문학회지
• /
• 제50권5호
• /
• pp.139-149
• /
• 2017

The Korea Astronomy and Space Science Institute plans to develop a coronagraph in collaboration with National Aeronautics and Space Administration (NASA) and to install it on the International Space Station (ISS). The coronagraph is an externally occulted one-stage coronagraph with a field of view from 3 to 15 solar radii. The observation wavelength is approximately 400 nm, where strong Fraunhofer absorption lines from the photosphere experience thermal broadening and Doppler shift through scattering by coronal electrons. Photometric filter observations around this band enable the estimation of 2D electron temperature and electron velocity distribution in the corona. Together with a high time cadence (<12 min) of corona images used to determine the geometric and kinematic parameters of coronal mass ejections, the coronagraph will yield the spatial distribution of electron density by measuring the polarized brightness. For the purpose of technical demonstration, we intend to observe the total solar eclipse in August 2017 with the filter system and to perform a stratospheric balloon experiment in 2019 with the engineering model of the coronagraph. The coronagraph is planned to be installed on the ISS in 2021 for addressing a number of questions (e.g., coronal heating and solar wind acceleration) that are both fundamental and practically important in the physics of the solar corona and of the heliosphere.