• Journal of the Semiconductor & Display Technology
• /
• v.19 no.1
• /
• pp.79-84
• /
• 2020

Unlike a printing process, it is difficult to pattern organic thin films in the longitudinal (coating) direction using a coating process. In this paper, we have investigated the feasibility of patterning organic thin films using needles. To this end, we have slot-coated an aqueous poly(3,4-ethylenedioxythiophene):poly(4-styrenesulfonate) (PEDOT:PSS) solution in the form of a fine stripe or large area and then applied the dual needle; one for discharging the main solvent of the underlying thin film and the other for sucking the dissolved thin film. We have found that the pattern width and depth increase as the moving speed of the plate decreases. However, it is observed that the sidewall slope is very gentle (the length of the slope is of the order of 200 ㎛) due to the fact that the discharged main solvent is widely spread and then isotropic etching occurs. With this scheme, we have also demonstrated that a fine stripe can be obtained by scanning the dual needle closely. To demonstrate its applicability to solution-processable organic light-emitting diodes (OLEDs), we have also fabricated OLED with the patterned PEDOT:PSS stripe and observed the insulation property in the strong light-emitting stripe.

• Journal of the Korean Wood Science and Technology
• /
• v.15 no.2
• /
• pp.79-89
• /
• 1987

This study was executed to examine helical structure and other feature, of Taxus cuspidata S. et Z. and Larix gmelinii var. principis-ruprechtii Pilger through photomicroscopic and scanning electron microscopic observation, and the obtained result, were summarized as follows: 1. Tracheid transition from springwood to summerwood was abrupt, mel slightly gradual in Taxus cuspidata S. et Z. and summerwood width of Larix gmelinii var. principis-ruprechtii Pilger was wider than that of Taxus cuspidata S. et Z. 2. Normal vertical and horizontal resin canals and surrounding thick epithelial cells were present in Larix gmelinii var. principis-ruprechtii Pilger but not present in Taxus cuspidata S. et Z. 3. Instead of helical thickening, helical chicks were observed only in summerwood trachieds of Larix gmelinii var. principis-ruprechtii Pilger. However, helical thickenings forming S, Z., and horizontal helix perpendicular to long axis of tracheid were observed in springood and summerwood tracheids of Taxus cuspidata S. et Z. and these helical thickenings were considered as analogous to the innermost layer of secondary wall. 4. Uniseriate and fusiform rays were appeared on tangential surface of Larix gmelinii var. principis-ruprechtii Pilger but oly uniserate ray was observed on tangential surface ot Taxus cuspidata S. et Z. The fusiform rays of Larix gmelinii var. principis-ruprechtii Pilger usually contained one horizontal resin canal bot occasionally two horizontal resin canals were contained in a fusiform ray. 5. Trabeculae and crassulae were observed in the tracheids of Larix gmelimii var. principis-ruprechtii Pilger but not observed in the tracheids of Taxus cuspidata S. et Z.

• Journal of the Mineralogical Society of Korea
• /
• v.21 no.4
• /
• pp.365-372
• /
• 2008

Because stellerite, belonging to the zeolite group, is much less common mineral than any other minerals in Korea, little mineralogical study has been done so far. Stellerite occurs on open surfaces of fractured zones in the Yucheon Granite associated with flowery tourmaline, Chongdo, Gyeongsangbuk-do. Stellerite with $3{\sim}4\;mm$ length and $1{\sim}2\;mm$ width is characterized by an equigranular and euhedral form. Flat and elongated columnar crystals show well developed (010) face. Stellerite shows an intensive alteration process, possibly due to weathering or devitrification, as evidenced by microtextural analysis of Scanning Electron Microscope (SEM). Water loss occurs at $161^{\circ}C$ while dehydroxylation occurs at $467^{\circ}C$ causing decomposition of the structure afterward. From its textural observation, it is concluded that stellerite formed rapidly at small undercooling, precipitated from residual melt during the late stage with relatively constant chemistry.

• Journal of Periodontal and Implant Science
• /
• v.39 no.4
• /
• pp.385-390
• /
• 2009

Purpose: In this study we evaluated the morphologic aspects of defects created by a piezoelectric ultrasonic scaler with scaler tip on casting gold alloy using scanning electron microscope (SEM) images and defect surface profiles. Methods: 54 blocks of type III casting gold alloy (Firmilay, Jellenko Inc, CA, USA) were scaled by a piezoelectric ultrasonic scaler (P-MAX, Satelec, France) with scaler tip (No. 1 tip) on a sledge device. 2-dimensional profiles of defects on all samples were investigated by a surface profilometer (a-Step 500, KLA-Tencor, CA, USA). The selected working parameters were lateral force (0.5 N, 1.0 N, 2.0 N), mode (P mode, S mode), and power setting (2, 4, 8). SEM images were obtained. Defect surface profiles were made on Microsoft Excel program using data obtained by a surface profilometer. Results: Among P mode samples, there were similarities on defect surface profiles and SEM images regardless of lateral force. The defects created in P mode were narrow and shallow although the depth and the width increased as power setting changed low (2) to high (8). In P mode samples, the defect depth was the greatest when lateral force of 0.5 N was applied. However all the depths were smaller than 1 m. SEM images of Lateral force of 0.5 N, S mode, power setting 2 and 4 were similar to that of P mode, but the other SEM images of S mode showed discernible changes. Defect depth of S mode samples was the greatest when lateral force of 1.0 N was applied. Conclusions: Within the limitations of this study, it can be concoluded that removing capability of piezoelectric scaler with scaler tip becomes maximized as power level becomes higher but the capability is restricted when excessive lateral force is applied on scaler tip.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.20 no.1
• /
• pp.41-49
• /
• 1990

The author observed the changes of vasculature of pre-and post-irradiation on DMBA induced rat tongue cancer. The study was performed by using vascular corrosion resin casting, and scanning electron microscopy. The results were as follows. 1. The capillaries runned parallely and formed bundles and, sometimes, plexus. The endothelial cells were arranged regularly and small pores were observed. 2. In irradiated normal tongue the capillaries were curved slightly and formed plexus on initial day of post-irradiation. On third day the capillaries and capillary pores were dilated and the endothelial cell arrangement was irregular. The effects of irradiation were gradually increased from initial to the 3rd day, though it was decreased after 7th day. 3. The vasculature of DMBA induced tongue cancer group were very irregular, and large avascular lesions were formed according to the cancer necrosis or tumor cell nest and the vasculature was narrowed and paralleled around the avascular lesion by compression of cancer cell nest. The vascular wall was roughened and dilated, forming club shaped or varix. 4. The vessels were curved and formed reticular network in irradiated DMBA induced tongue carinoma group. The free end of newly formed capillaries had regular width, and also irregular club shaped or aneurysmal dilatation were observed. The vascular structures were destroyed and vessels were fused in tumor necrosis lesion. The radiation effects were marked on the first and third day of irradiation and the effects were decreased after seventh day and showed capillary regeneration.

• Journal of the Microelectronics and Packaging Society
• /
• v.26 no.4
• /
• pp.113-118
• /
• 2019

In this study, we investigated the growth of single-crystallinity α-Ga₂O₃ thin films on c-plane sapphire substrates using halide vapor pressure epitaxy. We also found the optimal growth conditions to suppress the phase transition of α-Ga₂O₃. Our results confirmed that the growth temperature and partial pressure of the reactive gas greatly influenced the crystallinity. The optimal growth temperature range was about 460~510℃, and the α-Ga₂O₃ thin films with the highest crystallinity were obtained at a III/VI ratio of 4. The thickness and surface morphology of the thin films was observed by scanning electron microscopy. The film thickness was 6.938 ㎛, and the full width at half maximum of the ω-2θ scan rocking curve was as small as 178 arcsec. The optical band gap energy obtained was 5.21 eV, and the films were almost completely transparent in the near-ultraviolet and visible regions. The etch pit density was found to be as low as about 6.0 × 10⁴ cm^-2.

• Transactions on Electrical and Electronic Materials
• /
• v.1 no.3
• /
• pp.14-17
• /
• 2000

Giga bit dynamic random access memory(DRAM) requires the capacitor of high dielectric films. Some metal oxides films have been proposed as the dielectric material . And Pt is one of the most promising electrode materials. However very little has been done in developing the etching technologoy Pt film. Therefore, it is the first priority to develop the technology for plasma etching of Pt film. In this study, the dry etching of Pt film was investigated in Inductively Coupled Plasma(ICP) etching system with Cl$_2$/Ar and HBr/Cl$_2$/Ar gas mixing. X-ray photoelectron spectroscopy (XPS) was used in analysis of sidewall residues for the understanding of etching mechanism. We found the etch residues on the pattern sidewall is mainly Pt-Pt, Pt-Cl and Pt-Br compounds, Etch profile was observed by Scanning Electron Spectroscopy(SEM) . The etch rate of Pt film at 10%, Cl$_2$/90% Ar gas mixing ration was higher than at 100%. Ar. Addition of HBr to Cl$_2$/Ar as an etching gas led to generally higher selectivity to SiO$_2$. And the etch residues were reduced at 5% HBr/5% Cl$_2$/90% Ar gas mixing ration. These pages provide you with an examples of the layout and style which we wish you to adopt during the preparation of your paper, Make the width of abstract to be 14cm.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.27 no.8
• /
• pp.486-490
• /
• 2014

$Al_2O_3$ films on silicon carbide were fabricated by Aerosol deposition with annealing temperature at $800^{\circ}C$ and $1,000^{\circ}C$. The effect of thermal treatment on physical properties of $Al_2O_3$ thin films has been investigated by XRD (X-ray diffraction), AFM (atomic force microscope), SEM (scanning electron microscope), and AES (auger electron spectroscopy). Also electrical properties have been investigated by Keithley 4,200 semiconductor parameter analyzer to explain the interface trapped charge density ($D_{it}$), flatband voltage ($V_{FB}$) and leakage current ($I_o$). $Al_2O_3$ films become crystallized with increasing temperature by calculating full width at half maximum (FWHM) of diffraction peaks, also surface morphology is observed by topography measurement in non-contact mode AFM. $D_{it}$ was $2.26{\times}10^{-12}eV^{-1}.cm^{-2}$ at $800^{\circ}C$ annealed sample, which is the lowest value in all samples. Also the sample annealed at $800^{\circ}C$ has the lowest leakage current of $4.89{\times}10^{-13}A$.

• Parasites, Hosts and Diseases
• /
• v.33 no.3
• /
• pp.231-234
• /
• 1995

Anisakid larvae were found from the liver and stomach of the codfish (Notothenia negzecta) caught from the Antarctic Ocean, South Pole, where the Polar Research Center of The Korea Ocean Research and Development Institute is operating- Through observations by scanning electron (SEM) and light microscopy (LM), they were identified as the third stage larvae of Pseunotewnnovo necipiens, a potential agent of human codworm anisakiasis. They measured 25.0-28.5 mm in length, and 0.6-0.8 mm in width. The SEM revealed a prominent boring tooth, three lips, and excretory pore at the anterior end, and a small but prominent mucron at the posterior end. From whole mounts and cross sections of the larvae the ventriculus, intestinal cecum and a Renette cell were found characteristically at the same plane. Raw eating of the codfish caught from the Antarctic Ocean near the South Pole should be avoided so as to prevent human codworm anisakiasis in this area.

• Korean Journal of Plant Taxonomy
• /
• v.34 no.4
• /
• pp.297-319
• /
• 2004

Morphological characters of 14 taxa in 6 sections Ischnostachya(one taxon), Anomalae(one taxon), Capitellatae (five taxa), Debiles (one taxon), Capillares (one taxon) and Molliculae (five taxa) of genus Carex (Cyperaceae) were reexamined. The epidermal patterns of perigynium, achene and leaf were investigated using by using a scanning eletron microscope (SEM) and a light microscope (LM). Morphological characters such as rhizome, spike, width of leaf, leaf sheath, involucre, involucre sheath, beak of perigynium, perigynium shape, and leaf epidermal patterns were useful for the identification of observed fourteen taxa. The number of spike, arrangement of psitillate or staminate spike and presence of bract were very useful characters to divide the treated 14 taxa into two groups. A key based on data was presented here.