• The Transactions of the Korean Institute of Power Electronics
• /
• v.13 no.5
• /
• pp.376-382
• /
• 2008

In this paper, scanning backlight unit which can reduce motion blur was designed and fabricated using flat fluorescent lamp. The FFL(flat fluorescent lamp) is in the limelight as a new illuminant of next generation BLU(backlight unit), because of simple assembly and reduction of driving components. In order to control lamp brightness, lamp on-time was controlled. In this experiment, it was confirmed that lamp brightness can be dimmed linealy and in a wide range.

• Journal of the Semiconductor & Display Technology
• /
• v.7 no.2
• /
• pp.29-33
• /
• 2008

LCD panels are increasingly used to show moving image material, for example in LCD television sets. However, moving images become blurred on LCD panels. One of the causes of motion blur is the slow reaction of LC(liquid crystal) cell to change in the pixel value. Another cause of motion blur is the hold-type characteristic of the LCD panel, during the frame time the image is shown continuously. This type of motion blur can be reduced with a scanning backlight. We have designed and fabricated a scanning backlight system that solves the hold-type characteristic problem in a way that Flat fluorescent lamp divided 6 blocks was scanned 60Hz.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.827-830
• /
• 2008

We proposed a new Mercury-free flat fluorescent lamp (MFFL) for LCD backlight which has the scanning ability to reduce the blurring edges of moving images. We expanded the single cell MFFL with 2.2 inch diagonal size into the multi-cell MFFL for the 32-inch LCD-TV backlight application, and examined its response characteristics and proposed a driving scheme for scanning.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.710-713
• /
• 2008

LED Scanning Backlight Stereoscopic Display with Shutter Glasses is provided to realize stereoscopic image viewing even in a liquid crystal display. The eye shutter signal is alternately switched from the left eye to the right eye with 120Hz of LCD Vertical synchronization (V-sync).

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.1326-1329
• /
• 2009

In large-area LCD displays, we have developed two new control technologies for high-power LED backlight. The Novel control technology called scanning control and local gray control. In addition, a conceptual display system power management was developed. We have implemented high power-LED module driving system which can achieve power saving and cost down. Finally, we designed LED light-bar module of the side type as a backlight source. It not only achieved light & thin but also reduced the quantity of LEDs.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.14 no.1
• /
• pp.8-14
• /
• 2009

A lamp which is currently employed to LCD(Liquid Crystal Display) Backlight is almost CCFL(Cold Cathod Fluorescent Lamp) and EEFL(External Electrode Fluorescent Lamp). However, the use of these lamps is being restricted as RoHS(the Restriction of the use of certain Hazardous Substances in electrical and electronic equipment) regulation is gradually reinforced. According to this situation, the manufacturing of a lamp which doesn't use mercury is unescapable. Moreover, LCD TV has a defect which take place Motion Blur phenomenon due to response time of LC(Liquid Crystal), and Hold-type characteristic which only exists in LCD differently to CRT, PDP. In this paper, an inverter is proposed to drive a plane light source lamp which is not containing mercury. Driving circuit of proposed inverter is simple because the number of semiconductor device and magnetic device is reduced by using forward topology. Also, Motion Blur phenomenon is decreased by dividing the plane light source lamp to six block along vertical direction, and scanning. Finally, we proved usefulness of proposed inverter through experiment.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.441-442
• /
• 2009

A wavelength multiplexing based stereoscopic 3D-LCD will be introduced. A new 120 Hz scanning RGB-backlight unit was developed. This backlight module was combined with a standard 120Hz LCD. The 3D-LCD based on interference filter glasses offers an outstanding channel separation and a wide viewing angl.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.1405-1408
• /
• 2008

Synchronization signal circuit system for low cross-talk stereoscopic display. We proposed the employment of the scanning beams of any adjacent scanning regions gradually scan from upper to down direction of the LED backlight panel.

• Proceedings of the KIPE Conference
• /
• 2008.06a
• /
• pp.553-555
• /
• 2008

현재 사용하고 있는 LCD(Liquid Crystal Display) Backlight용 램프는 주로 CCFL(Cold Cathod Fluorescent Lamp)과 EEFL(External Electrode Fluorescent Lamp)이 사용되고 있다. 하지만 이 램프는 수은을 사용하여 RoHS(the Restriction of the use of certain Hazardous Substances in electrical and electronic equipment)규제가 점점 강화되면서 사용이 제한되고 있으며, 이에 따라 수은을 사용하지 않는 램프의 제작이 불가피해지고 있다. 또한 LCD TV는 CRT와 PDP와는 다른 LCD만의 Hold-type 특성과 LC(Liquid Crystal)의 응답속도로 인하여 Motion Blur현상이 나타나는 단점이 있다. 본 논문에서는 RoHS 규제를 만족시키는 무수은 면광원 램프를 구동하기 위한 인버터를 제안한다. 제안한 인버터는 포워드 방식을 사용하여 반도체 소자 및 자기 소자의 수를 줄여서 구동회로가 간단하다. 또한 면광원 램프를 세로방향으로 6블록으로 나누어 스캔구동을 하여 Motion Blur현상을 저감 시켰다. 끝으로 실험을 통하여 제안한 인버터의 유용성을 입증하였다.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.58 no.4
• /
• pp.495-498
• /
• 2009

To improve the efficiency of the high voltage cable for BLU(backlight unit) of TFT-LCD(Thin Film Transistor-Liquid Crystal Display), the analysis for the trial products(UL3239, UL3633) is conducted by using SEM(scanning electron microscope) and EDX(Energy Dispersive X-ray Spectroscopy). The result that it is possible to accumulate the know-how to about stranding pitch through effective improvement of stranding process. The troubles which are the badness of withstanding voltage and tensile strength etc. are solved by development of excellent material. Furthermore, phenomenon of conductor unfasten in the harness work is solved by improvement of the stranding wire process.