• 한국생활과학회지
• /
• 제24권5호
• /
• pp.687-700
• /
• 2015

Lines of non-extension (LoNEs) on torso surface during arm abduction were investigated to provide appropriate location for inserting less-extensible yarns which can be used as seams for design and or clothing pressure variation. As experimental methods, reference points about 3 cm apart were marked on the skin and scanned at 30, $90^{\circ}$ and $135^{\circ}$ arm abduction. Skin deformation was measured by connecting reference points in horizontal, vertical and various angles of diagonal directions. Observation of skin deformation was made within the separated sections of the torso as well as integrated ones to cover the various occasions of design application. LoNEs of front and back torso were provided as mapping lines. Actual compression wear of three types was constructed with different pattern reduction rate at each separated section using LoNEs as boundary cutting lines. Clothing pressure and subjective evaluations of those three compression wear were evaluated by six subjects. LoNEs found in this study were useful as seam lines to differentiate clothing pressure at each part of the body, providing positive wear sensation. It is also expected that LoNEs can be paths for less strechable conductive yarns of IT-integrated upper garments.

• 한국정보통신학회논문지
• /
• 제13권10호
• /
• pp.1997-2003
• /
• 2009

음악 연구에 따른 컴퓨터의 역할이 점차 중요한 비중을 차지함에 따라 효과적인 악보 인식과 효율적인 악보의 편집 및 수정 방법이 요구된다. 기존의 수동 입력 방식에서는 악보를 부정확하게 입력하여 수정하는 경우에는 작업시간이 많이 소요되며, 각 수정 프로그램에서 만든 악보는 특정 프로그램에서만 재수정이 가능하다는 단점이 있다. 본 논문에서는 이러한 단점을 보완하기 위하여 이미 작성 되어있는 악보들을 자동으로 인식하는 방법을 제안한다. 제안된 악보 인식 방법은 수평 히스토그램을 이용하여 악보 이미지의 오선을 제거한 후, 4 방향 윤곽선 추적 알고리즘을 적용하여 잡음을 제거하고 Grassfire 알고리즘을 적응하여 악보 구성 기호들을 추출한다. 추출된 악보 구성 기호들은 hierarchical ART2 알고리즘을 적용하여 인식된다. 제안된 악보 인식 방법 의 성능을 평가하기 위해 100장의 악보 영상을 대상으로 실험한 결과, 제시된 hierarchical ART2 알고리즘을 이용한 악보 영상의 인식 방법이 효율적임을 확인하였다.

• 대한원격탐사학회지
• /
• 제26권1호
• /
• pp.39-45
• /
• 2010

본 연구는 지상라이다 자료의 점군간 자동정합을 위해 인접한 두 점군 자료와 함께 획득되는 2차원의 강도영상 자료로부터, 2개 영상에서 동시에 관측되는 특징점들을 이용하여 SIFT 알고리즘에 의해 공액점을 선정하였다. 또한 매칭 오류점 배제를 위해 RANSAC 알고리즘을 적용하여 정합 정확도 향상을 도모하였다. 두 점군간의 변환식 매개변수인 3차원 회전변환 각과 수직/수평 이동량을 계산, 그 결과를 기존 수작업에 의한 결과와 비교하였다. 건국대학교 이과대학 건물을 대상으로 실험한 결과, 자동매칭을 통한 변환매개변수와 수작업으로 한 변환매개변수의 차이는 X, Y, Z, 방향으로 각각 0.011m, 0.008m, 0.052m로서 자동정합 자료의 활용이 가능하다고 판단하였다.

• The Journal of Advanced Prosthodontics
• /
• 제13권5호
• /
• pp.316-326
• /
• 2021

PURPOSE. Purpose of this in vitro study was to determine the accuracy of different intraoral scans versus laboratory scans of impressions and casts for the digitization of an edentulous maxilla. MATERIALS AND METHODS. A PEEK model of an edentulous maxilla, featuring four hemispheres on the alveolar ridges in region 13, 17, 23 and 27, was industrially digitized to obtain a reference dataset (REF). Intraoral scans using Cerec Primescan AC (PRI) and Cerec AC Omnicam (OMN), as well as conventional impressions (scannable polyvinyl siloxane) were carried out (n = 25). Conventional impressions (E5I) and referring plaster casts were scanned with the inEOS X5 (E5M). All datasets were exported in STL and analyzed (Geomagic Qualify). Linear and angular differences were evaluated by virtually constructed measurement points in the centers of the hemispheres (P13, P17, P23, P27) and lines between the points (P17-P13, P17-P23, P17-P27). Kolmogorov-Smirnov test and Shapiro-Wilk test were performed to test for normal distribution, Kruskal-Wallis-H test, and Mann-Whitney-U test to detect significant differences in trueness, followed by 2-sample Kolmogorov-Smirnov test to detect significant differences in precision (P < .008). RESULTS. Group PRI showed the highest trueness in linear and angular parameters (P < .001), while group E5I showed the highest precision (P < .001). CONCLUSION. Intraoral scan data obtained using Primescan showed the highest trueness while the indirect digitization of impressions showed the highest precision. To enhance the workflow, indirect digitization of the impression itself appears to be a reasonable technique, as it combines fast access to the digital workflow with the possibility of functional impression of mucosal areas.

• 한국측량학회지
• /
• 제11권2호
• /
• pp.69-77
• /
• 1993

CCD 카메라 스캐너에 의한 지상사진의 스캐닝에 있어서 발생하는 기하학적 왜곡을 외부표정요소를 이용하여 수치적으로 보정하는 기법을 제시하였다. 먼저 CCD 카메라 스캐너의 외부표정요소를 구한 후, 이를 이용하여 수치화상의 전 화소에 대응하는 사진좌표를 구하였다. 얻어진 사진좌표와 수치화상 데이터 값으로부터, 거리의 역에 따른 가중평균법을 적용하여 X 및 Y좌표 0.05mm 마다의 스캐닝 왜곡이 보정된 화상을 작성할 수 있었다. 검사점의 보정화상좌표와 실측사진좌표를 비교하여 스캐닝 기하학적 왜곡 보정화상 작성기법의 유효성을 검증할 수 있었다.

• 대한토목학회논문집
• /
• 제13권5호
• /
• pp.191-199
• /
• 1993

스캐닝된 지상사진의 수치화상데이타를 이용하여 정사투영화상을 작성하는 기법을 제시하였다. 수치화상데이타를 얻기 위하여 촬영된 지상사진을 CCD 카메라 스캐너로 스캐닝한 후, 4차 다항식을 적용하여 스캐닝과정에서 생긴 기하왜곡을 보정하였다. 좌우 화상에 있어서 각 화소의 동일점을 찾기 위하여 자동매칭기법을 적용하였으며 외부표정요소를 이용한 공간교차이론으로 각 화소의 3차원 지상좌표를 구하였다. 얻어진 3차원 지상좌표와 우측화상데이타값으로부터, 거리의 역에 따른 가중평균법을 사용하여 1개 화소의 크기가 $1mm{\times}1mm$ 되는 정사투영화상을 작성하였다. 검사점에 대하여, 작성된 정사투영화상상의 X 및 Y좌표와 지상관측된 좌표를 비교하여 정사투영화상 작성기법의 유효성을 검증할 수 있었다.

• 한국해양공학회지
• /
• 제23권1호
• /
• pp.135-139
• /
• 2009

In the line heating for the plate forming of a ship's hull, an in line assessment of completion is necessary for an automated production system. In the current curved plate forming process, a fabricated plate is compared to a template that is made in the mold loft and is used for the determination of the heating line for the next step. In this paper, a new method is presented for the in line assessment of completion for curved plate forming. This method uses a 3-D scanner. For the registration of the scanned data for a surface and the target surface, the ICP (Iterative Closest Points) method was adopted. A computer program was developed to carry out the registration, check for similarities, visualize the surface, and control the results. This program was applied to a sample curved plate forming process.

• 한국CDE학회논문집
• /
• 제21권3호
• /
• pp.341-352
• /
• 2016

Manual 3D pipeline modeling from LiDAR scanned point cloud data is laborious and time-consuming process. This paper presents a method to extract the pipe, elbow and branch information which is essential to the automatic modeling of the pipeline connection. The pipe geometry is estimated from the point cloud data through the Hough transform and the elbow position is calculated by the medial axis intersection for assembling the nearest pair of pipes. The branch is also created for a pair of pipe segments by estimating the virtual points on one pipe segment and checking for any feasible intersection with the other pipe's endpoint within the pre-defined range of distance. As a result of the automatic modeling, a complete 3D pipeline model is generated by connecting the extracted information of pipes, elbows and branches.

• The Journal of Advanced Prosthodontics
• /
• 제7권6호
• /
• pp.475-483
• /
• 2015

PURPOSE. The objective of this study was to evaluate the influence of various cement types on the stress distribution in monolithic zirconia crowns under maximum bite force using the finite element analysis. MATERIALS AND METHODS. The models of the prepared #46 crown (deep chamfer margin) were scanned and solid models composed of the monolithic zirconia crown, cement layer, and prepared tooth were produced using the computer-aided design technology and were subsequently translated into 3-dimensional finite element models. Four models were prepared according to different cement types (zinc phosphate, polycarboxylate, glass ionomer, and resin). A load of 700 N was applied vertically on the crowns (8 loading points). Maximum principal stress was determined. RESULTS. Zinc phosphate cement had a greater stress concentration in the cement layer, while polycarboxylate cement had a greater stress concentration on the distal surface of the monolithic zirconia crown and abutment tooth. Resin cement and glass ionomer cement showed similar patterns, but resin cement showed a lower stress distribution on the lingual and mesial surface of the cement layer. CONCLUSION. The test results indicate that the use of different luting agents that have various elastic moduli has an impact on the stress distribution of the monolithic zirconia crowns, cement layers, and abutment tooth. Resin cement is recommended for the luting agent of the monolithic zirconia crowns.

• 대한기계학회논문집A
• /
• 제26권10호
• /
• pp.1961-1970
• /
• 2002

A laser scanner is widely used fur a device fur acquiring point data in reverse engineering. It is more efficient to generate a surface automatically from the line-typed data than scattered data of points clouds. In the case of a compound model, it is hard to represent all the scanned data into one surface maintaining its original line characteristics. In this paper, a method is presented to generate a surface by the segmentation of measured point data. After forming triangular net, the segmentation is done by the user input such as the angle between triangles, the number of facets to be considered as small segment, and the angle for combining small segment. B-spline fitting is implemented to the point data in each segment. The surface generation through segmentation shows a reliable result when it is applied to the models with curvature deviation regions. An useful algorithm for surface reconstruction is developed and verified by applying an practical model and shows a good tools fur reverse engineering in design modification.