• Journal of Information Processing Systems
• /
• v.15 no.2
• /
• pp.344-358
• /
• 2019

Surveillance cameras have installed in many places because security and safety is becoming important in modern society. Through surveillance cameras installed, we can deal with troubles and prevent accidents. However, watching surveillance videos and judging the accidental situations is very labor-intensive. So now, the need for research to analyze surveillance videos is growing. This study proposes an algorithm to track multiple persons using SURF and background subtraction. While the SURF algorithm, as a person-tracking algorithm, is robust to scaling, rotating and different viewpoints, SURF makes tracking errors with sudden changes in videos. To resolve such tracking errors, we combined SURF with a background subtraction algorithm and showed that the proposed approach increased the tracking accuracy. In addition, the background subtraction algorithm can detect persons in videos, and SURF can initialize tracking targets with these detected persons, and thus the proposed algorithm can automatically detect the enter/exit of persons.

• Current Optics and Photonics
• /
• v.5 no.5
• /
• pp.524-531
• /
• 2021

In an integral-imaging microscopy (IIM) system, a microlens array (MLA) is the primary optical element; however, surface errors impede the resolution of a raw image's details. Calibration is a major concern with regard to incorrect projection of the light rays. A ray-tracing-based calibration method for an IIM camera is proposed, to address four errors: MLA decentering, rotational, translational, and subimage-scaling errors. All of these parameters are evaluated using the reference image obtained from the ray-traced white image. The areas and center points of the microlens are estimated using an "8-connected" and a "center-of-gravity" method respectively. The proposed approach significantly improves the rectified-image quality and nonlinear image brightness for an IIM system. Numerical and optical experiments on multiple real objects demonstrate the robustness and effectiveness of our proposed method, which achieves on average a 35% improvement in brightness for an IIM raw image.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.12 no.1
• /
• pp.65-73
• /
• 2007

This paper presents an on-line correction method of current measurement errors for a pure-integration-based flux estimation down to 1-Hz stator frequency. An observer-based approach is taken as one possible solution of eliminating the dc offset and the negative sequence component of unbalanced gains in the synchronous coordinate. At the same time, the positive sequence component estimation is performed by creating an error signal between a motor model reference and an estimated q-axis rotor flux established by a permanent magnet (PM) in the synchronous coordinate. The compensator utilizes a PI controller that controls the error signal to zero. The proposed technique further contains a residual error compensator to completely eliminate miscellaneous disturbances in the estimated flux. The developed algorithm has been implemented on a 1.1-kW permanent magnet synchronous motor (PMSM) drive to confirm the effectiveness of the proposed scheme.

• Journal of Korea Multimedia Society
• /
• v.4 no.3
• /
• pp.215-221
• /
• 2001

In this paper, we propose a algorithm that apply different weight-sampling values according to the directions of the contour to reduce errors that can arise in extracting the feature of an contoured object. Especially, it 8is designed to have invariant property under the circumstances like the rotation, transition and scaling. The output matrix of feature set is made through the size function of the proposed algorithm, and the euclidean distance between the output matrix and that of the original image is calculated. Experimental result shows that the proposed algorithm reduces the euclidean distance between the original image and the changed image-by 57% in rotation and by 91% in scaling.

• Journal of Institute of Control, Robotics and Systems
• /
• v.20 no.1
• /
• pp.12-17
• /
• 2014

In this paper, we propose a controller capable of reducing the effect of measurement errors under AC and DC noise. Typically, the control system measures data through a sensor. If sensor noise is included in a controller via the feedback channel, the signal is distorted and the entire system cannot work normally. Therefore, some appropriate action to counter the measurement error effect is essential in the controller design. Our controller is equipped with a gain-scaling factor and a compensator to reduce the effect of measurement error in the feedback signal. Also, we use a switching control strategy to enhance the performance of the controller regarding convergence speed. Our proposed controller can therefore effectively reduce the AC and DC noise of the sensor. We analyze the proposed controller by Laplace transform technique and our control method is verified via MATLAB simulation.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2018.05a
• /
• pp.150-150
• /
• 2018

The Numerical Weather Prediction (NWP) models provide information for weather forecasts. The highly nonlinear and complex interactions in the atmosphere are simplified in meteorological models through approximations and parameterization. Therefore, the simplifications may lead to biases and errors in model results. Although the models have improved over time, the biased outputs of these models are still a matter of concern in meteorological and hydrological studies. Thus, bias removal is an essential step prior to using outputs of atmospheric models. The main idea of statistical bias correction methods is to develop a statistical relationship between modeled and observed variables over the same historical period. The Model Output Statistics (MOS) would be desirable to better match the real time forecast data with observation records. Statistical post-processing methods relate model outputs to the observed values at the sites of interest. In this study three methods are used to remove the possible biases of the real-time outputs of the Weather Research and Forecast (WRF) model in Imjin basin (North and South Korea). The post-processing techniques include the Linear Regression (LR), Linear Scaling (LS) and Power Scaling (PS) methods. The MOS techniques used in this study include three main steps: preprocessing of the historical data in training set, development of the equations, and application of the equations for the validation set. The expected results show the accuracy improvement of the real-time forecast data before and after bias correction. The comparison of the different methods will clarify the best method for the purpose of the forecast skill enhancement in a real-time case study.

• Journal of dental hygiene science
• /
• v.19 no.3
• /
• pp.190-197
• /
• 2019

Background: The Internet has advantages in terms of accessibility and amount of information, and the search for health information over the Internet is increasing exponentially. The purpose of this study is to analyze the information generated about some dental treatment on the internet by year. Methods: Naver Knowledge (JisikIn in Korean) which is an interactive search service was selected as the first search site in Korea. Scaling, wisdom tooth extraction, and endodontic treatment that can be paid by Korean health insurance were selected. Finally, 4,729 questions about scaling, 23,963 wisdom teeth extraction questions and 17,733 endodontic treatment questions were extracted. The question contents, the information about the questioner and the answerer, and an error of answers were investigated. Frequency analysis was used and chi-square test was used if necessary. Results: The most frequently asked questions were discomfort and dissatisfaction after the treatment. The need for treatment was the second in questions of the wisdom tooth extraction and endodontic treatment, but the health insurance benefit was the second in dental scaling. Most of the questioners didn't disclose personal information. The public answered the most in 2013~2014, but the highest percentage of the respondents was experts in 2017. Responses were mostly personal experience, but showed a tendency to decrease with years, and professional knowledge showed an increasing tendency. The error of the answer has also gradually decreased. Conclusion: Questions about dental care over the Internet are increasing exponentially, experts are responding increasingly, and errors in answers are decreasing. Nevertheless, it is necessary to pay attention to the related expert group to prevent misinformation.

• Nuclear Engineering and Technology
• /
• v.38 no.1
• /
• pp.11-32
• /
• 2006

System thermal-hydraulic codes have been used in the past decades in the areas of design, operation, licensing and safety of Nuclear Power Plants (NPPs). The development and validation of these codes have reached a high degree of maturity, through the consideration of huge experiments and advanced numerical models. Nowadays, the analyses are based upon realistic approaches rather than the conservative evaluation models. However the applications of these computational tools require preliminary qualification issues. Although huge amounts of financial and human resources have been invested for the development and improvement of codes, the calculation results are still affected by errors. In the sophisticated nuclear technology, design and safety of NPP, these errors must be quantified. An overview of the state of the art of the current thermal-hydraulic system code is developed and the need of uncertainty analysis in code calculations is emphasized. Several sources of uncertainty have been classified and commented, and typical applications of such methods are shown.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.14 no.1
• /
• pp.15-21
• /
• 2014

Due to the development of manufacturing technology scaling, more transistors can be placed on a cache memories of a processor. However, processors become more vulnerable to the soft errors because of highly integrated transistors, the reliability of cache memory must consider seriously at the design level. Various researches are proposed to overcome the vulnerability of soft error, but researches of tag bit are proposed very rarely. In this paper, we revaluate the reliability improvement technique for tag bit, and analyse the protection rate of write-back operation, which is a typical case of not satisfying temporal locality. We also propose the methodology to improve the protection rate of write-back operation. The experiments of the proposed scheme shows up to 76.8% protection rate without performance degradations.

• Journal of Microbiology and Biotechnology
• /
• v.23 no.5
• /
• pp.689-698
• /
• 2013

The production and characterization of an active recombinant N-acetylgalactosamine-6-sulfate sulfatase (GALNS) in Escherichia coli BL21(DE3) has been previously reported. In this study, the effect of the signal peptide (SP), inducer concentration, process scale, and operational mode (batch and semi-continuous) on GALNS production were evaluated. When native SP was presented, higher enzyme activity levels were observed in both soluble and inclusion bodies fractions, and its removal had a significant impact on enzyme activation. At shake scale, the optimal IPTG concentrations were 0.5 and 1.5 mM for the strains with and without SP, respectively, whereas at bench scale, the highest enzyme activities were observed with 1.5 mM IPTG for both strains. Noteworthy, enzyme activity in the culture media was only detected when SP was presented and the culture was carried out under semi-continuous mode. We showed for the first time that the mechanism that in prokaryotes recognizes the SP to mediate sulfatase activation can also recognize a eukaryotic SP, favoring the activation of the enzyme, and could also favor the secretion of the recombinant protein. These results offer significant information for scaling-up the production of human sulfatases in E. coli.