• Physical Therapy Korea
• /
• v.11 no.1
• /
• pp.1-17
• /
• 2004

The purposes of this study were to find correlations among Fugl-Meyer Assessment scale, gait speed, and Timed Up & Go test (TUG) and to predict gait ability from subscales of Fugl-Meyer Assessment scale. The study population consisted of 30 stroke patients referred to the Department of Rehabilitation Medicine in the Bundang Jaesang General Hospital. All subjects were ambulatory with or without an assistive device. All participants were assessed on Fugl-Meyer Assessment scale and gait speed (m/s), TUG (s). The data were analyzed using independent t-test, Pearson product moment correlation analysis and stepwise multiple regression. The results revealed that all items of Fugl-Meyer Assessment scale, except passive joint range of motion were significantly correlated with gait speed and TUG. In particular, sensation score, lower extremity motor and coordination score have a significant correlation with gait speed and TUG (p<.05). The sensation score and lower extremity motor score were important factors in comfortable gait and maximal gait speed. Their power of explanation regarding comfortable gait and maximal gait speed were 63.0% and 65.0%, respectively. The sensation score and lower extremity coordination score were important factors in TUG. Their power of explanation regarding TUG was 55.0%. These results showed that Fugl-Meyer Assessment scale is significantly correlated with gait speed and TUG. Therefore Fugl-Meyer Assessment scale is an appropriate assessment tool to predict gait ability of patients with stroke. Further study about gait speed and TUG by change of Fugl-Meyer Assessment score is needed using a longitudinal study design.

• KDI Journal of Economic Policy
• /
• v.14 no.2
• /
• pp.29-54
• /
• 1992

Recent studies on the economic effects of trade liberalization and economic integration have emphasized the significant gains associated with product differentiation and scale economies. Securing access to markets in other countries will make it possible to increase product variety and capture scale economies, thus, expanding the gains from trade. Liberalization is also expected to introduce foreign competition into the previously closed market. Concurrently, the liberalization will improve the competitive market environment for firms selling in the domestic market. Firms will be pressed to either exit or reduce cost. The output per firm, then, will increase due to the exit of rival firms, and the average total cost will decline due to the economies of scale. 'Rationalization' of the production process will eventually follow. This paper addresses the economic effects of (counterfactual) bilateral tariff elimination between Korea and Japan. It computationally assesses the gains from liberalization as well as the resource allocations and welfare effects associated with the tariff reduction. The endogenous determination of the key parameters distinguishes this paper from others. The firm's perceived elasticity of demand and elasticity of substitution in the present model are calibrated to be consistent with the base year data. Korea, Japan, and the rest of the world are modeled explicitly. The sectoral coverage of the model includes twenty-three tradable product categories based on three-digit SITC industries and seven nontradable categories based on one-digit SITC industries. Product categories are also classified into perfectly competitive and imperfectly competitive ones. In the imperfectly competitive industries, product differentiation exists at the firm level, while the perfectly competitive industries are characterized by national product differentiation. The simulation results of bilateral tariff reduction are reported. Tariff elimination tends to increase intra-industry trade flows so that the total amount of exports and imports of both countries expand. Yet, Japan is expected to increase the bilateral trade surplus in the wake of the mutual tariff reduction. Terms-of-trade for Korea will not change, while for Japan it will deteriorate. Equivalent variations reflecting the change in consumer surplus (welfare) will favor Korean consumers. Total output, however, will not change substantially, recording 0.5 and 0.6% for Japan and Korea, respectively. An interesting finding in the analysis is that the gains from increased competition and scale efficiency are not as prevailing as expected in theory.

• Science of Emotion and Sensibility
• /
• v.11 no.2
• /
• pp.215-226
• /
• 2008

The previous research suggested a self-report questionnaire-type scale to measure a user's emotions naturally expressed while using a product. Using the scale, this research measured their emotions expressed while users use cellular phones naturally for a certain time without setting tasks. The results suggest that the cellular phone of high usability lead to higher 'Satisfaction in Usability' and lower 'Uncomfortableness' than the cellular phone with usability flaws. On the other hand the cellular phone with usability flaws lead to higher 'Uncomfortableness' and lower 'Satisfaction in Usability' but higher in other representative emotions such as 'Aesthetics', 'Novelty', 'Pleasure', and 'Excellence' than the other cellular phone. It can be insufficient to define the correlation between the product usability and the user's emotions based on the results of this research: however, the correlation between these two factors will be discovered in more detail by analyzing the changes of the user's emotions according to the length of time of using cellular phone.

• 한국신재생에너지학회:학술대회논문집
• /
• 2008.05a
• /
• pp.479-482
• /
• 2008

Since late of 2000, KIER has developed a novel pyrolysis process for production of fuel oils from polymer wastes. It could have been possible due to large-scale funding of the Resource Recycling R&D Center. The target was to develop an uncatalyzed, continuous and automatic process producing oils that can be used as a fuel for small-scale industrial boilers. The process development has proceeded in three stages bench-scale unit, pilot plant and demonstration plant. As a result, the demonstration plant having capacity of 3,000 tons/year has been constructed and is currently under test operation for optimization of operation conditions. The process consisted of four parts ; feeding system, cracking reactor, refining system and others. Raw materials were pretreated via shredding and classifying to remove minerals, water, etc. There were 3 kind of products, oils(80%), gas(15%), carbonic residue(5%). The main products i.e. oils were gasoline and diesel. The calorific value of gas has been found to be about 18,000kcal/$m^3$ which is similar to petroleum gas and shows that it could be used as a process fuel. Key technologies adopted in the process are 1) Recirculation of feed for rapid melting and enhancement of fluidity for automatic control of system, 2) Tubular reactor specially-designed for heavy heat flux and prevention of coking, 3)Recirculation of heavy fraction for prevention of wax formation, and 4) continuous removal & re-reaction of sludge for high yield of main product (oil) and minimization of residue. The advantages of the process are full automation, continuous operation, no requirement of catalyst, minimization of coking and sludge problems, maximizing the product(fuel oil) yield and purity, low initial investment and operation costs and environment- friendly process. In this presentation, background of pyrolysis technology development, the details of KIER pyrolysis process flow, key technologies and the performances of the process will be discussed in detail.

• Resources Recycling
• /
• v.18 no.2
• /
• pp.30-38
• /
• 2009

In this research, we studied the scale-up triboelectrostatic process for separation of PVC from higher gravity fraction of plastic wastes produced from wet gravity separation process. High density polyethylene (HDPE) was found to be the most effective materials for a tribo-charger in the separation of plastic tailings. In a commercial scale triboelelctrostatic separator unit, using the HDPE pipe-line charger, a grade of 99.1% with PET, PS and others and a recovery of 86% was obtained under optimum conditions at over 250 kV/m electric field, a splitter position of -8 cm from the center, and less than 40% relative humidity. The developed unit can process the plastic wastes at a 300 kg/h, and the product can be utilized as RPF or RDF of over grade 2.

• Industry Promotion Research
• /
• v.5 no.3
• /
• pp.45-51
• /
• 2020

This study analyzed the influence of investment and fostering support on gross regional product by utilizing big data using multiple regression analysis. Gross regional product (GRDP) is an index that intensively contains the production scale, expenditure level, income level, and industrial structure of each region, and is an important data used for regional economic analysis and national policy establishment. In order to properly carry out the country's major national tasks, it is necessary to accurately grasp the regional economy, and as a result, interest in regional gross domestic product is rapidly increasing. In particular, foreign investment has a significant impact on the economy of the host country, and many empirical analyzes are being conducted. In this study, correlation analysis and multiple regression analysis were conducted to examine the influence of foreign investment and domestic development support on gross regional product, and as a result, it was concluded that investment and support as a whole had a positive effect on gross regional product.

• Journal of Digital Convergence
• /
• v.18 no.11
• /
• pp.443-448
• /
• 2020

The purpose of research is identifying visual factors affecting purchase of convenient store packed-meals through mobile applications. Previous studies have not covered mobile applications on purchase of convenient store packed-meals and this inspired the research topic. Document analysis and online survey are mainly implemented and 4 visual factors; typography, product image, main color, brand logo have been set as a research variables. It is revealed that consumers recognize product image prior to the rest and their purchase intentions are most significantly affected by product image. In conclusion, the product image should encourage consumers to have expectation on packed-meal and need to deliver credibility at the same time. Hence, the application should be designed to solely spotlight product image to lead consumer's concentration on it. The research can be further expanded by including non-visual factors as its variables or increasing scale of survey samples.

• Design Convergence Study
• /
• v.18 no.6
• /
• pp.27-39
• /
• 2019

The purpose of this study is to develop design guidelines for developing innovative products utilizing the characteristics of creative consumers(cresumers) who create alternative usages of consumer products, and to suggest effective way of applying the guidelines in design process. To do this, the study conducted the analysis on the characteristics and types of cresumers and in-depth interviews and observations of actual cresumers. The study was able to initially come up with 131 items in 7 categories through keywordization and affinity analysis of prior outcomes, and reorganized and modified those to 52 items in 4 categories. After verification of co-relationship and credibility analysis with 2 evaluation sessions (7-scale SD), the study has reached 4 categories - product concept development, product development, product use environment, and market possibility - with 46 guideline items. The study developed a design toolkit to effectively apply the guidelines in the product development process. The toolkit consists of three chapters and provides explanations and related examples to clarify the categories and individual guidelines, designed in the form of cards and booklet.

• Korea Science and Art Forum
• /
• v.20
• /
• pp.159-171
• /
• 2015

Service elements are added to the product to improve the company it its sales and innovation. The servitization process could take many different routes reflecting various properties of the manufacturing firm and its business contexts. Product-service systems (PSS) design method developed at Sungkyunkwan Universty, Service Design Institute, has been applied to a small furniture manufacturing company to demonstrate the utility of the method and to devise improvements. First, the business context of the company has been analyzed and key values have been identified. A co-creative session has been conducted to develop initial service concepts to drive those key values. The diverse positioning of those service concepts on the scale of service supporting product and service support customer is then developed to plan servitization phases. The specific service concepts are about company-customer relationship building as well as customization and personalization in this case. Initial service concepts are detailed with service blueprint so that prototyping and customer experience evaluation can be done. Business models in different servitization phases are designed. Further prototyping and customer experience evaluation has been done with business strategy improvements. In this paper, the proudct-service systems design method has been reviewed and the specific and real processes of the servitization using design will be described with discussion on the improvement of the method and the enhancement of the business.

• Journal of the Korean Society for Precision Engineering
• /
• v.24 no.3 s.192
• /
• pp.108-116
• /
• 2007

To overcome many defects such as the high product cost, large energy consumption, and big space capacity in conventional mechanical machining, the miniaturization of machine tool and micro factory systems has been envisioned recently. The object of this paper is to research the effect of dynamic characteristic parameters in bolted-joint beams, which is widely applied to the joining of mechanical structures in order to identify structural system characteristics and to predict dynamic behavior according to scale-down from macro to micro system as the development of micro/meso-scale machine tool and micro factories. Modal parameters such as the natural frequency, damping ratio, and mode shape from modal testing and dynamic characteristics from finite element analysis are extracted with all 12 test beam models by materials, by size, and by joining condition, and then the results obtained by both methods are compared.