• Transactions of the Korean Society of Mechanical Engineers
• /
• v.10 no.6
• /
• pp.823-829
• /
• 1986

The Large-scale structure of the circular jet in the transition region, which influences the subsequent flow in the turbulent region, was studied experimentally. Measuring equipments are composed of the two channel hot-wire anemometer, the computer controlled two-directional traverse mechanism, the data acquisition system, and FFT-analyzer. The circular jet has 50mm diameter. The mean velocity distribution, the velocity fluctuation, the auto 'cross correlations and the power spectra were acquired at moderate Reynolds number of 10$^{4}$. And the VITA method was used to measure the convection velocity of Large-scale eddy. The phase of u'is in advance of that of v'in all regions. .over bar. $R_{u}$(.tau.=0) is approximately zero in the potential core region, but a small regular deviation is observed. At a position in the mixing layer region the convection velocity is different along the part of the eddy, and in this experiment the convection velocity of the inner region is larger than the outer region. The averge convection velocity of the eddy along y/D=0 was approximately constant in the transition region.D=0 was approximately constant in the transition region.

• Journal of Advanced Navigation Technology
• /
• v.28 no.3
• /
• pp.348-355
• /
• 2024

A current source capable of stably supplying current as a measurement medium is required in order to measure and test important facilities that require large-scale measurement current, such as a control element drive mechanism control system(CEDMCS), in case of dismantling a nuclear power plant. However, it can provides only voltage power as a source, not current, although direct voltage controlled constant current source is essential to test major equipment. That kind of source is not available to supply stable constant current regardless of load variation. It is just voltage supplier. Developing current source is not easy other than voltage source. Very large-scale current source up to ampere class more than such ten times of normal current is inevitable to test above mentioned equipment. So, we developed large-scale current source which is controlled by input DC voltage and supplies constant stable current to object equipment according to this requirement. We measured and tested nuclear power plant equipment using given real site data for a long time and afforded long period load test, and then proved its validity and verification. The developed invetion will be used future installed important equipment measuring and testing.

• Particle and aerosol research
• /
• v.5 no.2
• /
• pp.45-52
• /
• 2009

Black carbon, which is a by-product of combustion of fossil fuel and biomass burning, is the component that imposes the largest uncertainty on quantifying aerosol climate effect. The direct, indirect and semi-direct climate effects of black carbon depend on its state of the mixing with other water-soluble aerosol components. The process that transforms hydrophobic externally mixed black carbon particles into hygroscopic internally mixed ones is called "aging". In most climate models, simple parameterizations for the aging time scale are used instead of solving detailed dynamics equations on the aging process due to the computation cost. In this study, a new parameterization for the black carbon aging time scale due to condensation and coagulation is presented as a function of the concentration of hygroscopic atmospheric components and the black carbon particle size. It is shown that the black carbon aging time scale due to condensation of sulfuric acid vapors varies to a large extent depending on the sulfuric acid concentration and the black carbon particle size. This result indicates that the constant aging time scale values suggested in the literature cannot be directly applied to a global scale modeling. The aging time scale due to coagulation with internally mixed aerosol particles shows an even stronger dependency on particle size, which implies that the use of a particle-size-independent aging time scale may lead to a large error when the aging is dominated by coagulation.

• Journal of the Korean Chemical Society
• /
• v.30 no.1
• /
• pp.3-8
• /
• 1986

The investigation of the effect of solvent structure on the first-order solvolysis of cis-$[Co(en)_2ClNO_2]^+$ion has been extended to water + co-solvent mixtures where the co-solvents are glycerol, ethylene glycol, isopropyl alcohol and t-butyl alcohol. Rates of solvolysis have been evaluated by spectrophotometric method at temperature 25∼30$^{\circ}$C. The polarity of solvent has influence on the variation of rate constant. The non-linear plot of the rate constant in log scale versus $\frac{D-1}{2D+1}$ implies that change in solvent structure with composition plays an important role in determining the variation of rate constant. The linearity of the plot of the rate constant in log scale versus the Grundwald-Winstein Y factor confirms that the solvolysis is an Id-type process with considerable extension of the metal chloride bond in the transition state. In the Kivinen equation the slope of the plot of log k versus $log(H_2O)$ suggests that the solvolysis is also an Id-type process. The application of free energy cycle shows that the effect of solvent structure is greater in the transition state than in the initial state.

• Proceedings of the KAIS Fall Conference
• /
• 2011.05b
• /
• pp.629-631
• /
• 2011

본 논문에서는 현재 Jazz에서 사용되어지는 화성기법을 Pat Metheny의 작품인 "Bright Size Life"를 통해서 알아보았다. D Major Scale이 선율에 주로 사용된 본 작품은 A 부분에서는 선율이 완전 5도의 음정으로 발전 되었고 B부분에서는 장7도의 음정을 이용하였다. 화성은 중간에 D Minor Scale의 Bb/A가 사용되어서 Modal InterChange기법도 나타나고 있다. B부분에서는 G/A, F/G의 Constant Structure가 나오고 있다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1998.11a
• /
• pp.133-136
• /
• 1998

The scanning Maxwell-stress microscopy (SMM) is a dynamic noncontact electric force microscopy that allows simultaneous access to the electrical properties of molecular system such as surface potential, surface charge, dielectric constant and conductivity along with the topography. Here we report our recent results of its application to nanoscopic study of domain structures and electrical functionality in organic thin films prepared by the Langmuir-Blodgett technique.

• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.769-774
• /
• 2010

KTX Introduced in korea have occurred enhanced services and reduced regional travel time. "Induced traffic" is defined in the traffic demand generated in new project. 'Induced traffic' compared to the Diversion Demand Survey and research on ways to quantify the situation, insufficient analysis of constant and long-term observations are needed to estimate the changes in demand. In this study, Induced traffic effects due to the opening of KTX for analysis survey to passengers by Railway and the scale factor induced traffic review.

• Journal of the Korean Data and Information Science Society
• /
• v.10 no.1
• /
• pp.193-198
• /
• 1999

The estimation of parameters in regression models with multiplicative errors is usually based on the gamma or log-normal likelihoods. Under reciprocal misspecification, we compare the small sample efficiencies of two sets of estimators via a Monte Carlo study. We further consider the case where the errors are a random sample from a Weibull distribution. We compute the asymptotic relative efficiency of quasi-likelihood estimators on the original scale to least squares estimators on the log-transformed scale and perform a Monte Carlo study to compare the small sample performances of quasi-likelihood and least squares estimators.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.8 no.5 s.39
• /
• pp.35-43
• /
• 2004

Small-scale models have been frequently used for seismic performance tests because of limited testing facilities and economic reasons. However, there are not enough studies on similitude law for analogizing prototype structures accurately with small-scale models, although conventional similitude law based on geometry is not well consistent in the inelastic seismic behavior. When fabricating prototype and small-scale model of reinforced concrete structures by using the same material, added mass is demanded from a volumetric change and scale factor could be limited due to aggregate size. Therefore, it is desirable that different material is used for small-scale models. Thus, a modified similitude law could be derived depending on geometric scale factor, equivalent modulus ratio and ultimate strain ratio. In this study, compressive strength tests are conducted to analyze the equivalent modulus ratio of micro-concrete to normal-concrete. Then, equivalent modulus ratios are divided into multi-phase damage levels, which are basically dependent on ultimate strain level. Therefore, an algorithm adaptable to the pseudodynamic test, considering equivalent multi-phase similitude law based on seismic damage levels, is developed. Test specimens, consisted of prototype structures and 1/5 scaled models as a reinforced concrete column, were designed and fabricated based on the equivalent modulus ratios already defined. Finally quasistatic and pseudodynamic tests on the specimens are carried out using constant and variable modulus ratios, and correlation between prototype and small-scale model is investigated based on their test results. It is confirmed that the equivalent multi-phase similitude law proposed in this study could be suitable for seismic performance tests on small-scale models.

• Journal of the Korean Society of Combustion
• /
• v.21 no.4
• /
• pp.6-15
• /
• 2016

The oxygen fuel MILD (Moderate or Intense Low-oxygen Dilution) combustion has been considered as one of the promising combustion technology for flame stability, high thermal efficiency, low emissions and improved productivity. In this paper, the effect of oxygen and fuel injection condition on formation of MILD combustion was analyzed using lab scale oxygen fuel MILD combustion furnace. The results show that the flame mode was changed from a diffusion flame mode to a split flame mode via a MILD combustion flame mode with increasing the oxygen flow rate. A high degree of temperature uniformity was achieved using optimized combination of fuel and oxygen injection configuration without the need for external oxygen preheating. In particular, the MILD combustion flame was found to be very stable and constant flame temperature region at 7 KW heating rate and oxygen flow rate 75-80 l/min.