• Journal of Microbiology and Biotechnology
• /
• 제15권1호
• /
• pp.1-6
• /
• 2005

Optimal criterion for the scale-up production of schizophyllan, a fungal polysaccharide secreted by Schizophyllum commune, was investigated. For the production of the polysaccharide in a 150-l bioreactor, the culture conditions optimized in a 15-l bioreactor were applied to a 150-l bioreactor with scale-up process, by changing impeller speed and airflow rate. The optimized impeller speed in the 15-l bioreactor was 50 rpm in a technical medium based on barley. For establishment of the scale-up process, 3 kinds of criteria were used while the gas throughput number was kept constant, as follows; constant volume-related power input, constant tip speed of stirrer, and constant Reynolds number. In the 150-l bioreactor, the highest values for the maximum specific growth rate (1.17/day) and productivity (0.63 g/L${\cdot}$day) were achieved in the culture condition from constant volumerelated power input criterion.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 추계학술대회 논문집 학회본부
• /
• pp.253-256
• /
• 1997

This paper describes a novel design method for compensating field time-constant of micro-synchronous machine so that its terminal flux can show the same characteristics as large-scale synchronous machine's. In addition to it, the suggested design method can determine the field time-constant regulator's parameters considered the nonlinearities of micro-synchronous machine such as saturation and loading effect. This method applied to 5kVA micro-synchronous machine, and the digital time-constant regulator with digital AVR were designed such that the short field time-constant, $T_{do}'=1.12\;sec$, can take on the large-scale synchronous machine time constant, $T_{do}'=1.47\;sec$. After determining the parameters of controllers, the real time digital time-constant regulator and digital AVR algorithm were implemented by using the PC with Penumum processor, and the usefulness of suggested real time digital time-constant regulator was verified by observing its good performance on the excitation of micro-synchronous machine.

• 천문학논총
• /
• 제30권2호
• /
• pp.371-374
• /
• 2015

Classical Cepheids (hereafter Cepheids) belong to a class of important variable stars that can be used to determine distances to nearby galaxies via the famous period-luminosity (PL) relations, i.e. the Leavitt Law. In turn, these distances can then be used to calibrate a host of secondary distance indicators located well within the Hubble flow, and ultimately determine the Hubble constant in a manner independent of the Cosmic Microwave Background (CMB) measurements. Some recent progress in determining the Hubble constant to within ~ 3% level via the Cepheid-based distance scale ladder (the SH0ES and the Carnegie Hubble Program) were first summarized in this Proceeding, followed by a brief discussion on the prospect of using ultra-long period Cepheids (ULPC) in future distance scale work. ULPC are those Cepheids with periods longer than 80 days, which seem to follow a different PL relation than their shorter period Cepheids. It has been suggested that ULPC can be used to determine the Hubble constant in "one-step". However, based on the two ULPCs found in M31, it was found that the large dispersion in derived distance moduli leads to a less accurate distance modulus to M31 compared to the classical Cepheids. This finding might raise an alert regarding the use of ULPCs in future distance scale work.

• Journal of Astronomy and Space Sciences
• /
• 제20권3호
• /
• pp.163-174
• /
• 2003

The motion of 3C 120 Jet relative to the core is reasonably uniform and the VLBI scale jet connects outwards to a VLA ~ 100kpc scale. We measured the jet width variation from the center and found some indication of a power law which indicates the jet expands roughly with a constant opening angle and a constant flow velocity, $V_{f}{\cong}c$, from subparsec scales to ~ 100 kpc. With such a constant flow velocity and based on other physical parameters deduced from observed emission characteristics of the jet, we have established an equipartition jet model which might accommodate the basic parameters of the jet on subparsec scales, with which one can fit the radio intensities over all the scale of the jet even to ~100 kpc.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.215-218
• /
• 2003

Nano-scale experiments for adhesion force and friction force were performed with AFM/FFM. In macro-scale, the friction coefficient is constant without relating to the change of contact area. However, many papers have indicated that in nano-scale, the friction coefficient is related to the contact area. Contact area would increase with the normal force. Therefore, in this study, we analyzed the trend of the friction coefficient of Si(100) and Mica according to the normal force and then. the contact area was calculated by JKR-theory. Results showed the friction coefficient was constant under 180 nm$^2$ contact area and over 180 nm$^2$ contact area, it was degraded. Moreover. the friction coefficient was constant according to the adhesion force.

• 한국유체기계학회 논문집
• /
• 제20권1호
• /
• pp.48-52
• /
• 2017

Small-scale motor-generator sets have been used in laboratories for verification of real large wind turbines whose rated power are more than 1 MW. In this paper, a result of designing a small-scale motor-generator system, which is composed of motor, gear box, flywheel, and generator, is presented in the aspect of speed response. Design objective is to make a small-scale motor-generator system have the same time constant and optimal tip speed ratio region as a real MW wind turbine. A small-scale 3.5 kW motor-generator system for emulating response of a 2 MW wind turbine is considered and designed.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2006년도 학술발표회 논문집
• /
• pp.545-552
• /
• 2006

Small-scale models have been frequently used for seismic performance tests because of limited testing facilities and economic reasons. However, there are not also enough studies on similitude law for analogizing prototype structures accurately with small-scale models, although conventional similitude law based on geometry similitude is not well consistent in their inelastic seismic behaviors. When fabricating prototype and small-scale model of reinforced concrete structures by using the same material, added mass is demanded from a volumetric change and scale factor could be limited due to aggregate size. Therefore, it is desirable to use different materials for small-scale model. In our recent study, a modified similitude law was derived depending on geometric scale factor, equivalent modulus ratio and ultimate strain ratio. And quasi-static and pseudo-dynamic tests on the specimens are carried out using constant and variable modulus ratios, and correlation between prototype and small-scale model is investigated based on their test results. In this study, tests on scaled model of different concrete compressive strength aye carried out. In shaking table tests, added mass can not be varied. Thus, constant added mass on expected maximum displacement was applied and the validity was verified in shaking table tests. And shaking table tests on non-artificial mass model is carried out to settle a limitation of acceleration and the validity was verified in shanking table tests.

• Journal of Microbiology and Biotechnology
• /
• 제16권12호
• /
• pp.1890-1896
• /
• 2006

Lumostatic operation for cultivation of Haematococcus pluvialis was assessed to test the scale-up strategy of photobioreactors. Lumostatic operation is a method of maintaining a proper light condition based on the specific light uptake rate ($q_e$), by cells. Lumostatic operations were performed in 0.4-, 2-, 10-, and 30-1 scale bubble column photobioreactors and the results were compared with cultures illuminated with constant light intensity. Significant differences were observed in the maximal cell concentrations obtained from 0.4-, 2-, 10-, and 30-1 scale photobioreactors under constant light intensity, yielding the maximal cell concentrations of $2.8{\times}10^5$, $2.2\times10^5$, $1.5\times10^5$, and $1.1\times10^5$ cells/ml, respectively. The maximal cell concentration in a 0.4-1 photobioreactor under lumostatic operation was $4.3\times10^5$ cells/ml. Furthermore, those in 2-, 10-, and 30-1 scale photobioreactors were about the same as that in the 0.4-1 photobioreactor. The results suggest that lumostatic operation with proper $q_e$ is a good strategy for increasing the cell growth of Haematococcus pluvialis compared with a constant supply of light energy. Therefore, lumostatic operation is not only an efficient way to achieve high cell density cultures with minimal power consumption in microalgal cultures but it is also a perfect parameter for the scale-up of photobioreactors.

• 한국전기전자재료학회논문지
• /
• 제34권2호
• /
• pp.142-147
• /
• 2021

We present a subthreshold swing model for a symmetric junctionless double gate MOSFET. The scale length λ1 required to obtain the potential distribution using the Poisson's equation is a criterion for analyzing the short channel effect by an analytical model. In general, if the channel length Lg satisfies Lg > 1.5λ1, it is known that the analytical model can be sufficiently used to analyze short channel effects. The scale length varies depending on the channel and oxide thickness as well as the dielectric constant of the channel and the oxide film. In this paper, we obtain the scale length for a constant permittivity (silicon and silicon dioxide), and derive the relationship between the scale length and the channel length satisfying the error range within 5%, compared with a numerical method. As a result, when the thickness of the oxide film is reduced to 1 nm, even in the case of Lg < λ1, the analytical subthreshold swing model proposed in this paper is observed to satisfy the error range of 5%. However, if the oxide thickness is increased to 3 nm and the channel thickness decreased to 6 nm, the analytical model can be used only for the channel length of Lg > 1.8λ1.

• 대한수학회보
• /
• 제49권6호
• /
• pp.1131-1145
• /
• 2012

The purpose of this paper is to use an appropriate variational framework to discuss the boundary value problem with p-Laplacian type operators $$\{({\alpha}(t,x^{\Delta}(t)))^{\Delta}-a(t){\phi}_p(x^{\sigma}(t))+f({\sigma}(t),x^{\sigma}(t))=0,\;{\Delta}-a.e.\;t{\in}I\\x^{\sigma}(0)=0,\\{\beta}_1x^{\sigma}(1)+{\beta}_2x^{\Delta}({\sigma}(1))=0,$$ where ${\beta}_1$, ${\beta}_2$ > 0, $I=[0,1]^{k^2}$, ${\alpha}({\cdot},x({\cdot}))$ is an operator of $p$-Laplacian type, $\mathbb{T}$ is a time scale. Some sufficient conditions for the existence of constant-sign solutions are obtained.