• 한국지역사회생활과학회지
• /
• 제26권3호
• /
• pp.499-509
• /
• 2015

Efforts to have children consume milk continue across the world for the sufficient supply of calcium and protein. This study examines the frequency and amount of dairy milk and the recognition, acceptability, and knowledge of milk and dairy products by considering fifth- and sixth-graders in Hwaseong, Korea. The acceptability of milk and dairy products measured based on a five-point Likert-type scale was assessed to determine its correlations with breakfast frequency, the frequency of milk intake, and milk knowledge. According to descriptive statistics, 47% and 53% of the subjects were fifth- and sixth-graders, respectively, 53% and 47% were male and female, respectively, 45.3% and 51.2% had mothers in their thirties and forties, respectively, and 57% had working mothers. Breakfast frequency was 5.2 and 5.3 times per week, and milk and dairy intake was 4.6 times. The milk knowledge score was 5.3 out of 10 points. The average daily intake of milk was a cup (55.1%), and a vast majority preferred white milk (68.6%). Ice cream bar type (4.49 points) and cone type (4.48 points) showed the highest acceptability, and breakfast frequency was positively correlated with white milk and cheddar cheese (p<0.01). Daily milk intake frequency was positively correlated with white milk and fortified milk. Milk knowledge was positively correlation with white milk, fortified milk, functional yogurt (p <0.05), fermented milk, and cheese (p<0.01). The higher the breakfast frequency, the more likely the intake of white milk (p<0.01). An increase in milk intake increased milk knowledge (p<0.05). The higher the level of knowledge, the more likely the intake of fortified milk and the frequency of milk intake. These results suggest that school lunch milk may increase awareness and milk intake through continuing education in milk knowledge. High acceptability scores for white milk, fortified milk, and fermented milk indicate their suitability for school milk consumption.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2011년도 추계학술대회 초록집
• /
• pp.122.2-122.2
• /
• 2011

Sulfur hexafluoride ($SF_6$), one of the most potent greenhouse gases, is known as a hydrate former and has been studied at the high pressure up to 1.3 GPa with gas mixtures and with aqueous surfactant. Since we regard $SF_6$ as a potential promoter molecule that can stabilize hydrate structure more effectively compare to the other promoters, further investigation is required to verify the stabilizing ability of $SF_6$ in the hydrate structure. However, the insoluble nature of $SF_6$ in water or gases hinders fine scale analyses. This work discusses the data obtained by using molecular dynamics simulations of structure II (sII) clathrate hydrates containing $SF_6$ and $H_2$. The simulations were performed using the TIP4P/Ice model for water molecule and a previously reported $SF_6$ molecular model (optimized at the pure $SF_6$ single phase system (Olivet and Vega, 2007)), and a $H_2$ molecular model (adapted from the THF+$H_2$ hydrate system (Alavi et al., 2006)). The simulations are performed to observe the stability of $SF_6$ and $H_2$ in the sII clathrate hydrate system with varying temperature and pressure conditions and occupancies of $SF_6$ and $H_2$, which cannot be easily tuned experimentally. We observe that stability of H2 enclathrated in the hydrate structure more affected by the occupancy of $SF_6$ molecules and temperature than pressure, which ranges from 1 to 100 bar.

• Nuclear Engineering and Technology
• /
• 제48권4호
• /
• pp.859-869
• /
• 2016

Component-scale modeling of boiling is predominantly based on the Eulerian-Eulerian two-fluid approach. Within this framework, wall boiling is accounted for via the Rensselaer Polytechnic Institute (RPI) model and, within this model, the bubble is characterized using three main parameters: departure diameter (D), nucleation site density (N), and departure frequency (f). Typically, the magnitudes of these three parameters are obtained from empirical correlations. However, in recent years, efforts have been directed toward mechanistic modeling of the boiling process. Of the three parameters mentioned above, the departure diameter (D) is least affected by the intrinsic uncertainties of the nucleate boiling process. This feature, along with its prominence within the RPI boiling model, has made it the primary candidate for mechanistic modeling ventures. Mechanistic modeling of D is mostly carried out through solving of force balance equations on the bubble. Forces incorporated in these equations are formulated as functions of the radius of the bubble and have been developed for, and applied to, low-pressure conditions only. Conversely, for high-pressure conditions, no mechanistic information is available regarding the growth rates of bubbles and the forces acting on them. In this study, we use direct numerical simulation coupled with an interface tracking method to simulate bubble growth under high (up to 45 bar) pressure, to obtain the kind of mechanistic information required for an RPI-type approach. In this study, we compare the resulting bubble growth rate curves with predictions made with existing experimental data.

• 콘크리트학회논문집
• /
• 제15권3호
• /
• pp.417-424
• /
• 2003

철근콘크리트 기둥-철골보(RCS)합성골조 접합부에서 지압 거동을 평가하고 지압설계를 위하여 단순화한 국부지압 실험을 수행하였다. 편심하중에 의해 국부지압을 받을 때 콘크리트의 쐐기작용과 띠철근의 횡구속 효과에 의해 저항된다. 실험결과 U형 지압보강근은 지압내력을 철근 강도만큼 증가시키면서 상세와 설치가 단순하여 효과적으로 나타났다. 띠철근 양에 따라 지압강도가 증가하며 이중 띠철근이 더욱 효과적으로 약20% 증가된다. 현행 ASCE설계지침에서 띠철근 규정은 지압내력이 2 $f_{ck}$ 가 되기 위해서는 다소 미흡하며, 지압강도는 띠철근과 이중 띠철근을 증가시킴에 따라 최대한 2.5 $f_{ck}$ 까지 사용할 수 있다. 본 연구의 결과로서 RCS 보기둥 접합부의 지압내력 추정을 위한 예측식이 제안되었으며 실험결과와 비교적 잘 일치되고 있다.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제37권4호
• /
• pp.255-263
• /
• 2011

Introduction: Maxillomandibular fixation (MMF) is essential before surgery under general anesthesia in maxillofacial trauma patients. MMF is used basically to reconstruct the occlusion and occlusal stability to recover the facial shape and oral functions. The arch bar and wire is a traditional method for MMF, but it can not only bring pressure to the periodontal ligaments and teeth but also cause a penetrating injury to the surgeons. Materials and Methods: In this study, 198 patients with an open reduction using a manual reduction without MMF from September 2005 to May 2010 in Dankook University Dental Hospital were subjected to a follow-up evaluation during the postoperative 4 months periods. This study evaluated the incidence of complications according to the condition of the patient (gender, age), the state of bony union of the fracture sites and a numeric rating scale evaluation for postoperative pain scoring. Results: 1. The complications were classified into major and minor according to the seriousness, and the major complication rate was as low as 2.02%. Only 2 cases of re-operations (1.01%) were encountered. In the classification according to the fracture line, plate fracture was observed in both cases of mandibular symphysis fracture, and angle fractures and loosening of two screws were noted in the case of mandibular angle fracture. 2. The complication rate was similar regardless of gender and age. 3. The degree of bony union was satisfactory, and the complication rate was reduced as the bony union improved. 4. More patients complained of pain as the operation time was increased. Conclusion: The use of MMF is not always necessary if a skilled assistant is provided to help manually reduce the fracture site. Compared to other studies of mandibular fracture surgery using MMF, the complication rate was similar using only manual reduction and the patients' discomfort was reduced without MMF.

• 한국전자통신학회논문지
• /
• 제8권11호
• /
• pp.1733-1740
• /
• 2013

교육에서 중요한 요소는 신뢰성 있는 교육의 질을 확보하는 문제이다. 교육의 질을 확보하는 기준에는 다양한 방법들이 있다. 노동부의 계좌제교육, 보건의료종사자의 보수교육에서의 질 관리는 출석관리가 중요한 평가기준이기 때문에 신뢰성 높은 출석관리가 요구된다. 노동부에서 교육생의 출석 신뢰도를 높이기 위해서 최근에 신용카드형태의 출석체크 시스템을 도입하였다. 이에 비해 보건의료종사자의 보수교육은 형식적으로 이루어지는 출석관리로 교육의 질 문제가 제기되어왔다. 최근 개발된 USN기반의 출석관리시스템들은 효과는 있지만 적은규모의 교육이 다수의 지역에서 동시에 진행되는 경우에 관리자 측면에서는 비용적인 문제와 이동성 문제 그리고 시스템 운용의 문제 그리고 교육생의 출석관리의 신뢰도 문제가 해결해야 할 과제로 남게 되었다. 이러한 요구를 해결하기 위해서 본 연구는 바코드와 PC카메라 기반의 저비용 출석관리시스템을 설계 및 구현하였다. 개발된 시스템을 실제 보수교육현장에서 테스트를 실시한 결과 관리자 측면에서는 98%만족도를 보였고 교육생 측면에서도 95%의 만족도를 보였다.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2005년도 춘계종합학술대회
• /
• pp.1141-1144
• /
• 2005

본 논문에서는 구조물의 안전성을 목적으로 변위를 감시하는 자동화된 시스템을 제안한다. 사진측량 기법은 서로 다른 각도에서 촬영된 2차원 이미지로부터 대상물의 정밀한 3차원 형상을 얻어내는 기법으로써 구조물의 변형을 분석하기에 매우 정확하면서도 편리하다. 본 논문은 카메라보정, 표정점(coded target)을 이용한 특징점의 획득, 획득된 특징점의 3차원 복원 및 정확도 분석의 과정으로 구성된다. 논문에서 사용되는 다시점 카메라 각각의 카메라는 일정한 거리와 시차로 배치하였다. 카메라 보정은 다시점 카메라로부터 획득된 3장의 영상에서 7개 이상의 대응점들로부터 트라이포컬텐서를 구하고 이로부터 유클리드 카메라를 구하는 자기교정(self-calibration) 방법을 사용하였다. 특히 특징점 획득 과정에서, 정확한 좌표를 구하기 위하여 외곽형상으로부터 중심점의 좌표를 정확하게 계산해내는 서브픽셀 기법을 사용하고 패턴 인식 기법을 이용하여 특징점을 자동으로 검출하였으며, 실세계 좌표상에서의 실측값을 구하기 위하여 스케일 바를 사용한다.

• 환경영향평가
• /
• 제11권1호
• /
• pp.51-66
• /
• 2002

The purpose of this study is to analyze the geomorphological environment changes of tidal flat in the Cheonsu Bay. Especially, it centers on the changes in the sedimentary environment using remote sensing data. Multi-temporal Landsat data and topographic maps were used in this study. The results are summarized as follows: the tidal flat of Cheonsu Bay changes in many ways depending on the direction of the tidal current. In the neighborhood of Ganwoldo, the scale of the tidal flat has continuously been expanded due to the superiority of sedimentation after a tide embankment was built. When we analyzed the grain size of sediments and implemented in-situ field survey, it was found that the innermost part of the bay consists of a mud flat, with the midway part mixed flat, and the nearest part to the sea sand flat. On the other hand, in the neighborhood of Seomot isle and its beach, sedimentation is superior in the eastern part whereas erosion is superior in the western part. In other words, the western coast of the beach is contacted with the open seas and under much influence of ocean wave. The eastern coast is placed at the entrance of the bay and has sand bar and tidal flat developed due to submarine deposits that are accumulated on the sea floor by the tidal current. In conclusions, remote sensing methods can be effectively applied for quantitative analysis of geomorphological changes in tidal flat, and it is expected that the proposed schemes can be applied to another geomorphological environments such as beach, sand dune, and sand wave.

• 한국염색가공학회지
• /
• 제29권2호
• /
• pp.86-96
• /
• 2017

To make uniform pressure distributed over the contact surface was necessary to cold pad batch dyeing machine. In this study, to confirm characteristic of flexibility and the contact pressure distribution through experimental analysis of padder roll were controlled by hydraulic cell. When there were no load pressure only inner pressure, the value of displacement in the center of padder were greater than the end of the padder. The results of this study showed that the padder had the optimum value of inner pressure for uniform contact pressure distribution. Measuring the contact pressure in a padder system were driven by using a pre-scale film. Uniform contact pressure distribution of cell padder were a linearly with load pressure and inner pressure. When the load pressure was less than 8 tons, the inner pressure for the uniform contact pressure was 1~4 bar. The padder roll performance curves proposed in this study were available for practical production environments and various roll designs.

• Journal of Electrical Engineering and Technology
• /
• 제9권5호
• /
• pp.1511-1519
• /
• 2014

The objective of this paper is to propose a modelling of a small compressed air energy storage system, which drives an induction generator based on a field-oriented control (FOC) principle for a renewable power generation. The proposed system is a hybrid technology of energy storage and electrification, which is developed to use as a small scale of renewable energy power plant. The energy will be transferred from the renewable energy resource to the compressed air energy by reciprocating air compressor to be stored in a pressurized vessel. The energy storage system uses a small compressed air energy storage system, developed as a small unit and installed above ground to avoid site limitation as same as the conventional CAES does. Therefore, it is suitable to be placed at any location. The system is operated in low pressure not more than 15 bar, so, it easy to available component in country and inexpensive. The power generation uses a variable speed induction generator (IG). The relationship of pressure and air flow of the compressed air, which varies continuously during the discharge of compressed air to drive the generator, is considered as a control command. As a result, the generator generates power in wide speed range. Unlike the conventional CAES that used gas turbine, this system does not have any combustion units. Thus, the system does not burn fuel and exhaust pollution. This paper expresses the modelling, thermodynamic analysis simulation and experiment to obtain the characteristic and performance of a new concept of a small compressed air energy storage power plant, which can be helpful in system designing of renewable energy electrification. The system was tested under a range of expansion pressure ratios in order to determine its characteristics and performance. The efficiency of expansion air of 49.34% is calculated, while the efficiency of generator of 60.85% is examined. The overall efficiency of system of approximately 30% is also investigated.