• JSTS:Journal of Semiconductor Technology and Science
• /
• v.2 no.2
• /
• pp.132-140
• /
• 2002

This paper presents an ARM-based SOC bus transaction verification IP and the usage experiences in SOC designs. The verification IP is an AMBA AHB protocol checker, which captures legal AHB transactions in FSM-style signal sequence checking routines. This checker can be considered as a reusable verification IP since it does not change unless the bus protocol changes. Our AHB protocol checker is designed to be scalable to any number of AHB masters and reusable for various AMBA-based SOC designs. The keys to the scalability and the reusability are Object-Oriented Programming (OOP), virtual port, and bind operation. This paper describes how OOP, virtual port, and bind features are used to implement AHB protocol checker. Using the AHB protocol checker, an AHB simulation monitor is constructed. The monitor checks the legal bus arbitration and detects the first cycle of an AHB transaction. Then it calls AHB protocol checker to check the expected AHB signal sequences. We integrate the AHB bus monitor into Verilog simulation environment to replace time-consuming visual waveform inspection, and it allows us to find design bugs quickly. This paper also discusses AMBA AHB bus transaction coverage metrics and AHB transaction coverage analysis. Test programs for five AHB masters of an SOC, four channel DMAs and a host interface unit are executed and transaction coverage for DMA verification is collected during simulation. These coverage results can be used to determine the weak point of test programs in terms of the number of bus transactions occurred and guide to improve the quality of the test programs. Also, the coverage results can be used to obtain bus utilization statistics since the bus cycles occupied by each AHB master can be obtained.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.13 no.6
• /
• pp.23-28
• /
• 2013

Because characteristics of diversity, large-scale and unpredictability of disaster are very difficult to make predict of disaster, rapid disaster response activity is important to reduce damage from disaster. Therefore emergency communication technology is essential to information sharing between field personnel in the field. Because the heterogeneous radios defined as some of 100MHz VHF, 400MHz UHF, and 800MHz emergency communication RF band are used in Korea, the field personnels need to have multiple radios. In order to use one radio per personnel, radio voice intercommunication is very necessary. We study on modular 3-Band RF to communicate between heterogeneous radios through single multi-band antenna and verify scalable of the number of equipped radios.

• Journal of Communications and Networks
• /
• v.16 no.3
• /
• pp.335-343
• /
• 2014

This paper considers the crucial problem of deploying wireless relays for achieving a connected wireless sensor network in indoor environments, an important aspect related to the management of the sensor network. Several algorithms have been proposed for ensuring full sensing coverage and network connectivity. These algorithms are not applicable to indoor environments because of the complexity of indoor environments, in which a radio signal can be dramatically degraded by obstacles such as walls. We first prove theoretically that the indoor relay placement problem is NP-hard. We then predict the radio coverage of a given relay deployment in indoor environments. We consider two practical scenarios; wire-connected relays and radio-connected relays. For the network with wire-connected relays, we propose an efficient greedy algorithm to compute the deployment locations of relays for achieving the required coverage percentage. This algorithm is proved to provide a $H_n$ factor approximation to the theoretical optimum, where $H_n=1+{\frac{1}{2}}+{\cdots}+{\frac{1}{n}}={\ln}(n)+1$, and n is the number of all grid points. In the network with radio-connected relays, relays have to be connected in an ad hoc mode. We then propose an algorithm based on the previous algorithm for ensuring the connectivity of relays. Experimental results demonstrate that the proposed algorithms achieve better performance than baseline algorithms.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.11
• /
• pp.35-44
• /
• 2005

In Mobile IP protocol, because a mobile node still uses its home IP address even though it moves to foreign network from home network, authentication among mobile node, foreign network and home network is critical issue. Many researches about this issue have been based on shared secret, for example mobile node and home agent authenticate each other with pre-shared symmetry key. And they missed several security issues such as replay attack. Although public key scheme could be applied to this issue easily, since the public key cryptography is computationally complicated, it still has the problem that it is not practical to realistic environment. In this paper, we describe several security issues in Mobile IP protocol. And we propose new Mobile IP authentication protocol that is applicable to realistic environment using public key algorithm based on certificate. It has scalability for mobile nodes and is applicable to the original Mobile IP protocol without any change. Finally we prove security of the proposed protocol and that it might not affect performance of the original Mobile IP protocol.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.2
• /
• pp.95-103
• /
• 2007

Dynamic voltage scaling (DVS) is a well-known and effective power management technique. While there has been research on slack distribution, voltage allocation and other aspects of DVS, its effects on non-voltage-scalable devices has hardly been considered. A DC-DC converter plays an important role in voltage generation and regulation in most embedded systems, and is an essential component in DVS-enabled systems that scale supply voltage dynamically. We introduce a power consumption model of DC-DC converters and analyze the energy consumption of the system including the DC-DC converter. We propose an energy-optimal off-line DVS scheduling algorithm for systems with DC-DC converters, and show experimentally that our algorithm outperforms existing DVS algorithms in terms of energy consumption.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.35C no.11
• /
• pp.39-47
• /
• 1998

This paper describes high-speed pipelined memory architecture for a shared buffer ATM switch. The memory architecture provides high speed and scalability. It eliminates the restriction of memory cycle time in a shared buffer ATM switch. It provides versatile performance in a shared buffer ATM switch using its scalability. It consists of a 2-D array configuration of small memory banks. Increasing the array configuration enlarges the entire memory capacity. Maximum cycle time of the designed pipelined memory is 4 ns with 5 V V$\_$dd/ and 25$^{\circ}C$. It is embedded in the prototype chip of a shared scalable buffer ATM switch with 4 x 4 configuration of 4160-bit SRAM memory banks. It is integrated in 0.6 $\mu\textrm{m}$ 2-metal 1-poly CMOS technology.

• Smart Structures and Systems
• /
• v.18 no.5
• /
• pp.885-909
• /
• 2016

Advances in low-cost wireless sensing have made instrumentation of large civil infrastructure systems with dense arrays of wireless sensors possible. A critical issue with regard to effective use of the information harvested from these sensors is synchronized sensing. Although a number of synchronization methods have been developed, most provide only clock synchronization. Synchronized sensing requires not only clock synchronization among wireless nodes, but also synchronization of the data. Existing synchronization protocols are generally limited to networks of modest size in which all sensor nodes are within a limited distance from a central base station. The scale of civil infrastructure is often too large to be covered by a single wireless sensor network. Multiple independent networks have been installed, and post-facto synchronization schemes have been developed and applied with some success. In this paper, we present a new approach to achieving synchronized sensing among multiple networks using the Pulse-Per-Second signals from low-cost GPS receivers. The method is implemented and verified on the Imote2 sensor platform using TinyOS to achieve $50{\mu}s$ synchronization accuracy of the measured data for multiple networks. These results demonstrate that the proposed approach is highly-scalable, realizing precise synchronized sensing that is necessary for effective structural health monitoring.

• Journal of KIISE:Computing Practices and Letters
• /
• v.14 no.5
• /
• pp.517-521
• /
• 2008

A worm is a malware that propagates quickly from host to host without any human intervention. Need of early worm detection has changed research paradigm from signature based worm detection to the behavioral based detection. To increase effectiveness of proposed solution, in this paper we present mechanism of detection and prevention of worm in distributed fashion. Furthermore, to minimize the worm destruction; upon worm detection we propagate the possible attack aleγt to neighboring nodes in secure and organized manner. Considering worm behavior, our proposed mechanism detects worm cycles and infection chains to detect the sudden change in network performance. And our model neither needs to maintain a huge database of signatures nor needs to have too much computing power, that is why it is very light and simple. So, our proposed scheme is suitable for the ubiquitous environment. Simulation results illustrate better detection and prevention which leads to the reduction of infection rate.

• Journal of KIISE:Databases
• /
• v.29 no.3
• /
• pp.217-229
• /
• 2002

Regular path expressions are primary elements for formulating queries over the semistructured data that does not assume the conventional schemas. In addition, the query pruning is an important optimization technique to avoid useless traversals in evaluating regular path expressions. However, the existing query pruning often fails to fully optimize multiple regular path expressions, and the previous methods that post-process the result of the existing query pruning must check exponential combinations of sub-results. In this paper, we present a new query pruning technique that consists of the preprocessing phase and the pruning phase. Our two-phase query pruning is affective in optimizing multiple regular path expressions, and is more scalable than the previous methods in that it never check the exponential combinations of sub-results.

• Journal of KIISE
• /
• v.42 no.4
• /
• pp.541-549
• /
• 2015

A large volume of continuously growing BGP data files can raise two technical challenges regarding scalability and manageability. Due to the recent development of the open-source distributed computing infrastructure, Hadoop, it becomes feasible to handle a large amount of data in a scalable manner. In this paper, we present a new Hadoop-based BGP tool (BGPdoop) that provides the scale-out performance as well as the extensible and agile analysis capability. In particular, BGPdoop realizes a query-based BGP record exploration function using Hive on the partitioned BGP data structure, which enables flexible and versatile analytics of BGP archive files. From the experiments for the scalability with a Hadoop cluster of 20 nodes, we demonstrate that BGPdoop achieves 5 times higher performance and the user-defined analysis capability by expressing diverse BGP routing analytics in Hive queries.