• Biomolecules & Therapeutics
• /
• v.24 no.4
• /
• pp.380-386
• /
• 2016

Silymarin from milk thistle (Silybum marianum) has been reported to show an anti-cancer activity. In previous study, we reported that silymarin induces cyclin D1 proteasomal degradation through NF-${\kappa}B$-mediated threonine-286 phosphorylation. However, mechanism for the inhibition of Wnt signaling by silymarin still remains unanswered. Thus, we investigated whether silymarin affects Wnt signaling in human colorectal cancer cells to elucidate the additional anti-cancer mechanism of silymarin. Transient transfection with a TOP and FOP FLASH luciferase construct indicated that silymarin suppressed the transcriptional activity of ${\beta}$-catenin/TCF. Silymarin treatment resulted in a decrease of intracellular ${\beta}$-catenin protein but not mRNA. The inhibition of proteasome by MG132 and $GSK3{\beta}$ inhibition by SB216763 blocked silymarin-mediated downregulation of ${\beta}$-catenin. In addition, silymarin increased phosphorylation of ${\beta}$-catenin and a point mutation of S33Y attenuated silymarin-mediated ${\beta}$-catenin downregulation. In addition, silymarin decreased TCF4 and increased Axin expression in both protein and mRNA level. From these results, we suggest that silymarin-mediated downregulation of ${\beta}$-catenin and TCF4 may result in the inhibition of Wnt signaling in human colorectal cancer cells.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1991.10a
• /
• pp.68-72
• /
• 1991

In this study, to improve temperature stability 0.05 Pb(Sn$\_$$\frac{1}{2}$/Sb$\_$$\frac{1}{2}$/O$_3$ - 0.35PbTiO$_3$ - 0.60PbZrO$_3$ + 0.4[wt%]MnO$_2$ piezoelctric oeramics of low dielectric constant and large mechanical quality factor were manufactured with the addition of Cr$_2$O$_3$by Hot Press method. And the SAW delay line was fabricated and the propagation characteristics of SAW was investigated, and the SAW filter was fabricated on C4 added by 0.2[wt%] Cr$_2$O$_3$and its frequency characteristics was investigated. The specimen, whose propagation characteristics of surface acoustic wave were the best, was C4 added by 0.2[wt%] Cr$_2$O$_3$, and its electromechanical coupling factor(ks$^2$) was 3.11[%] and its temperature coefficient of the center frequency (C$\_$fo/) was -21.27[ppm/$^{\circ}C$]. The 31[MHz] SAW IF filter of C4 scarcely had diffraction phenomena and its group delay time was 1.4673 ${\pm}$40[ns] in the pass band, and the insertion loss was -24.419[dB] on no impedance matching.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.19 no.8
• /
• pp.707-711
• /
• 2006

ZnO was doped up to 0.3 wt% for improving the electrical properties of lead-free $[Li_{0.04}(Na_{0.44}Ko_{0.52})-(Nb_{0.86}\;Ta_{0.10}\;Sb_{0.04})]O_3$ piezoelectric ceramics. The ceramics were fabricated with the conventional sintering processes. Crystal structure of the samples was tetragonal phase regardless of ZnO amount. However, the piezoelectric properties were varied with the ZnO amount. The electro-mechanical coupling factor $(k_p)$ was with the ZnO amount up to 0.2 wt% but decreased with the further addition. the maximum value of $k_p$ was 0.475. Density, piezoelectric charge constant and relative dielectric constant was also showed maximum value at 0.2 wt%. The maximum values are $4.75g/cm^3$, 275 pC/N, 1403, respectively. In contrast, the mechanical quality factor $(Q_m)$ was not varied with increasing the ZnO addition up to 0.2 wt% but rapidly increased at 0.3 wt%.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.11a
• /
• pp.296-299
• /
• 2003

In this paper, $0.10Pb(Sb_{1/2}Sn_{1/2})O_3-0.25PbTiO_3-0.65PbZrO_3$ ceramics were fabricated by the mixed-oxide method. The sintering temperature and time were $1230^{\circ}C$ and 2[hr], respectively. The structural, dielectric and piezoelectric properties with addition of NiO were studied. The crystal structure of a specimen was rhombohedral. As a result of SEM, the average grain size were decreased with increasing the contents of NiO. But the grains of the specimens doped with 0.4wt% NiO were increased, due to deposits of excess NiO at grain boundaries in the liquid phase. Relative dielectric constant and dielectric loss of the specimen doped with 0.1wt% NiO were 701 and 0.026, respectively.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.11a
• /
• pp.329-331
• /
• 2003

In this paper, $0.10Pb(Sb_{1/2}Sn_{1/2})O_3-0.25PbTiO_3-0.65PbZrO_3$ ceramics were fabricated by the mixed-oxide method. The sintering temperature and time were $1230^{\circ}C$ and 2(hr), respectively. The structural, dielectric and pyroelectric properties with addition of $Y_2O_3$ were studied. The crystal structure of a specimen was rhombohedral. As a result of SEM, the average grain size were decreased with increasing the contents of $Y_2O_3$. Relative dielectric constant and dielectric loss of the specimen doped with 0.2wt% $Y_2O_3$ were 597 and 0.022, respectively. Remanent polarization and coercive field of the specimen doped with 0.4wt% $Y_2O_3$ were $8.5[{\mu}C/cm^2]$ and 10.2[kV/cm], respectively.

• Elastomers and Composites
• /
• v.16 no.4
• /
• pp.211-216
• /
• 1981

A series of conveyer rubber belts has been made by blending natural rubber(NR), styrene butadiene rubber(SBR), chloroprene rubber(CR) and additives on nylon cords, and their respective flammability has been investigated. It has been observed that: 1. By adding an antiflame agent to the belt, in addition to 70% chlorinated paraffine and antimony oxide($Sb_{2}O_{3}$), the inflammability is improved remarkably to O - 2 seconds due to the synergistic effect, while a sample without antiflame B fails to pass the KS M 6678 test. 2. Physical properties, such as tensile strength, elongation at break and adhesion strength, of the sample belts have been studies by varying ratios of NR/CR from 20 to 100, and it has been observed that the higher ratios have the better physical properties.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.348-348
• /
• 2010

Nanostructures have great potential in various devices due to the their promising electronic and optical properties. Nano-patterned the front surface of a solar cell generally results in improved performance, mostly due to an increase in the short-circuit current by the incident photons strike the cell surface at an angle. In this work, we investigate AFM-assisted nano-patterned field effect transistors (FETs) with vairous silicon oxide distance value D, from ${\sim}0.5{\mu}m$ to $1{\mu}m$. Also, we compared the electro-optical characteristics of the patterned FETs and the non-patterned FETs (reference device) based on both 2-dimensional simulation and experimental results for the wavelength from 100nm to 900nm. In addition, we report electric characteristics for illuminated surface in schottky barrier field effect transistors (SB-FETs).

• Ceramist
• /
• v.21 no.2
• /
• pp.29-37
• /
• 2018

In order to overcome the problems of existing low-dimensional materials (carbon nanotubes, graphene, transition metal dichalcogenides, etc) researches on new 1D materials have been studied. In the case of $LiMo_3Se_3$ and $Mo_6S_{9-x}I_x$, continuous researches have been carried out for 3D bulk synthesis and atomic scale dispersion. Recently, quantum confinement effect of $LiMo_3Se_3$ and bio-stability of $Mo_6S_{9-x}I_x$ have been proven and various applications have started to be studied. In addition, device application results using new 1D materials such as $Sb_2Se_3$ (optoelectronic devices using the property of effectively reducing exciton decay due to no dangling bond) and $VS_4$ (electrochemical energy storage using the space between 1-D nanostructures) have been reported very importantly. Therefore, it can be claimed that it has reached a very important time to find and synthesize new 1D materials and to report various characteristics not existing.

• Macromolecular Research
• /
• v.14 no.1
• /
• pp.107-113
• /
• 2006

Processible norbornene copolymers were realized by judiciously designing norbomene comonomers, which were themselves prepared by the Diels-Alder reaction of cyclopentadiene and benzoquinone followed by the isomerization and alkylation of alcohols. The norbornene copolymers containing these derivatized comonomers, prepared by [Pd($x_{2}CH-{3} $)$_{4}$][$SbF_{6}$]$_{2}$ catalyst, exhibited excellent solubility in many organic solvents as well as good thermal stability, as evidenced by their high glass transition ($T_{g}$) and decomposition ($\∼$350$^{circ}C$) temperatures. In addition, fairly strong adhesion to substrates such as glasses and silicon wafers was also achieved with these copolymers to overcome the limitations experienced by polynorbornene homopolymers and to make them attractive for many important industrial applications.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1992.05a
• /
• pp.73-76
• /
• 1992

In this study, piezoelectric ceramics of composition 0.08Pb(Mn$\sub$1/3/Sb$\sub$2/3/)O$_3$ were manufactured by the Hot-press method and structural, piezoelectrical properties and temperature stability were investigated with addition of 0, 02, 0.4, 0.6, 0.8, 1.0 [wt%] Cr$_2$O$_3$. Also the SAW delayline was fabricated and the propagation characteristics of SAW were considered with SAW theories.