• Journal of Institute of Control, Robotics and Systems
• /
• v.6 no.3
• /
• pp.241-247
• /
• 2000

The reference model of an MRC (model reference control) provides the desired trajectory a plant should follow and thus the design of a reference model has a significant effect on control performance. In most control systems control input to a plant has some bounds and it is preferable to make use of as large control inputs as possible within the range of no saturation. In this paper a new approach of selecting the reference model is proposed for bounded control inputs. Design variables of the reference model are determined in such a way that maximizes the performance index within the range of no saturation. Moreover this variable reference model is regularly updated during control. This scheme is verified by application to the servo motor position control system in various simulations. The responses of the MRC with a variable reference model show better tracking performance than that with a fixed reference mode. Moreover by adjusting the update interval of the reference model the control performance can be further improved.

• Journal of Korean Critical Care Nursing
• /
• v.3 no.1
• /
• pp.41-51
• /
• 2010

Purpose: The purpose of this study was to identify the effects of family visits upon the stress response of patients and their families, Methods: This study was the interrupted time series design, The subjects consisted of 197 patients and 197 family members in the cardiac intensive care unit of S Hospital in Bucheon. Physiological stress responses such as blood pressure, heart rates, respiration rates, and oxygen saturation were measured using HP monitors. VAS was used to measure the emotional stress. Collected data was analyzed using repeated measure ANOVA, t-test by SPSS 17.0 statistical program. Results: The family visits did not change patients' blood pressure, pulse rate, respiration rate and oxygen saturation, However the anxiety level of patients and their family members were decreased significantly during family visits. Furthermore, 30-minute family visit reduced more effectively patient's anxiety than 15-minute family visit. Conclusion: Family visits need to be used as a means of nursing intervention to ease the emotional stress of patients and their families. In addition, increasing of visiting time should be considered.

• Proceedings of the KIPE Conference
• /
• 2002.07a
• /
• pp.24-28
• /
• 2002

In a motor driving, the current rate is directly related to the rate of a switching device and in cost reduction, the parallel switching operation is the alternatives because it has the smaller current rate through current division. There are many investigations for the parallel switching operations to equaling the current division. However it remains many problems for practical usage. The reason is that the switching characteristics are mainly relied on the different saturation voltage of each device etc. and these factors are not altered by a circuit designer. In order to compensate this problem, a proper resistance is experimently inserted to the switching device. But this method can not be the optimal solution. Therefore this paper proposes a new parallel operation which uses a parallel phase winding to remove the traditional effect of switching device such as saturation voltage according to the division of current. Also the reliable and stable driving is improved through experiments and the detailed principles.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.07a
• /
• pp.392-395
• /
• 2003

For the first time, the new dual trench gate Emitter Switched Thyristor is proposed for eliminating snap-back effect which leads to a lot of serious problems of device applications. Also, the parasitic thyristor that is inherent in the conventional EST is completely eliminated in the proposed EST structure, allowing higher maximum controllable current densities for ESTs. Moreover, the new dual trench gate allows homogenous current distribution throughout device and preserves the unique feature of the gate controlled current saturation of the thyristor current. The conventional EST exhibits snap-back with the anode voltage and current density 2.73V and $354/{\S}^2$, respectively. But the proposed EST exhibits snap-back with the anode voltage and current density 0.93V and $58A/{\S}^2$, respectively. Saturation current density of the proposed EST at anode voltage 6.11V is $3797A/{\S}^2$. The characteristics of 700V forward blocking of the proposed EST obtained from two dimensional numerical simulations (MEDICI) is described and compared with that of the conventional EST.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.8 no.2
• /
• pp.117-124
• /
• 1988

From the test results of the adsorption characteristics of AE admixture, it was shown that the adsorption of AE admixture on fly ash was mearly completed in 30 minutes and the higher was ignition loss, the larger the quantity of saturation adsorption. Because most of the ignition loss of the fly ash was due to the unburned carbon, it could be said that the unburned carbon is the main reason of reduction of air content in AE concrete. On the other hand, in the case of superplasticizer, the amount of saturation adsorption in fly ash was lower than in cement and the same result was obtained in the dispersive effect. But, when using superplasticizer in fly ash substituting concrete, the fludity in the concrete was not decreased.

• Proceedings of the KOSOMBE Conference
• /
• v.1998 no.11
• /
• pp.96-97
• /
• 1998

3D TOF MR Angiography is able to obtain thinner slice thickness, higher SNR, therefore higher spatial resolution than 2D TOF MR Angiography. Since it uses longer TR than 2D TOF MRA to allow stronger in-flow effect, the background tissue may not be fully saturated. Thus background tissue signal can be further suppressed by MTS(Magnetization Transfer Saturation). Flow-compensation was accomplished by GMN(Gradient Moment Nulling), and tracking saturation was used to suppress vein signal. The different flow signal at the entry of the slab and output of the slab can be compensated by TONE(Tilted Optimized Non-saturating Excitation) RF pulse.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.11 no.9
• /
• pp.454-461
• /
• 2001

Acoustic noise and vibration of a BLDC motor is a coupled phenomenon between mechanical characteristics and electromagnetic origins through the motor air-gap. When a relative misalignment of rotor in the air-gap center exists on the assemblage, it is considered to influence the motor system characteristics. In this paper, the back electro motive force(BEMF) is analyzed by Finite Element Method(FEM) and verified by experiments for the SPM and IPM type motors. For magnetic field analysis, a FEM is used to account for the magnetic saturation. Using these results, the FEM is made to determine the appropriate electromagnetic field analysis in BLDC motors with rotor eccentricity ratio. A radial magnetic imbalance force of BLDC motor with rotor eccentricity is analyzed. Results demonstrate that the imbalance force is increased according to the degree of misalignment. An IPM motor, mostly chosen to realize high-speed operation, shows a worse effect on magnetic unbalanced forces and dynamic responses compared with SPM motor due to magnetic saturation when the rotor eccentricity exists.

• 한국신재생에너지학회:학술대회논문집
• /
• 2008.10a
• /
• pp.186-187
• /
• 2008

Electrical resistivity in hydrate-bearing sediments is sensitive to porosity, gas hydrate saturation, gas content, pore fluid composition, and temperature, so electrical measurements such as well logs and electromagnetic surveys have been used to explore gas hydrate-bearing formation. The high pressure tomography cell is designed considering the effect of electrode configuration and electrical shielding on tomography measurements and the safety. The evolution of electrical conductivity during $CO_2$ hydrate formation and dissociation reflects the combined effects of concurrent changes that include ionization of dissolved $CO_2$, temperature-dependent ionic mobility, changes in the degree of saturation, ion exclusion, surface conduction, and porosity changes. Measurements during hydrate formation and dissociation require careful analysis to properly interpret signatures, in particular when out-of plane conductivity anomalies prevail.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.5 no.1
• /
• pp.69-72
• /
• 2004

Compared to the barcode which is being widely employed to store information on products, the color code may find more various applications because of its favorable appearance and larger possible number of combinations. However, the color values read in practice may suffer from distortions from environments and devices. In this paper, we propose efficient ways to reduce the effect of such distortions and to detect color codes. for which we apply the Right Hand on Wall (RHOW) algorithm originated from the area of the maze search. The color codes used in this paper have high values of Hue and Saturation components and have a circular shape. We first preprocessed the images to detect candidate areas of color codes, and then applied the RHOW algorithm to determine optimal coordinates of rectangles enclosing the areas. As a result, we could obtain accurate coordinates of color codes by using the RHOW algorithm.

• Journal of the Korean Geotechnical Society
• /
• v.27 no.8
• /
• pp.31-37
• /
• 2011

In order to evaluate the effect of matric suction on the strength and deformation characteristics, the unsaturated unconfined compression test is performed for the statical1y compacted silty sand. Specimens used were made under conditions with various initial degrees of saturation. The initial matric suction, matric suction at the peak shear strength and the volumetric deformation during the shear process were measured. From these results, it was found that the initial degree of saturation exerts the influence on the behaviors of suction, peak shear strength and the volumetric deformation. Furthermore, the suction stress($P_s$) which means the apparent cohesion due to matric suction in the unsaturated shear strength could be derived.