• Korean Journal of Soil Science and Fertilizer
• /
• v.43 no.6
• /
• pp.776-781
• /
• 2010

Estimating the electrical conductivity of the saturation-paste (SP) is a common method to assess soil salinity. To assess soil salinity realistically, it is important to extract soil solution under field capacity. However, few studies on salinity assessment have been conducted for soil solution extracted under field capacity (-33 kPa; FC) moisture condition due to difficulty in soil solution extraction. This study was conducted to evaluate whether saturation-paste can represent field condition. Soil solutions were extracted from 22 soils in the plastic film house (PFH) and 18 soils in the reclaimed land (RL) at saturation and field capacity moisture conditions. Those were analyzed for pH, EC, cations ($K^+$, $Ca^{2+}$, $Mg^{2+}$, $Na^+$) and anions ($Cl^-$, ${NO_3}^-$, ${PO_4}^{3-}$, ${SO_4}^{2-}$). Both cations and anions of soil solution extracted from FC showed high correlations with ions extracted from SP in the PFH and the RL, except for ${NO_3}^-$, ${PO_4}^{3-}$ in the RL. Results of the t-test, the ECe and $EC_{FC}$ were not significant at significance level 0.05. The slopes of the equations between $EC_{FC}$ and ECe at more than sand 50% soils were higher than less than sand 50% soils, and differences of saturation percentage between SP and FC showed larger as increasing sand percentage. EC was related to soil water retention by soil texture. To determine the EC, soil texture and other soil properties which effect the soil moisture should be considered.

• Proceedings of the Korean Magnestics Society Conference
• /
• 1995.05a
• /
• pp.90-91
• /
• 1995

• Proceedings of the KIEE Conference
• /
• 1995.07c
• /
• pp.1434-1436
• /
• 1995

We designed and fabricated a highly sensitive magnetotransistor which employes the emitter region as a Hall plate for inducing Hall voltage across the emitter. The Hall voltage modulates the emitter basic junction bias on both sides of the emitter so that a large collector current difference is resulted. The specially designed $p^+$ ring around the emitter enhances accumulation of drifted electrons in the emitter and thus the Hall voltage. A relative sensitivity of 240/tesla is measured by operating the device in the saturation mode.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.975-980
• /
• 2004

Positioning system is widely used for many practical applications. This system requires a good controller to achieve high accuracy and fast response with simple and self-adjustable design. In order to satisfy the above requirements, a new practical controller for positioning systems, namely nominal characteristic trajectory following (NCTF) controller with PI compensator, has been proposed. However, the effect of actuator saturation can not be completely compensated for integrator windup when the object parameters vary. This paper presents a method to improve the NCTF controller by overcoming the problem of integrator windup by adopting a fuzzy system. The improvement of the NCTF controller is evaluated through simulation using a rotary positioning system. The simulation result has demonstrated the effectiveness of the compensated NCTF in overcoming the problem of integrator windup.

• Proceedings of the KIEE Conference
• /
• 2005.11b
• /
• pp.49-51
• /
• 2005

The saturation of transformer for short-circuit test suppress the peak current value during the test. And such phenomenon effect on the test results occasionally. This paper deals with the induction of the formula to restore the peak current value from the measured data.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2010.03a
• /
• pp.649-655
• /
• 2010

Unsaturated compressive tests are performed to evaluate the effect of matric suction on the strength and the deformation characteristics for statically compacted natural kaolin in Korea. Under different conditions of the initial degree of saturation in kaolin, the relationship between suction and the degree of saturation at failure can be expressed by unique soil-water characteristic curve. These results demonstrate that the newly established constant water content type unsaturated shear strength test equipment can be used for estimating the relationship between suction and the compressive strength.

• Journal of Korean Biological Nursing Science
• /
• v.2 no.1
• /
• pp.76-84
• /
• 2000

Recently, music therapy is widely used for various kinds of diseases. Music therapy has beneficial effects on emotional disorder and neuropsychiatric diseases in particular. This study was performed to evaluate the effect of singing on physiologic changes. We checked peripheral oxygen saturation and heart rate as indices of physiologic changes. The subjects were 19 control and 30 test group who were registered on the D welfare center for the elderly and agreed to join this study. They had been singing regularly for 6 months. The data were collected just before and after the singing. Data were analyzed with mean, t-test, and paired t-test using SPSS $PC^+$ program. The results were as follows: 1. Heart rate of the singing group decreased significantly after singing.(p<0.05) 2. Peripheral oxygen saturation of the singing group increased significantly after singing.(p<0.05) In conclusion, singing, a kind of aerobic exercise, has beneficial effects on cardiopulmonary system.

• Proceedings of the KSME Conference
• /
• 2002.08a
• /
• pp.491-494
• /
• 2002

To assess the electrostatic interaction of surfaces at the triple contact line, the electrostatic field is analyzed by using the finite element method. The Helmholtz free energy is used as a functional which should be minimized under an equilibrium condition. The numerical results are compared with the nonlinear analytical solution for a two-dimensional charged interface and linear solution for a wedge shaped geometry, which shows fairly good agreement. The method is applied to the analysis of electrostatic influence on the contact angle on a charged substrate. The excess free energy found to increase drastically as the contact angle approaches to zero. This excess free energy Plays an opposite role to the Primary electrocapillary effect, as the contact angle gets smaller. This enables an alternative explanation for the contact-angle saturation phenomenon occurring in electrical control of surface tension and contact angle.

• Journal of Magnetics
• /
• v.20 no.4
• /
• pp.421-426
• /
• 2015

This paper presents a practical method for estimation of average temperature in the permanent magnet (PM) of electric machine by using finite element analysis (FEA) and dynamo load experiment. First of all, the temperature effect of PM to the torque has been employed by FEA in order to evaluate the Temperature-Torque characteristic curve. The 1st order polynomial equation which is torque attenuation coefficient is derived by the FEA result of the Temperature-Torque curve. Next, torque saturation test with constant current condition is performed by dynamo load experiment. Then, the temperature trend can be estimated by adding the initial starting temperature using the torque attenuation coefficient and torque saturation curve. Lastly, estimated temperature is validated by infrared thermometer which measures temperature of PM surface. The comparison between the estimated result and experimental result gives a good agreement within a deviation of maximum $8^{\circ}C$.

• Korean Journal of Optics and Photonics
• /
• v.5 no.1
• /
• pp.67-73
• /
• 1994

The simulation code was developed to analyze the amplification properties of the regenerative amplifier, such as gain narrowing, nonlinear effect, and energy saturation. To reduce gain narrowing in the regenerative amplifier, the input pulse with a symmetrical shape and the same center wavelength of the active medium should be amplified in the active medium with a broad fluorescence linewidth. In this respect, Ti:Sapphire with a low nonlinear refractive index, a high saturation fluence, and a broad fluorescence linewidth is the most appropriate medium for the regenerative amplifier. The knowledge and the important parameters were acquired for the optimum design of the regenerative amplifier.