• 한국식품위생안전성학회지
• /
• 제28권4호
• /
• pp.299-305
• /
• 2013

2012년 3월부터 2012년 10월까지 광주시내 초 중 고등학교 주변 어린이 식품안전보호구역내 분식점, 길거리음식점 등에서 판매되고 있는 김밥, 떡볶이, 꼬치류, 오뎅, 튀김류 등 식사대용 및 간식용 어린이 기호식품 중 조리식품 124건에 대해서 탄수화물, 지방, 단백질 등 영양성분과 나트륨, 당함량 등을 검사하여 고열량 저영양 식품 해당여부에 대해서 조사하였다. 식사대용 어린이 기호식품 35건 중 토스트 12건이 모두 포화지방과 나트륨의 기준을 초과하여 고열량 저영양 식품에 해당되었고, 간식용 어린이 기호식품 89건 중에서 튀김류 4건과 닭강정 5건이 열량기준을 초과하였고, 또한 슬러쉬 27건 중에서 20건이 당함량을 초과한 것으로 나타나 총 29건이 고열량 저영양식품에 해당되었다. 그러나 이번에 조사한 식품들은 슬러쉬를 제외하고는 모두 저영양 식품 판단의 한 요소인 단백질 함량이 높고, 튀김류 등은 식품의 특성상 지방함량이 많아서 열량이 높고, 모두 조리식품들이기 때문에 식사로 섭취하게 되는 식품과 마찬가지로 나트륨 함량이 높아서 고열량 저영양 식품으로 분류된 것으로 보인다. 따라서 고열량 저영양 식품이라 하더라도 한두 번 섭취한다고 해서 문제가 생기는 것은 아니기 때문에 편식을 피하고 싱거운 맛에 익숙해지도록 하는 노력과 더불어 전체적으로 여러 유형의 식품들을 골고루 섭취하는 등, 올바른 식생활 습관이 어릴 때부터 형성되도록 소비자의 지속적인 노력이 필요할 것으로 생각된다.

• 대한교통학회지
• /
• 제29권2호
• /
• pp.111-121
• /
• 2011

기존 루프검지기를 이용한 반감응 신호제어는 한정된 검지영역으로 인해 대기 차량수에 따른 초기녹색시간의 산정이 불가능하며, 좌회전 베이 측면에서 진입하는 차량과 중차량 및 U턴 차량으로 인해 비합리적인 현시 조기종결문제가 발생할 수 있다. 따라서 본 연구에서는 감응현시의 초기녹색시간을 대기 차량수에 맞게 최적화하고, 검지영역 내 차량소거 여부를 파악함으로써 현시의 연장 및 조기종결을 결정하는 좌회전 감응식 신호제어전략을 개발하였다. 차량의 검지를 위해 영상검지기의 Video Image Tracking기술을 이용하였으며, 영상검지영역은 목적에 맞게 Zone in Zone방식의 3개 영역으로 구분하여 Zone1은 차량의 존재유무 파악, Zone2는 대기 차량수 파악, Zone3는 통과 차량수 파악의 기능을 수행하도록 설계하였다. CORSIM을 이용한 본 좌회전 감응제어의 현장 적용성 평가 결과, 정주기 제어, 반감응 제어(1), 반감응 제어(2)에 비해 Control delay가 각각 23.10%, 15.06%, 4.34% 감소하였으며, Queue time은 36.24%, 20.10%, 7.42%, Total time은 14.36%, 7.02%, 2.96% 감소하여 운영효율이 향상된 것으로 나타났다. 또한, 직진과 좌회전 v/c비에 따른 적용성 평가 결과, 직진교통량이 포화상태에 근접할수록, 좌회전 교통량이 적을수록 개선효과 큰 것으로 나타났다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제4권1호
• /
• pp.101-110
• /
• 2000

In case heavy rainfall is a key factor of slope failure, the failure zone is usually developed within the depth of 3~5m from the ground surface regardless of the location of the watertable. If rainfall is taken into consideration, it is general that the slope stability analysis is carried out under the assumption that the cut slope is saturated to the slope surface or the watertable elevates to a certain height so that ${\gamma}_{sat}$, the unit weight of saturated soil, is used. However, the analysis method mentioned above can't exactly simulate the variation of pore water pressure in the slope and yields different failure shape. The applicability of slope stability analysis method considering the distribution of pore water pressure within the slope with heavy rainfalls, was checked out after the stability analysis of a lage-scale cut slope in a highway construction site, where surface failure occurred with heavy rainfalls. An appropriate slope stabilization method is proposed on the base of the outcome of the analysis.

• 한국환경과학회지
• /
• 제31권1호
• /
• pp.77-85
• /
• 2022

Environmental contamination by organic compounds are not only restricted to water, but extends to soil and groundwater as well. However, highly oxidized compounds, such as halogenated organics and nitro-compounds, can be detoxified employing reducing methods. Permeable reactive barrier is one of the representative technologies where zero-valent metals (ZVMs) are employed for groundwater remediation. However, organics contaminates often contaminate the unsaturated zone above the groundwater. Despite the availability of technologies like soil vapor extraction and bioremediation, removing organic compounds from this zone represents several challenges. In this study, the reduction of nitrobenzene to aniline was achieved using zero-valent iron (ZVI) under unsaturated conditions. Results indicated that the water content was an important variable in this reaction. Under dry conditions (water content = 0.2%), the reduction reaction was inhibited; however, when the water content was between 10% and 25% (saturated condition), ZVI can reduce nitrobenzene. Palladized iron (Pd/Fe) can be used to reduce nitrobenzene when the water content is between 2.5% and 10%. The reaction was evaluated over a wide range of temperatures (10 - 40 ℃), and the results indicated that increasing the temperature resulted in increased reaction rates under unsaturated conditions.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2007년 가을학술발표회
• /
• pp.481-501
• /
• 2007

Excessive rainfalls due to climatic changes can trigger an increase in rainfall-induced slope failures that pose real threats to both lives and properties. Many high slopes in residual soils could stand at a steep angle, but failed during or after rainfall. Commonly, these slopes have a deep groundwater table and negative pore-water pressures in the unsaturated zone above the groundwater table contribute to the shear strength of soil and consequently to factor of safety of the slope. Stability assessment of slope under rainfall requires information on rate of rainwater infiltration in the unsaturated zone and the resulting changes in pore-water pressure and shear strength of soil. This paper describes the application of unsaturated soil mechanics principles and theories in the assessment of rainfall effect on stability of slope through proper characterization of soil properties, measurement of negative pore-water pressures, seepage and slope stability analyses involving unsaturated and saturated soils. Factors controlling the rate of changes in factor of safety during rainfall and a preventive method to minimize infiltration are highlighted in this paper.

• Journal of Radiation Protection and Research
• /
• 제29권1호
• /
• pp.41-48
• /
• 2004

A safety assessment code, called SAGE (Safety Assessment Groundwater Evaluation), has been developed to describe post-closure radionuclide releases and potential radiological doses for low- and intermediate-level radioactive waste (LILW) disposal in an engineered vault facility in Korea. The conceptual model implemented in the code is focused on the release of radionuclide from a gradually degrading engineered barrier system to an underlying unsaturated zone, thence to a saturated groundwater zone. The radionuclide transport equations are solved by spatially discretizing the disposal system into a series of compartments. Mass transfer between compartments is by diffusion/dispersion and advection. In all compartments, radionuclides ate decayed either as a single-member chain or as multi-member chains. The biosphere is represented as a set of steady-state, radionuclide-specific pathway dose conversion factors that are multiplied by the appropriate release rate from the far field for each pathway. The code has the capability to treat input parameters either deterministically or probabilistically. Parameter input is achieved through a user-friendly Graphical User Interface. An application is presented, which is compared against safety assessment results from the other computer codes, to benchmark the reliability of system-level conceptual modeling of the code.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2003년도 총회 및 춘계학술발표회
• /
• pp.168-171
• /
• 2003

연속주입추적자시험이 실시된 현장사이트의 규모는 4.5m$\times$4.5m$\times$6.0m 정도이다. 시험 사이트내에서 실시된 추적자시험은 주입공(Pl)에서 Rhodamine WT 50ppm 용액을 1.8$\ell$/min의 주입율로 6일 동안 연속적으로 주입함과 동시에 관측공(P2, P3, Il, I2, I3)에서 일정한 시간간격으로 지하수를 채수하여 추적자농도를 산출하였다. 시험결과, 지하수면 하부를 포함하는 관측공(P2, P3)의 최대추적자농도는 초기주입농도의 10% 정도이며, 지하수면 상부에 위치한 지하수공(Il, I2, I3)들에서의 최대추적자농도는 초기농도의 75% 정도로서 추적자의 농도차이가 상대적으로 매우 크게 나타났다. 본 연구에서는 자유면대수층내에서 포화대를 포함한 관측공과 비포화대만을 포함한 관측공에서의 수리분산특성에 대해 비교.분석한 결과, 오염물이 연속적으로 토양에 유입되는 경우 비포화대 구간에서는 이류기작에 의한 농도희석이 거의 없으므로 오염물농도가 매우 클 것으로 판단된다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제10권1호
• /
• pp.65-73
• /
• 1986

Surface fatigue crack propagation tests by plane bending fatigue were conducted on the welding specimens of an aluminium alloy, A5083-0, having an edge through thickness notch to study the fatigue crack growth characteristics. Moreover, the experiments were performed in order to clarify the fatigue crack initiation and growth. The properties of fatigue crack growth were quantitatively inspected in welded metal, heat-affected zone and base metal of the welding specimens. The main results obtained are summarized as follows: 1. It is found that the hardness distributions of A5083-0 aluminium alloy weldments are quite different with those of steel material weldments, so that the hardness distribution becomes lower in the following order: base metal, heat-affected zone and weld metal. 2. It is observed that the grain size of this specimen weldment appears to be almost equal to the base metal, when TIC welding method is adopted. 3. In a surface fatigue crack initiation and growth, the fatigue crack does not begin by opening-closing mechanism until hardening is saturated at the crack tip. 4. The fatigue crack growth characteristics of A5083-0 alluminium alloy weldments can be concluded.$${\frac{da}{dn}}=C({\Delta}K)^n=3.8{\times}10^{-9}{({\frac}{1}{2}{\Delta}S_t{\sqrt{{\pi}a}})}^{2.4}$$

• Geomechanics and Engineering
• /
• 제1권1호
• /
• pp.35-52
• /
• 2009

A significantly thick zone of steep slopes is commonly encountered above groundwater table and the soils within this zone are unsaturated with negative pore-water pressures (i.e., matric suction). Matric suction contributes significantly to the shear strength of soil and to the factor of safety of unsaturated slopes. However, infiltration during rainfall increases the pore-water pressure in soil resulting in a decrease in the matric suction and the shear strength of the soil. As a result, rainfall infiltration may eventually trigger a slope failure. Therefore, understanding of shear strength characteristics of saturated and unsaturated soils under shearing-infiltration (SI) conditions have direct implications in assessment of slope stability under rainfall conditions. This paper presents results from a series of consolidated drained (CD) and shearing-infiltration (SI) tests. Results show that the failure envelope obtained from the shearing-infiltration tests is independent of the infiltration rate. Failure envelopes obtained from CD and SI tests appear to be similar. For practical purposes the shear strength parameters from the CD tests can be used in stability analyses of slopes under rainfall conditions. The SI tests might be performed to obtain more conservative shear strength parameters and to study the pore-water pressure changes during infiltration.

• 한국농공학회논문집
• /
• 제54권5호
• /
• pp.69-77
• /
• 2012

Relative density, used to express dynamics condition of sand quantitatively, is measured by RI Test, Standard Penetration Test and Cone Penetration Test. Each measurement method has demerits, which is complicated or needs a specific analysis instrument and an analysis of expert. Also the ground is in wet condition commonly because of an unsaturated zone between a saturated zone and a surface, so the behaviour of the ground has different engineering properties unlike the dry ground and it diminishes accuracy of measuring relative density. In this study, the correlation between relative density and penetration of fall cone test in dry condition and wet condition with variation of water content was analyzed and a simple measuring method for relative density was suggested. As a result, there were difference of penetration between dry sands and wet sands, the correlation between relative density and penetration showed linear expression and relative density could be measured by the linear relation.