• Journal of Power Electronics
• /
• 제6권1호
• /
• pp.18-28
• /
• 2006

The Electric Power Subsystem (EPS) is one of the most critical systems on any satellite because nearly every subsystem requires power. This makes the choice of power systems the most important task facing satellite designers. The main purpose of the Satellite EPS is to provide continuous, regulated and conditioned power to all the satellite subsystems. It has to withstand radiation, thermal cycling and vacuums in hostile space environments, as well as subsystem degradation over time. The EPS power characteristics are determined by both the parameters of the system itself and by the satellite orbit. After satellite separation from the launch vehicle (LV) to its orbit, in almost all situations, the satellite subsystems (attitude determination and control, communication and onboard computer and data handling (OBC&DH)), take their needed power from a storage battery (SB) and solar arrays (SA) besides the consumed power in the EPS management device. At this point (separation point, detumbling mode), the satellite's angular motion is high and the orientation of the solar arrays, with respect to the Sun, will change in a non-uniform way, so the amount of power generated by the solar arrays will be affected. The objective of this research is to select satellite EPS component types, to estimate solar array illumination parameters and to determine the efficiency of solar arrays during both detumbling and normal operation modes.

• 대한원격탐사학회지
• /
• 제26권6호
• /
• pp.645-652
• /
• 2010

The performance of the payload Electro-Optical System (EOS) in satellite system is affected by various factors, such as optics design, camera electronics design, and the characteristics of the CCD (Charge Coupled Device) used, etc. Of these factors, the camera electronics design is somewhat unique in that its operational parameters can be adjusted even after the satellite launch. In this paper, the effect of video gain on the non-uniformity correction performance is addressed. And a new optimal non-uniformity correction scheme is proposed and analyzed using the data from real camera electronics unit based on a TDI (Time Delayed Integration) type of CCD. The test results show that the performance of the conventional non-uniformity correction scheme is affected significantly when the video gain is added. On the other hand, in our proposed scheme, the performance is not dependent on the video gain. The insensitivity of the non-uniformity performance on the video-gain is mainly due to the fact that the correction is performed after the dark signal is subtracted from system response.

• 전자공학회논문지A
• /
• 제31A권5호
• /
• pp.58-67
• /
• 1994

In this paper, It was designed the 2.8GHz local oscillator which convert 14.5 14.8GHz uplink frequency to 11.7 12.0GHz downlink frequency by the receiving mixer on the communication satellite transponder according to the rating of domestic satellite. Mukunghwa 1. To prevent the variation of the communication channel bandwidth, it needs a high stability and low phase noise characteristics. So we designed to get the target frequencey by multipling the output signal from the crystal oscillator. We got the simplicity of the circuit by manufacturing the X4 multiplier with transistor which is ordinarily used as a device of a below X3 multiplier for the efficiency.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제15권4호
• /
• pp.501-505
• /
• 2015

In this paper, we demonstrated a 4W power amplifier monolithic microwave integrated circuit (MMIC) for Ku-band satellite communication applications. The used device technology relies on $0.25{\mu}m$ GaAs pseudomorphic high electron mobility transistor (PHEMT) process. The 4W power amplifier MMIC has linear gain of over 30 dB and saturated output power of over 36.1 dBm in the frequency range of 13.75 GHz ~ 14.5 GHz. Power added efficiency (PAE) is over 30 %.

• 전자통신동향분석
• /
• 제39권1호
• /
• pp.36-47
• /
• 2024

Virtualization technology supports the execution of software unrelated to the hardware environment through the decoupling of software and hardware. Additionally, it enables network slicing, allowing one physical device to be divided and used by a function or service by supporting sharing with isolation. Virtualization enables flexible platform use, allowing a variety of services to be launched without changes or additions to the hardware platform. We describe virtualization technology trends in satellite/mobile communication systems. Basic concepts and technical definitions are included, and the current status of research and development by domestic and foreign organizations, including the Electronics and Telecommunications Research Institute, is analyzed. Finally, future prospects and implications are discussed.

• 한국정밀공학회지
• /
• 제21권8호
• /
• pp.120-128
• /
• 2004

The impulse between launch vehicle and atmosphere can generate a lot of noise and vibration during the process of launching a satellite. Structurally, the electronic equipment of a satellite consists of an aluminum case containing PCB. Each PCB has resistors and IC. Noise and vibration of the wide frequency band are transferred to the inside of fairing, subsequently creating vibration of the electronic equipment of the satellite. In this situation, random vibration can cause malfunctioning of the electronic equipment of the device. Furthermore, when the frequency of random vibration meets with natural frequency of PCB, fatigue fracture may occur in the part of solder joint. The launching environment, thus, needs to be carefully considered when designing the electronic equipment of a satellite. In general, the safety of the electronic equipment is supposed to be related to the natural frequency, shapes of mode and dynamic deflection of PCB in the electronic equipment. Structural vibration analysis of PCB and its electronic components can be performed using either FEM or vibration test. In this study, the natural frequency and dynamic deflection of PCB are measured by FEM, and the safety of the electronic components of PCB is evaluated according to the results. This study presents a unique method for finite element modeling and analysis of PCB and its electronic components. The results of FEA are verified by vibration test. The method proposed herein may be applicable to various designs ranging from the electronic equipments of a satellite to home electronics.

• 대한전자공학회논문지TC
• /
• 제45권10호
• /
• pp.10-16
• /
• 2008

보통 저궤도를 선회하는 위성은 자기장으로 연결된 반알렌대를 통과하며, 이 안에 갇혀 주기적인 운동으로 남극과 북극을 이동하는 하전입자에 의해 부품이 손상되고 수명이 단축되는 악 영향을 받고 있다. 그중 방사선에 의한 SEU (Single Event Upset) 등은 우주선에 탑재된 반도체 소자의 오동작 유발의 원인이 되고 있다. 본 연구에서는 우주환경 방사선에서 고려해야 할 점들 중에서 특히 과학기술위성 1호 탑재 컴퓨터(On-board Computer, OBC)에서의 싱글이벤트업셋(Single Event Upset, SEU)의 영향을 고찰해 보고 거기에서 극복할 수 있는 알고리즘을 제시하고 있다. SEU 누적을 방지하기 위하여 매 일정한 시간마다 전체 메모리를 읽고/쓰는 과정(memory wash)이 필요하며 워쉬 주기 선정에 대해서도 고찰했다. 이러한 실험은 과학기술위성 시리즈 및 저궤도 위성용 탑재 컴퓨터의 성능 저하를 이해하는데 도움을 줄 수 있을 뿐만 아니라, 다목적 실용위성 시리즈의 각 모듈 개발에도 적극 활용 할 수 있을 것으로 기대된다.

• 한국항행학회논문지
• /
• 제27권4호
• /
• pp.410-416
• /
• 2023

저궤도위성 통신시스템의 경우, 정지 궤도 위성 통신시스템과 달리 지상 기기 기준 상대적으로 고속 기동하여 움직이며, 지상 기기와 이루는 각도 역시 고정되지 않고 넓은 범위에서 가변적으로 되므로 지상에 존재하는 건물, 산 등과 같은 지형물의 위치 및 높이에 따라 위성 통신 시스템임에도 불구하고 다중 경로로 인한 주파수 선택적 페이딩 현상이 나타날 수 있다. 본 논문에서는 저궤도위성 통신시스템에서 발생할 수 있는 저궤도 다중 경로 페이딩 위성 채널 모델과 저궤도위성의고속기동으로 발생하는 도플러 주파수 천이에 대하여 분석하고, 이를 기반으로 다중 경로 페이딩 위성 채널 모델에 적합한 OFDM(Orthogonal Frequency Division Multiplexing) 및 SC-FDE(Single Carrier Frequency Domain Equalizer) 전송 방식에 대하여 효과적인 등화 기법을 제시한다. 또한, 본 논문에서는 제시된 등화 기법이 적용된 OFDM 및 SC-FDE 전송방식의 저궤도 다중경로 페이딩 위성 채널 환경에서의 성능을 모의실험을 통하여 비교 분석하였으며, SC-FDE 방식이 OFDM 방식보다 우수함을 확인하였다.

• 한국항공우주학회지
• /
• 제46권10호
• /
• pp.876-882
• /
• 2018

이 연구의 목적은 상업적으로 가장 많이 쓰이는 패키징의 하나인 PBGA 구조가 발사중 인공위성에서 발생하는 강력한 임의 진동하에서 구조적 신뢰성을 유지하는가에 대한 검증에 있다. 실험시편을 만들기 위해 데이지 체인이 형성된 회로기판에 두 가지 큰 사이즈의 PBGA칩들을 실장시킨 후, 인공위성의 전자장비 채결에 사용되는 일반적인 알루미늄 프레임에 고정하여 실험에 필요한 샘플을 제작하였다. 이 샘플을 진동 시험기에 고정시키고 22.7 Grms의 수락수준 및 32.1 Grms의 인증수준 등 두 단계로 구성된 임의진동을 사용하여 주어진 시간에 따라 실험을 실시하였다. 실험 결과 모든 샘플에서 솔더의 균열이 발생되지 않았으며, 차후 항공 및 우주용 전자장비를 대치할 수 있는 효과적인 패키징 구조의 가능성을 보여 줬다. 또한 유한요소법을 이용하여 솔더의 응력을 계산하고 그 발생 메커니즘을 해석하였다.

• Journal of Positioning, Navigation, and Timing
• /
• 제4권3호
• /
• pp.141-150
• /
• 2015

In this study, a Global Navigation Satellite System (GNSS) / Inertial Navigation System (INS) / odometer / barometer integrated navigation system that uses a commercial navigation device including Micro Electro Mechanical Systems (MEMS) accelerometer and gyroscope in addition to GNSS, odometer information obtained from a vehicle, and a separate MEMS barometer sensor was implemented, and the performance was verified. In the case of GNSS and GNSS/INS integrated navigation system that are generally used in a navigation device, the performance would deteriorate in areas where GNSS signals are not available. Therefore, an integrated navigation system that calculates a better navigation solution in areas where GNSS signals are not available compared to general GNSS/INS by correcting the velocity error of GNSS/INS using an odometer and by correcting the cumulative altitude error of GNSS/INS using a barometer was suggested. To verify the performance of the navigation system, a commercial navigation device (Softman, Hyundai Mnsoft, http://www.hyundai-mnsoft.com) and a barometer sensor (ST Company) were installed at a vehicle, and an actual driving test was performed. To examine the performance of the algorithm, the navigation solutions of general GNSS/INS and the GNSS/INS/odometer/barometer integrated navigation system were compared in an area where GNSS signals are not available. As a result, a navigation solution that has a smaller position error than that of GNSS/INS could be obtained in the area where GNSS signals are not available.