• Journal of Astronomy and Space Sciences
• /
• v.8 no.1
• /
• pp.85-98
• /
• 1991

Geomagnetism was used to control the attitude of the small scientific satellite at low altitude in sun-synchronous orbit. First, we analyzed the telemetry data. The rotation state of the satellite, can be known from the magnitude and variations of the magnetic field which is measured from the 3 axis magnetometer. In axisymmetric case, it is possible to control the attitude of the satellite by changing the rotation velocity of each 3 axis. The algorithm and the program were developed to calculate the supply time of the current operating the magnetorquer. This attitude control can be applied when the satellite is in tumbling motion and after passive control is attained by the Gravity gradient boom.

• Korean Journal of Remote Sensing
• /
• v.22 no.1
• /
• pp.63-73
• /
• 2006

Currently, in order to achieve accurate geolocation of satellite images we need to generate control points from individual scenes. This requirement increases the cost and processing time of satellite mapping greatly. In this paper we investigate the feasibility of modeling entire image strips that has been acquired from the same orbital segments. We tested sensor models based on satellite orbit and attitude with different sets of unknowns. We checked the accuracy of orbit modeling by establishing sensor models of one scene using control points extracted from the scene and by applying the models to adjacent scenes within the same orbital segments. Results indicated that modeling of individual scenes with $2^{nd}$ order unknowns was recommended. In this case, unknown parameters were position biases, drifts, accelerations and attitude biases. Results also indicated that modeling of orbital segments with zero-degree unknowns was recommended. In this case, unknown parameters were attitude biases.

• International Journal of Aeronautical and Space Sciences
• /
• v.11 no.2
• /
• pp.87-97
• /
• 2010

A fault tolerant satellite attitude control scheme with a modified iterative learning law is proposed for dealing with actuator faults. The actuator fault is modeled to reflect the degradation of actuation effectiveness, and the solar array-induced disturbance is considered as an external disturbance. To estimate the magnitudes of the actuator fault and the external disturbance, a modified iterative learning law using only the information associated with the state error is applied. Stability analysis is performed to obtain the gain matrices of the modified iterative learning law using the Lyapunov theorem. The proposed fault tolerant control scheme is applied to the rest-to-rest maneuver of a large satellite system, and numerical simulations are performed to verify the performance of the proposed scheme.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.36 no.5
• /
• pp.514-523
• /
• 2008

This paper presents a single-axis simulator developed to verify the attitude control algorithm of KAUSAT-2 satellite. Named KAUSatSIM, the simulator is composed of a single-axis rotation table using an air-bearing that simulates a frictionless environment, as well as sensors and momentum wheel that was used on KAUSAT-2. The simulator can be utilized for verification of KAUSAT-2 attitude control algorithm, development of new algorithms, and verification of performance. Tests were performed on the single-axis rotation simulator using the momentum wheel in order to verify the attitude control algorithm of KAUSAT-2. Satisfactory test results were obtained by designing a wheel controller that employs the proportional-derivative control method. In addition, a propulsion system was added and tested for development of a new satellite attitude control algorithm.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.1465-1469
• /
• 2003

In general satellite verification process, the AOCS (Attitude & Orbit Control Subsystem) should be verified through several kinds of verification test which can be divided into two major category like FBT (Fixed Bed Test) and polarity test. And each test performed in different levels such as ETB (Electrical Test Bed) and satellite level. The test method of FBT is to simulate satellite dynamics with sensors and actuators supported by necessary environmental models in ETB level. The VDS (Vehicle Dynamic Simulator) try to make the real situation as possible as the on-board processor will undergo after launch. The purpose of FBT test is to verify that attitude control logic function and hardware interface is designed as expected with closed loop simulation. The VDS is one of major equipments for performing FBT and consists of software and hardware parts. The VDS operates in VME environments with target board, several commercial boards and custom boards based on the VxWorks real time operating system. In order to make time synchronization between VDS and satellite on-board processor, high reliable semaphore was implemented to make synchronization with the interrupt signal from on-board processor. In this paper, the real-time operating environment used on VDS equipment is introduced, and the hardware and software configurations of VDS summarized in the systematic point of view. Also, we try to figure out the operational concept of VDS and AOCS verification test method with close-loop simulation.

• 제어로봇시스템학회:학술대회논문집
• /
• 1991.10a
• /
• pp.395-400
• /
• 1991

In spinning satellite, a gyrotorquer generates a control torquer along two orthogonal axes normal to the spin axis of the vehicle. Matrix Fraction Description(MFD) are used to obtain minimal realization of the transfer matrix relating the attitude angles and the rate of rotation of the gimbals of gyrotorquer. In this paper, the Linear Quadratic Gaussian with Loop Transfer Recovery and H.meihodologies are used to design controller for spinning satellite.

• Aerospace Engineering and Technology
• /
• v.10 no.2
• /
• pp.87-93
• /
• 2011

FSSA(Fine Sun Sensor Assembly) is the important sensor for satellite attitude control. FSSA measures the direction of the sun's rays and determines whether the satellite is in the eclipse or not. FSSA for GEO Satellite is also used to acquire the attitude error information in the attitude control reference frame and acquire the Sun direction during transfer orbit or mission Process. This paper shows the configuration of Fine Sun Sensor for LEO and GEO Satellite and their principle of operation that angle measurement is obtained by using the transfer function which is the ratio of the difference between output currents of Solar Cell to the sum of all output currents.

• 제어로봇시스템학회:학술대회논문집
• /
• 1992.10a
• /
• pp.159-164
• /
• 1992

In this paper, the complex nonlinear dynamics of a satellite is obtained. And it is shown that several limitations exist when the magnetorquer is used as an active actuator to attitude control. Such limitations cause a delayed convergence of pitch and roll angle. The simulation results insure that the roll angle bias is dependent on the z axis spin rate. And a heuristic algorithm is applied to control the attitude libration through the computer simulations.

• 제어로봇시스템학회:학술대회논문집
• /
• 1993.10a
• /
• pp.788-792
• /
• 1993

The objective of this study is to develope a satellite dynamic simulator, which can test and analyze the performance of spacecraft attitude control, antenna pointing instruments, communication equipments and spacecraft components under the space environment. The satellite simulator can be used to predict the events such as malfunction and failure of satellites in space during operation and can be used to protect against emergencies. At first, the performance test system of attitude control is investigated which can simulate motion and verify stability of spacecraft. Our system consists of an attitude control main processor and a sub-processor including some real hardwares such as attitude sensors and actuators. In this paper, we describe the procedure of designing and manufacturing the dynamic simulator hardware, which consists of the central processor board, the sub-processor board and the sun sensor, and also communication between the components.

• Journal of Astronomy and Space Sciences
• /
• v.15 no.1
• /
• pp.245-250
• /
• 1998

Attitude determination and control of satellite is important component which determines the accomplish satellite missions. In this study, attitude control using reaction wheels and momentum dumping of wheels are considered. Attitude control law is designed by Sliding control and LQR. Attitude maneuver control law is obtained by Shooting method. Wheels momentum dumping control law is designed by Bang-Bang control. Four reaction wheels are configurated for minimized the electric power consumption. Wheels control torque and magnetic moment of magnetic torquer are limited.