• 제목/요약/키워드: Satcom

검색결과 26건 처리시간 0.018초

수상함 MIL-SATCOM과 ES간의 전자기 간섭 개선을 위한 EMI 차폐판 최적설계 연구 (A Study on EMI Shield Optimization for Improvement of EMI between MIL-SATCOM and ES on a Surface Ship)

  • 장호성;함영훈;조관준
    • 한국군사과학기술학회지
    • /
    • 제20권1호
    • /
    • pp.63-71
    • /
    • 2017
  • During the sea trial test, we discovered EMI(Electromagnetic Interference) between MIL-SATCOM parabolic antenna and ES(Electronic Warfare Support) omni antenna. Emitted side lobe of CW(Continuous Wave) from MIL-SATCOM raises the threshold level of ES omni antenna. Therefore detection rate of ES is decreased. To solve this problem, the path of side lobe of CW from MIL-SATCOM should be blocked using EMI shield. This paper presents the method how to calculate the size of EMI shield, material, and optimized deployment. The test of the EMI shield effect was performed on a surface ship. After installing EMI shield, EMI has been decreased significantly. This paper will provide a method how to design EMI shield and a way to verify the result.

위성통신 안테나의 위성 지향각도 해석적 모델의 실증 (Proof of SATCOM Antenna Heading Angle's Analytical Model)

  • 조규한
    • 한국시뮬레이션학회논문지
    • /
    • 제28권3호
    • /
    • pp.75-82
    • /
    • 2019
  • 유선통신의 사용이 제한되는 상황에서의 통신방법으로 널리 활용되는 위성통신(SATCOM)은 정지궤도위성을 사용하여 통신하기 때문에, 우주 공간의 크게 변하지 않는 한 지점으로 통신용 안테나를 지향시킴으로써 통신할 수 있다. 지상에 설치되어 움직이지 않는 안테나를 위성에 지향시키기 위해서는 안테나가 위치한 위도, 경도, 고도에서 앙각, 방위각과 같은 위성지향각도를 아는 것이 중요하다. 더욱이 비행기와 같이 움직이는 물체위에 탑재된 안테나를 이용하여 위성을 지향 할 경우 지향각도의 계산은 필수적이다. 본 연구는 정지궤도 위성을 지향하기 위해 필요한 안테나 앙각과 방위각의 계산방법을 제시하고 그 방법에 따라서 한반도 지표상의 위경도에 따라서 어떤 지향각도가 요구되는지 시뮬레이션을 수행하였다. 그리고 시뮬레이션 결과를 검증하기 위하여 모노펄스 신호(Monopulse Signal)를 이용하여 위성을 지향하는 위성통신 안테나를 비행기에 탑재하여 안테나의 위치에 따라서 지향각도가 어떻게 변하는지 실험적으로 확인하였다. 이 결과를 시뮬레이션과 비교해 봄으로써 위성통신 안테나의 지향에 필요한 앙각과 방위각의 시뮬레이션의 정확도를 확인하였고, 추가적으로 필요한 안테나 편파각의 계산에 대한 방향을 제시하였다.

OPTIMIZED CONFIGURATIONS OF KA-BAND TRANSPONDER SUBSYSTEM FOR ETRI'S SATCOM SYSTEM

  • Lee Yong-Min;Lee Seong-Pal;Park Jae-Woo
    • 한국우주과학회:학술대회논문집(한국우주과학회보)
    • /
    • 한국우주과학회 2004년도 한국우주과학회보 제13권2호
    • /
    • pp.312-315
    • /
    • 2004
  • In order to optimize the configurations of Ka-band transponder subsystem, the tradeoff design has been performed iterately with emphasis on the improving performances of the payload system as well as effectiveness of Satellite Communication (SATCOM) system operation. It is necessary to allocate performance to the transponder equipments and to keep providing the main services. It begins with analyzing the requirements and allocating performance parameters by establishing budgets for electrical and mechanical characteristics. In this paper, introduction of SATCOM system and finally optimized Ka-band transponder configuration that is to be used for preliminary design will be mainly presented.

  • PDF

Monopulse Tracking Performance of a Satcom Antenna on a Moving Platform

  • Cho, Gyuhan;Kim, Gwang Tae
    • Journal of electromagnetic engineering and science
    • /
    • 제17권3호
    • /
    • pp.120-125
    • /
    • 2017
  • A satellite communication (Satcom) antenna mounted on a moving platform provides a controlled heading that enables a geosynchronous satellite to communicate with the ground. A monopulse tracking method is effective for antenna control on a vehicle when it vibrates severely. However, this method has unexpected obstacles and its control performance is insufficient. To improve its control performance, the control command and monopulse error, the signal delay, and the radome effect are evaluated through tests. The authors then propose a method to transform the antenna error from 3D coordinates to 2D antenna coordinates. As a result, the antenna control performance is improved. As indicated in this study, examining antenna systems using the monopulse method on moving platforms is possible by understanding the antenna test process.

통해기 위성통신시스템의 운용계획 (Operation Plans of the Satellite Communications System for COMS)

  • 최경수;신천식;이성팔
    • 한국위성정보통신학회논문지
    • /
    • 제1권2호
    • /
    • pp.71-75
    • /
    • 2006
  • 본 논문은 통신해양기상위성(이하 통해기위성) 위성통신시스템(Ka 대역 통신탑재체 시스템, 정지궤도 위성관제 시스템 및 위성시험지구국으로 구성)의 운용계획에 대해 기술한 논문이다. 위성통신시스템(SATCOM)을 구성하는 Ka 대역 통신탑재체, 시험지구국 및위성관제국 각각의 임무계획 및 제공서비스 종류를 기술하며, 각 시스템간의 인터페이스에 대한 구성 및 기능에 대해서도 기술한다. 특히 위성통신 시스템을 구성하는 각각의 서브시스템에 대한 운용상의 항목 및 기능을 도출하고, 그리고 운용계획을 기술하였다. 또한 통해기위성 통신잡재체를 감시 및 제어하고, 통신서비스망을 감시하기 위한 PCS(Payload Control System)의 기능정의, 구성도 및 운용계획을 제시하였다.

  • PDF

위성통신용 삼중대역 동시사용 안테나 설계 (Design of a Simultaneously Operable Tri-band Antenna for SATCOM)

  • 우병석
    • 한국인터넷방송통신학회논문지
    • /
    • 제15권2호
    • /
    • pp.195-202
    • /
    • 2015
  • 위성통신 서비스가 점점 증가함에 따라 단일대역 안테나의 성능을 넘어서는 이중대역 또는 삼중대역 안테나의 필요성도 증가하고 있다. 본 논문에서는 위성통신용 삼중대역 동시사용 안테나를 제안한다. 교체형 혼을 통해 삼중대역을 구현하는 일반적인 다중대역 안테나와는 달리 주름형 혼과 유전체 혼으로 구성된 삼중대역 급전부 조립체 및 그레고리안 타입의 반사판을 사용하여 삼중대역(X, Ku, Ka대역) 신호의 동시 송수신을 가능하게 한다. 제안된 안테나의 특성은 모의실험과 실제측정으로 비교 분석하였다. 그 결과, 제안된 삼중대역 안테나의 방사패턴은 모의실험 계산결과와 비슷한 성능을 보였고, 규격 또한 만족하였다.

Four-channel GaAs multifunction chips with bottom RF interface for Ka-band SATCOM antennas

  • Jin-Cheol Jeong;Junhan Lim;Dong-Pil Chang
    • ETRI Journal
    • /
    • 제46권2호
    • /
    • pp.323-332
    • /
    • 2024
  • Receiver and transmitter monolithic microwave integrated circuit (MMIC) multifunction chips (MFCs) for active phased-array antennas for Ka-band satellite communication (SATCOM) terminals have been designed and fabricated using a 0.15-㎛ GaAs pseudomorphic high-electron mobility transistor (pHEMT) process. The MFCs consist of four-channel radio frequency (RF) paths and a 4:1 combiner. Each channel provides several functions such as signal amplification, 6-bit phase shifting, and 5-bit attenuation with a 44-bit serial-to-parallel converter (SPC). RF pads are implemented on the bottom side of the chip to remove the parasitic inductance induced by wire bonding. The area of the fabricated chips is 5.2 mm × 4.2 mm. The receiver chip exhibits a gain of 18 dB and a noise figure of 2.0 dB over a frequency range from 17 GHz to 21 GHz with a low direct current (DC) power of 0.36 W. The transmitter chip provides a gain of 20 dB and a 1-dB gain compression point (P1dB) of 18.4 dBm over a frequency range from 28 GHz to 31 GHz with a low DC power of 0.85 W. The P1dB can be increased to 20.6 dBm at a higher bias of +4.5 V.

위성통신 시스템에서 이동형 위성단말을 위한 개루프 전력제어 알고리즘 (An Open-Loop Power Control Algorithm for On-The-Move Terminal in Satellite Communication Systems)

  • 이호섭;박형원;윤원식
    • 한국정보통신학회논문지
    • /
    • 제18권9호
    • /
    • pp.2298-2306
    • /
    • 2014
  • 본 논문에서는 정지궤도 위성을 운용하는 위성통신환경에서 이동형 위성단말의 송신전력제어를 위한 개루프 전력제어 알고리즘을 제안한다. 제안하는 알고리즘은 위성체로부터 전송되는 비콘 신호를 기준으로 현재 위성채널 상태가 장애물에 의해 LOS가 제한되는 상황인지, 안테나의 위성추적 오차로 인해 발생되는 손실인지 판별한다. 판별된 신호감쇄 원인을 기준으로 안테나 위성추적 오차 시는 RF 출력을 멈추며, 장애물에 의한 채널 단절이 발생될 경우는 전력제어 없이 확산을 통해 데이터 수신 확률을 향상시킨다. 제안하는 알고리즘의 성능분석을 위해 인접위성 간섭 수준과 채널 아웃티지 확률을 분석하였으며, 분석결과 제안하는 알고리즘이 더 높은 성능을 보임을 확인하였다.