• 한국항공우주학회지
• /
• 제47권5호
• /
• pp.319-325
• /
• 2019

본 논문의 목적은 항공기에 장착되는 복합재 라미네이트 및 샌드위치구조를 가지는 레이돔에 대한 조류충돌해석을 수행하고 해석결과와 시험결과를 비교 및 분석하기 위함이다. 먼저 SPH(Smoothed Particle Hydrodynamics)법을 통해 물의 특성을 가지는 조류를 모델링하였으며, 조류충돌시험을 통해 조류가 충돌할 때의 속도를 입력하여 조류충돌해석을 수행하였다. 해석결과를 통해 레이돔의 파손 여부를 조사하고 최대 변형량을 시험결과와 비교하였으며 충돌과정에서의 압력변화추이가 기 연구되었던 결과와 일치함을 확인하였고, 이를 통해 수치해석모델의 신뢰성을 확보하였다. 또한 조류모델을 이루는 입자의 밀도가 레이돔의 파손 형상에 영향을 미친다는 사실을 확인하였다.

• Nuclear Engineering and Technology
• /
• 제54권1호
• /
• pp.326-342
• /
• 2022

Comparative analyses of a shield building subjected to a large commercial aircraft impact between decoupling method and coupling method are performed in this paper. The decoupling method is applying impact force time-history curves on impact area of the shield building to study impact damage effects on structure. The coupling method is using a model including aircraft and shield building to perform simulation of the entire impact process. Impact force time-history curves of the fuselage, wing and engine and their total impact force time-history curve are obtained by the entire aircraft normally impacting the rigid wall. Taking aircraft structure and impact progress into account some loading areas are determined to perform some comparative analyses between decoupling method and coupling method, the calculation results including displacement, plastic strain of concrete and stress of steel plate in impact area are given. If the loading area is determined unreasonably, it will be difficult to assess impact damage of impact area even though the accurate impact force of each part of aircraft obtained already. The coupling method presented at last in this paper can more reasonably evaluate the dynamic response of the shield building than the decoupling methods used in the current nuclear engineering design.

• Steel and Composite Structures
• /
• 제42권3호
• /
• pp.299-313
• /
• 2022

Steel-concrete-steel composite structures with bidirectional webs (SCSBWs) are used in large-scale projects and exhibit good mechanical performances and constructional efficiency. The shear behaviors of SCSBW deep beam members in key joints or in locations subjected to concentrated forces are of concern in design. To address this issue, experimental program is investigated to examine the deep-beam shear behaviors of SCSBWs, in which the cracking process and force transfer mechanism are revealed. Compared with the previously proposed truss model, it is found that a strut-and-tie model is more suitable for describing the shear mechanism of SCSBW deep beams with a short span and sparse transverse webs. According to the experimental analyses, a new model is proposed to predict the shear capacities of SCSBW deep beams. This model uses strut-and-tie concept and introduces web shear and dowel action to consider the coupled multi mechanisms. A stress decomposition method is used to distinguish the contributions of different shear-transferring paths. Based on case studies, a simplified model is further developed, and the explicit solution is derived for design efficiency. The proposed models are verified using experimental data, which are proven to have good accuracy and efficiency and to be suitable for practical application.

• Journal of Korea Trade
• /
• 제23권4호
• /
• pp.103-114
• /
• 2019

Purpose - This paper investigates the structure of exports across countries in terms of value added. Exports value added is examined under two categories, domestic and overseas. Using a statistical classification method by distance based on these two value added categories, this paper estimates the similarity of exports value added across countries including Korea. Design/methodology - The model of study is to employ a generalized distance function and then derive the Manhattan and Euclidean distances. The paper also performs cluster analysis using the Partitioning Around Medoids (PAM) and hierarchical methods to classify the 44 sample countries considered in this study. Findings - Our main findings are as follows. The 44 countries can be classified under 5 groups by their domestic and overseas value added in exports. Korea has a sandwich global value chains (GVCs) position between Japan, China, and Taiwan in the East Asian region. Originality/value - Existing papers point out the double counting problem of trade statistics as the intermediate goods trade across borders increases. This paper addresses the double counting problem by using the World Input-Output Table. The paper shows the need to explore the similarity of value added in exports structure across countries and investigate the GVCs position and role of each country.

• 항공우주시스템공학회지
• /
• 제16권6호
• /
• pp.64-73
• /
• 2022

페어링은 상용차가 주행 시 전면부에서 발생하는 유동박리의 저항을 제어하여 상용차 공기 저항력을 감소시키는 장치이다. 본 연구에서는 랭킨 반체 이론을 적용하여 3D페어링 형상을 설계하고 공력 해석을 통해 설계 결과를 검증하였다. 그리고 페어링의 구조적 안전성을 위해 상용차 과속조건과 돌풍 조건을 함께 고려하여 공력하중을 도출하였다. 이러한 공력 해석 결과를 기반으로 유리섬유/에폭시 복합재료를 적용하여 안전계수 3을 만족하는 페어링 구조 설계를 수행하였다. 최종 본 연구에서 가장 경량화된 페어링의 구조 해석을 수행하여 구조 안전성이 확인되었다.

• Composites Research
• /
• 제22권3호
• /
• pp.55-59
• /
• 2009

마이크로스트림 안테나는 가볍고 부피가 작을 뿐만 아니라 집적화가 가능하고, 표면 부착력이 탁월하여 많은 통신 시스템 안테나로 응용되고 있다. 안테나의 구조는 12.5GHz의 중심주파수를 갖는 사각 패치 마이크로 스트립 안테나로 설계하였고 곡률 방향으로 패치를 확장시켜 총 4개의 패치를 배열시켰다. 양쪽의 복합재료 사이에 허니컴을 삽입한 샌드위치 구조물이 되도록 설계한 다음 충격 실험을 실시하였다. 충격실험 후 안테나 성능변화를 측정한 결과 영향을 받지 않는다는 것을 확인하였다.

• 한국주조공학회지
• /
• 제21권3호
• /
• pp.187-191
• /
• 2001

가스분무장치를 이용하여 제조된 304 stainless steel 분말의 미세응고조직 특성을 투과전자현미경으로 관찰하였다. 분말이 sandwich 현상으로 존재하도록 구리로 전기도금한 후 tripod jig 를 이용하여 기계적 연마하여 TEM 시편을 제작하였다. 이 방법으로 제조된 TEM 시편은 넓은 지역에서 200KV 로 가속된 전자가 투과하기에 충분히 얇았으며, 작은 분말의 경우에는 분말 전체를 관찰할 수 있었다. 제한시야회절법(SADP)을 이용하여 100 ${\mu}m$ 이하 분말의 결정구조를 조사한 결과에 따르면 가스분무법으로 급냉응고된 대부분의 분말은 austenite 상으로 응고되었으며, 모든 austenite 분말은 크기에 관계없이 쌍정조직 (twinstructure)이 발견되었으며 그 밀도 역시 아주 높았다. 그러나 직경이 2 ${\mu}m$ 이하의 분말에서는 큰 과냉 (supercooling) 효과에 의하여 준결정상인 bcc 상으로 응고됨을 발견하였다.

• 항공우주시스템공학회지
• /
• 제6권4호
• /
• pp.7-11
• /
• 2012

Recently, the renewable energy has been widely used as a wind energy and solar energy resource due to lack and environmental issues of the mostly used fossil fuel. In this situation, the interest in wind power has been risen as an important energy source. For this blade a high efficiency wind turbine blade was designed with the proposing aerodynamic design procedure, and a light and low cost composite structure blade was designed considering fatigue life. Structural analyses including load case study, stress, deformation, buckling, fatigue life and vibration analysis were performed using the Finite Element Method.

• 대한기계학회논문집A
• /
• 제30권4호
• /
• pp.473-480
• /
• 2006

This paper explains analytical and experimental studies to evaluate the natural frequency of a composite carbody of Korean tilting train. The composite carbody with length of 23m was manufactured as a sandwich structure composed of 40mm-thick aluminium honeycomb core and 5mm-thick woven fabric carbon/epoxy face. From the finite element analysis, the 1st bending and 1st twisting natural frequency of the composite carbody were 11.67Hz and 14.4Hz, respectively. In order to verify the analytical results, the natural frequency measuring tests were performed. The measured 1st bending and twisting natural frequencies of the composite carbody were 10.25Hz and 11.0Hz, respectively. Both of these results satisfied the design requirement.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1990년도 추계학술대회 논문집 학회본부
• /
• pp.121-124
• /
• 1990

In this paper, we study the electrical conduction mechanism in Langmuir-Blodgett(LB) ultra thin films. The LB device was a metal/LB films/metal sandwich structure, where metal is electrode. In our experiments, the temperature depend on the current at above $0^{\circ}C$. This phenomena show that the electrical conduction current is a schottky current inherent to LB ultra thin films.