• Steel and Composite Structures
• /
• 제49권3호
• /
• pp.307-323
• /
• 2023

In this research, the study of the thermoelastic flexural analysis of silicon carbide/Aluminum graded (FG) sandwich 2D uniform structure (plate) under harmonic sinusoidal temperature load over time is presented. The plate is modeled using a simple two dimensional integral shear deformation plate theory. The current formulation contains an integral terms whose aim is to reduce a number of variables compared to others similar solutions and therefore minimize the computation time. The transverse shear stresses vary according to parabolic distribution and vanish at the free surfaces of the structure without any use of correction factors. The external load is applied on the upper face and varying in the thickness of the plates. The structure is supposed to be composed of "three layers" and resting on nonlinear visco-Pasternak's-foundations. The governing equations of the system are deduced and solved via Hamilton's principle and general solution. The computed results are compared with those existing in the literature to validate the current formulation. The impacts of the parameters (material index, temperature exponent, geometry ratio, time, top/bottom temperature ratio, elastic foundation type, and damping coefficient) on the dynamic flexural response are studied.

• Steel and Composite Structures
• /
• 제34권5호
• /
• pp.733-742
• /
• 2020

Vibration analysis in nanocomposite plate with smart layer is studied in this article. The plate is reinforced by carbon nanotubes where the Mori-Tanaka law is utilized for obtaining the effective characteristic of structure assuming agglomeration effects. The nanocomposite plate is located in elastic medium which is simulated by spring element. The motion equations are derived based on first order shear deformation theory and Hamilton's principle. Utilizing Navier method, the frequency of the structure is calculated and the effects of applied voltage, volume percent and agglomeration of Carbon nanotubes, elastic medium and geometrical parameters of structure are shown on the frequency of system. Results indicate that with applying negative voltage, the frequency of structure is increased. In addition, the agglomeration of carbon nanotubes reduces the frequency of the nanocomposite plate.

• 한국전산구조공학회논문집
• /
• 제32권5호
• /
• pp.333-340
• /
• 2019

모듈형 LNG Tank의 외조를 구성하는 SCP(sandwich concrete panel)에 대해서 중속충돌시험기로 충돌시험을 수행하고 이에 대한 수치해석을 수행하였다. 충돌시험에 사용된 시험체는 가로세로 각각 2m로 외조의 일반단면과 연결부단면의 특성을 가지도록 제작하였다. 51kg의 탄자를 설계기준에 규정된 충돌에너지를 갖도록 중속충돌시험기로 45m/sec로 이상의 속도로 가속하여 충돌시켰다. 이런 충돌시험을 두 차례 반복하고 시험체의 극한능력을 평가하기 위하여 충돌속도를 2배로 하여 충돌시켰다. 충돌시험의 수치해석 모델은 LS-DYNA를 이용하여 수행되었다. 외측의 강판와 그 사이의 충진콘크리트를 고체요소로 모델링하고 전단연결재는 보요소를 이용하여 모델링하였다. 강재의 재료모델은 탄소성 및 파단거동을 고려하였으며 콘크리트의 재료는 CSCM재료로 모델링하였다. 해석에서 전면부의 충돌변형은 시험에서 얻어진 변형과 유사한 값을 얻었으나 후면부의 변형은 시험결과와 다소 작은 값을 보였다. 일반부 단면에 대한 2배속 충돌시험에서는 전후면의 강판이 파손되었으나 해석결과에서는 전면부의 강판만 파손되었다. 수치해석에서 충돌에너지는 주로 충진 콘크리트로 전이되었는데 이는 이전 연구에서 보였던 고에너지를 가진 충돌의 경우와 다른 경향이다. 작성된 모델은 구조적으로 보수적인 결과를 보이므로 실제 설계에 적용할 수 있을 것으로 판단된다.

• 한국수산과학회지
• /
• 제33권1호
• /
• pp.55-59
• /
• 2000

무지개 송어의 뇌하수체 및 배양액에 존재하는 GTH II 농도를 측정하기 위해 Avidin- Biotin complex를 이용한 sandwich EIA 계을 개발했다. Protein A sepharose affinity chromatography을 통해서 얻어진 연어 GTH II의 rabbit IgG에 biotinylation시킨 것 (Biotin-salmon GTH II rabbit IgG)을 제2 항체로 사용하였고, Non-Biotin salmon GTH II rabbit IgG는 단지 protein A sepharose affinity chromatography에서 얻어진 IgG를 제 1 항체로 사용하였다. EIA는 sandwich법에 의해서 이루어졌으며, 효소반응 기질로는 TMB(3,3'5,5-tetramethylbenzidine)를 이용했으며, 반응후 450 nm의 흡광도에서 automatic microplate reader로 측정하였다. 그 결과, $0.12\;{\~}\;125\;ng/ml$의 범위에서 용량반응곡선을 얻었으며, 측정감도 (최소 검출량)는 거의 0.58 ng/ml 정도 였다. 그리고 뇌하수체 추출물 및 배양액 각각의 희석곡선은 GTH II 표존곡선과 일치 하였다. 또한 이러한 GTH II의 표준곡선는 뇌하수체내 다른 peptide hormone와는 교차반응을 거의 나타내지 않았다. Testosterone을 처리한 미성숙 무지개 송어의 뇌하수체 세포배양계를 이용하여 sGnRH에 의한 GTH II 분비량을 본 sandwich EIA계와 RIA계를 비교 조사한 결과, 거의 같은 분비량을 나타냈을 뿐만아니라 같은 분비 pattern을 나타냈다. 이러한 결과로부터 본 sandwich법 EIA계에 의해서 연어과 어류의 뇌하수체 추출물 및 뇌하수체 배양액 중의 GTH II 함량 및 분비량을 측정하는데 있어서 안정된 assay계라고 생각되어진다.

• Advances in nano research
• /
• 제9권4호
• /
• pp.237-250
• /
• 2020

An accurate plate theory for assessing sandwich structures is of interest in order to provide precise results. Hence, this paper develops Layer-Wise (LW) theory for reaching precise results in terms of buckling and vibration behavior of Functionally Graded Carbon Nanotube-Reinforced Composite (FG-CNTRC) annular nanoplates. Furthermore, for simulating the structure much more realistic, its edges are elastically restrained against in-plane and transverse displacement. The nano structure is integrated with piezoelectric layers. Four distributions of Single-Walled Carbon Nanotubes (SWCNTs) along the thickness direction of the core layer are investigated. The Differential Quadrature Method (DQM) is utilized to solve the motion equations of nano structure subjected to the electric field. The influence of various parameters is depicted on both critical buckling load and frequency of the structure. The accuracy of solution procedure is demonstrated by comparing results with classical edge conditions. The results ascertain that the effects of different distributions of CNTs and their volume fraction are significant on the behavior of the system. Furthermore, the amount of in-plane and transverse spring coefficients plays an important role in the buckling and vibration behavior of the nano-structure and optimization of nano-structure design.

• Steel and Composite Structures
• /
• 제23권5호
• /
• pp.529-541
• /
• 2017

In the present study, vibration analysis of functionally graded carbon nanotube reinforced composite (FGCNTRC) plate moving in two directions is investigated. Various types of shear deformation theories are utilized to obtain more accurate and simplest theory. Single-walled carbon nanotubes (SWCNTs) are selected as a reinforcement of composite face sheets inside Poly methyl methacrylate (PMMA) matrix. Moreover, different kinds of distributions of CNTs are considered. Based on extended rule of mixture, the structural properties of composite face sheets are considered. Motion equations are obtained by Hamilton's principle and solved analytically. Influences of various parameters such as moving speed in x and y directions, volume fraction and distribution of CNTs, orthotropic viscoelastic surrounding medium, thickness and aspect ratio of composite plate on the vibration characteristics of moving system are discussed in details. The results indicated that thenatural frequency or stability of FGCNTRC plate is strongly dependent on axially moving speed. Moreover, a better configuration of the nanotube embedded in plate can be used to increase the critical speed, as a result, the stability is improved. The results of this investigation can be used in design and manufacturing of marine vessels and aircrafts.

• Advances in nano research
• /
• 제9권4호
• /
• pp.295-307
• /
• 2020

The vibrational characteristics of Multi-Phase Nanocomposite (MPC) reinforced annular/circular plate under initially stresses are presented using the state-space formulation based on three-dimensional elasticity theory (3D-elasticity theory) and Differential Quadrature Method (DQM). The MPC reinforced annular/circular plate is under initial lateral stress and composed of multilayers with Carbon Nanotubes (CNTs) uniformly dispersed in each layer, but its properties change layer-by-layer along the thickness direction. The State-Space based Differential Quadrature Method (SS-DQM) is presented to examine the frequency behavior of the current structure. Halpin-Tsai equations and fiber micromechanics are used in the hierarchy to predict the bulk material properties of the multi-scale composite. A singular point is investigated for modeling the circular plate. The CNTs are supposed to be randomly oriented and uniformly distributed through the matrix of epoxy resin. Afterward, a parametric study is done to present the effects of various types of sandwich circular/annular plates on frequency characteristics of the MPC reinforced annular/circular plate using 3D-elasticity theory.

• Steel and Composite Structures
• /
• 제37권2호
• /
• pp.253-258
• /
• 2020

Vibration response in a sandwich plate with a nanocompiste core covered by magnetic layer is presented. The core is armed by functionalyy graded-carbon nanotubes (FG-CNTs) where the Mori-Tanaka law is utilized assuming agglomeration effects. The structure plate is located on elastic medium simulated by Pasternak model. The governing equations are derived based on Mindlin theory and Hamilton's principle. Utilizing diffrential quadrature method (DQM), the frequency of the structure is calculated and the effects of magnetic layer, volume percent and agglomeration of CNTs, elastic medium and geometrical parameters of structure are shown on the frequency of system. Results indicate that with considering magnetic layer, the frequency of structure is increased.

• 한국축산시설환경학회지
• /
• 제19권1호
• /
• pp.33-38
• /
• 2013

We conducted investigations of the information and welfare of broiler chickens in Korea. The livestock housing of all broiler chicken farms were windowless type, bell feeder and nipple waterer were used, and stocking density was relatively higher (ranging from 18.2 $birds/m^2$ to 24.2 $birds/m^2$) than RSPCA's welfare standards for chicken hens (less than 19 $birds/m^2$). The ratios of sandwich panel, urethane form, slate, and steel plate in roofing materials were 61%, 21%, 13%, and 5%, respectively. The ratios of sandwich panel, urethane form, brick, and steel plate in wall materials were 61%, 21%, 13%, and 5%, respectively. The ratios of soil and concrete in flooring materials were 10% and 90%. The mist spray, fan, and cooling pad in cooling facilities were 42%, 32%, and 26%, respectively. Thus we believe that present data contribute to develop the animal welfare certification for broiler chickens and to improve animal welfare in Korea.

• The Journal of the Acoustical Society of Korea
• /
• 제28권1E호
• /
• pp.9-15
• /
• 2009

In this paper, FSTL (Field Sound Transmission Loss) measured in a mock-up simulating ship cabins is studied. A mock-up is built by using 6 mm steel plate, and two identical cabins are made where 25 mm or 50 mm sandwich panel is used to construct wall and ceiling inside the steel structure. Various wall panels and ceilings are tested, where effects of wall and ceiling panel thickness, and presence of a unit toilet on FSTL are investigated. It is found that the effect of unit toilet on FSTL is at most 1 dB. From the comparison of FSTL for panels of the same thickness of 50 mm, it is observed that panel having inside air cavity of 10 mm shows higher STL than that of the panel without air cavity. Comparison of FSTL for panels of 50 mm and 25 mm thickness shows that dependency on surface density predicted by mass law is not observed. The sandwich panels act as a mass-spring system, which shows a resonant mode that cannot be explained by the mass law. It is also found that STL from laboratory test is higher than FSTL by 5- 10 dB, which can be explained by flanking structure-borne noise transmission path such as ceiling, floor and corridor-facing wall.