In general, when ships are designed, structural strength and fatigue strength must be verified based on the relative rules respectively. In case of Slurry Iron Sand Carrier designed to carry Iron-Sand saturated at water content, there is no special consideration of fatigue strength analysis. However, this vessel is similar to Ore Carrier in consideration of the overall characteristics of loaded cargo and the shape of cargo hold. Therefore we verified fatigue strength based on fatigue analysis procedure of ore carrier in DNV Rules and carried out the study for improving of fatigue strength of Slurry Iron Sand Carrier.
The purpose of this study is to evaluate the characteristic of the iron oxide carrier for removing arsenic contained in the groundwater. 4 types of iron oxide carrier used in the study is iron oxide coated sand carrier (IOCSC), iron oxide coated zeolite carrier (IOCZC), iron oxide plasticity carrier (IOPC) and platinum iron oxide plasticity carrier (PIOPC). The results of this study, IOPC is showed high arsenic adsorption strength and the maximum amount of adsorption than the IOCC. Based on the results of the arsenic adsorption characteristic, by using IOCC was conducted to column test. As a result, PIOPC is showed a high arsenic adsorption amount than IOPC, it was found that the time required to reach the breakthrough point is also extended. Therefore it is determined that stably compliance with water quality standards enhanced drinking water when using the PIOPC.
모래운반선은 호퍼도어를 갖는 경우 제한된 범위내에서 창구덮개의 설치를 면제 받을 수 있으나, 현재 국내에는 호퍼도어를 갖고 있는 선박이 단 한척도 없어 창구덮개를 면제받는 선박이 없는 실정이다. 따라서 모래운반선의 창구덮개 관련 현행 규정의 검토와 사고사례 조사 그리고 현재 운항하고 있는 모래운반선에 대한 설비현황, 복원성능 및 내항성능 평가를 통하여 모래운반선에 대한 창구덮개 면제 조건을 검토하였다. 그 결과, 모래운반선의 경우 창구덮개를 면제 받기 위해서는 화물창의 크기를 조정하여 모래를 화물창 상단부까지 가득 싣더라도 흘수가 만재흘수선을 넘지 않도록 하고, 적절한 풍우밀 조치를 취함으로써 충분한 예비 부력과 복원력 확보가 요구된다. 또한, 배수펌프의 용량은 화물창의 액상상태인 모래를 1시간 이내에 소성상태가 될 수 있도록 배수하기에 충분한 용량이어야 하며, 모든 운항상태에서 작동 가능하여야 한다. 본 연구는 모래운반선의 작업 특성상 창구덮개의 설치작업이 현실적으로 상당히 어렵고, 특히 기상악화시 인명사고로 이어질 수 있는 현실적인 문제점을 항해안전과 관련된 시설기준을 보다 강화함으로써 개선한 것이다.
Due to enhanced construction requirement, ready mixed concrete are being popular day by day. The current study aimed to develop ready mixed concrete using GBFS contained cement and determine its properties of fresh and hardened states. A real scale experiment was set up in a ready mixed plant for measuring workability and compressive strength. The workability was tested after mixing (within 5 minutes), 30, 60, 90, 120 and 150 minutes of the running of bulk carrier. The ready mixed carrier employed spinning motion i.e., rotating around its axis with 20 RPM and running on road with 1km/h speed. The mixing ratio of cement: sand:gravel, water to cement ratio, super plasticizer were, 1:1.73:2.47, 0.40 and 6% of cement, respectively. The chemical composition of raw material was determined using XRF and the properties of cements were measured according to ASTM standards. The experimental results confirm that the cement with composition of 6.89% of GBFS, 4% of Gypsum and 89.11% of clinker showed the good compressive strength and workability of concrete after 150 minutes of the spinning motion in bulk carrier.
본 연구는 '열매체 및 가스 순환형 열분해 시스템' 개발 목적으로 열분해 실험을 진행하기 전, 공정 모사용 기본 데이터 확보를 위해 수행되었다. 폐플라스틱 대체 물질로 폴리프로필렌(Polypropylene, PP)을 열분해 시료로 사용하였으며, 본 시스템에서 열전달 매체로 활용되는 유동사(이하 sand)를 사용하였다. 촉매 열분해 실험을 수행하기 위해 Mn계 물질(이하 Mn)을 촉매로 선택하였으며, sand에 담지하여 촉매 열분해 실험을 수행하였다. 열중량 분석기(Thermogravimetric analyzer, TGA)를 이용하여 PP의 기본 물성을 분석하였고, 질소 분위기 600℃ 조건에서 촉매 열분해를 통해 액상 오일을 생성하였다. 생성된 액상 오일은 GC/MS 분석을 통해 탄소 수 분포를 확인하였다. 본 연구에서는 Mn 담지 유무와 함량 변화에 따른 액상 오일 수율과 오일 내 탄화수소 분포에 미치는 영향을 조사하였다. Mn/sand를 이용하면 sand를 단독으로 활용한 열분해와 비교하여 잔여물이 감소하고 오일 수율이 증가하였다. 또한 Mn 함량 증가에 따라 액상 오일 내 C6~C9 범위 휘발유 비율이 점차 증가하였으며, 오일 내 C10보다 탄소 수가 큰 경유 및 heavy 오일 분포가 감소하는 것으로 확인되었다. 종합하면, Mn을 촉매로 활용하고 함량 변화를 통해 액상 오일 회수량을 증가시키고 생성물 내 휘발유 비율을 증가시킬 수 있을 것으로 판단하였다.
Atmospheric concentrations of persistent organic pollutants (POPs) were measured at Gosan, Jeju in November 2001 and spring 2002, each time for two weeks. Primary target pollutants were organochlorine pesticides, coplanar polychlorinated biphenyls (co- PCBs), and dioxin/furans listed in the Stockholm Convention adopted in May 2001. Polycyclic aromatic hydrocarbons (PAHs) were also measured in order to understand the overall characteristics of the POPs distribution as well as PM$_{2.5}$, a potent carrier of POPs. In the latter part of the measurement period of November 2001, almost every pollutant of combustion origin including dioxin/furans went high probably due to influence of emissions in the nearby area. The characteristics of atmospheric environment at Gosan in this period were rather close to urban areas far from those of a background area. A severe dust storm swept for three days at the end of the measurement period of spring 2002. However, changes in pollutant concentrations were relatively small except PM$_{10}$. Nevertheless, increases in particulate PAHs and OCDD (octachlorinated dibenzo-p-dioxins), mostly present in fine particles, were observed. Trends in organochlorine pesticide variations were mixed although possible volatilization of DDT residues from soil was inferred from the measurements of spring 2002.2.2.
International Journal of Naval Architecture and Ocean Engineering
/
제11권1호
/
pp.462-473
/
2019
The effects of the location and dimension of the gate, location, and volume of the feeder, application of a chill, chill volume, and heating method of the feeder with respect to the effect of the mold-designing technologies on the defect status of the products are described. It is possible to increase the solidification time of the feeder by heating feeder. Furthermore, the pressure generated from the feeder is imposed on a product, and this decreases the generation of shrinkage porosities. In this study, two types of gating and feeding systems had been proposed: the bottom L-type junctions and the top L-type junctions. Additionally, solidification behaviors, such as solidification time, shrinkage porosities, weight percentage of chill system to product, hot spot, and solidification time ratio (=Solidification time of feeder/solidification time of product), are extensively analyzed by using commercial casting simulation software. Based on the solidification behaviors, reasonable mold design, feeding system, critical feeder heating temperature, and solidification time ratios are proposed in the sand casting process for the fabrication of carrier housing in order to reduce the casting defects and to increase the recovery rate.
Butachlor를 유제(乳劑)와 입제(粒劑)로 제제화(製劑化)할 때 화학적(化學的) 안정성(安定性)과 약효(藥效)에 영향(影響)을 미치는 요인(要因) 중(中) 수분(水分), pH, 담체(擔體), 유화제(乳化劑) 및 유기용제등(有機溶劑等)으로 제제조성(製劑組成)을 달리 했을 때와 자외선조사시(紫外線照射時)의 주성분(主成分) 경시변화(經時變化)에 미치는 영향(影響)을 조사(調査)한 결과(結果)는 다음과 같았다. 제제형태(製劑形態)에 따른 경시변화율(經時變化率)은 암실보관시(暗室保管時)에는 제형(製形)에 상관(相關)없이 16시간(時間) 후(後)까지 안정(安定)하였으나 자외선조사시(紫外線照射時)에는 주성분(主成分) 분해율(分解率)이 유제(乳劑) > sand 피복입제(被覆粒劑) > zeolite 흡착입제(吸着粒劑)의 순(順)으로 나타났다. 물과 pH를 조절(調節)한 후(後)의 유탁액상태(乳濁液狀態)에서는 주성분(主成分)의 분해(分解)가 거의 일어나지 않았다. 유기용제(有機溶劑)로 유제(乳劑)를 조제(調劑)하여 $50^{\circ}C$에서 보관(保管)시킨 후(後)의 주성분(主成分) 분해율(分解率)은 극성유기용제(極性有機溶劑)인 benzene, xylene이 비극성유기용제(非極性有機溶劑)인 iso-propyl alcohol 보다 높은 것으로 나타났다. 유화제(乳化劑)의 종류(種類)에 따른 주성분(主成分) 분해율(分解率)은 Tween 60이 Hy-620C 및 Newkalgen-MC에 비(比)해 높게 나타났다.
The purpose of this study is to investigate previous data and possibility of the new culture building, insuring substantiality of the education in junior college, increasing of practical carrier, acquiring the money for practical class, and the direction of demand for education in a high level of industrial society. There's two parts to consist of investigation and the model case in wedding business in Junior college. The research groups in one part consist of 277 students in Junior college. The result were as follows: 1) The students would like to get the wedding business in new culture building. (72%) 2) The student shave got a idea to recommend to use the wedding facilities for their for their relative sand friends. (51%) 3) The trend of selecting in wedding facilities is outside than inside of facilities. (75%) 4) They would like to have the buffet service after wedding celemony, not a la carte for choose the meal. The above research data suggest that if the wedding facility's management would be accept, we could have expectation about development of junior college, emphasis of practical education and good wedding culture in this areas. For the most of student, they has a righ hand to manage the wedding facility in their college. First, the culinary students could have an experience of service practies to the customer in wedding celemony, as the result of training will be great. Second, the college could show their vision and hope to customer to interest it. Third, it can be supplied the right wedding culture and the wedding facilities which is low price and good circumstance for wedding. Fourth, it's very resonable to use the culture facilities during no class, Saturday and Sunday. Fifth, income from business can be used only a scholarship and a community development. Sixth, it can be induced the self-participication and motivation to take up a positive attitude for their life.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.