• 제목/요약/키워드: Sand addition

검색결과 697건 처리시간 0.029초

원심모형 실험을 이용한 압입말뚝에 대한 동적 p-y 곡선 산정 (Development of Dynamic p-y Curve for Jacked Pile by Centrifuge Test)

  • 유민택;권선용;이일화
    • 한국지반공학회논문집
    • /
    • 제32권3호
    • /
    • pp.39-47
    • /
    • 2016
  • 본 연구에서는 말뚝 설치 방법에 따른 동적 p-y 곡선의 차이를 분석하기 위하여, 1g 상태에서 지반 조성 전 설치한 말뚝과 지반 조성이 완료된 후에 1g 상태에서 압입하여 설치한 말뚝, 그리고 40g의 원심 가속도 조건에서 압입시킨 말뚝에 대해 동적 원심모형 실험을 수행하였다. 실험 결과로부터 얻은 각 모형 말뚝의 동적 p-y 곡선의 최대지반반력을 이용하여 동적 p-y 중추곡선(Backbone curve)을 쌍곡선 함수로 나타내었다. 말뚝 설치 방법에 따른 동적 p-y 중추곡선 분석 결과, 40g 조건에서 압입한 말뚝이 1g 상태에서 압입한 말뚝 및 지반 조성 전 설치 말뚝에 비해 말뚝에 작용하는 지반반력이 크게 평가되었으며, 이러한 지반반력의 차이는 깊이가 깊어질수록 작아지는 것으로 나타났다. 일련의 p-y 곡선 결과를 바탕으로 기존에 제안된 현장타설말뚝에 대한 동적 p-y 중추곡선의 적용성을 평가하고, 이를 수정한 압입 및 항타 말뚝에 대한 동적 p-y 곡선 산정식을 개발하였다.

Effect of pile group geometry on bearing capacity of piled raft foundations

  • Fattah, Mohammed Y.;Yousif, Mustafa A.;Al-Tameemi, Sarmad M.K.
    • Structural Engineering and Mechanics
    • /
    • 제54권5호
    • /
    • pp.829-853
    • /
    • 2015
  • This is an experimental study to investigate the behaviour of piled raft system in different types of sandy soil. A small scale "prototype" model was tested in a sand box with load applied to the foundation through a compression jack and measured by means of load cell. The settlement was measured at the raft by means of dial gauges, three strain gauges were attached on piles to measure the strains and calculate the load carried by each pile in the group. Nine configurations of group ($1{\times}2$, $1{\times}3$, $1{\times}4$, $2{\times}2$, $2{\times}3$, $2{\times}4$, $3{\times}3$, $3{\times}4$ and $4{\times}4$) were tested in the laboratory as a free standing pile group (the raft not in contact with the soil) and as a piled raft (the raft in contact with the soil), in addition to tests for raft (unpiled) with different sizes. It is found that when the number of piles within the group is small (less than 4), there is no evident contribution of the raft to the load carrying capacity. The failure load for a piled raft consisting of 9 piles is approximately 100% greater than free standing pile group containing the same number of piles. This difference increases to about 4 times for 16 pile group. The piles work as settlement reducers effectively when the number of piles is greater than 6 than when the number of piles is less than 6. The settlement can be increased by about 8 times in ($1{\times}2$) free standing pile group compared to the piled raft of the same size. The effect of piled raft in reducing the settlement vanishes when the number of piles exceeds 6.

The strength properties of alkali-activated silica fume mortars

  • Saridemir, Mustafa;Celikten, Serhat
    • Computers and Concrete
    • /
    • 제19권2호
    • /
    • pp.153-159
    • /
    • 2017
  • In this study, the strength properties of alkali-activated silica fume (SF) mortars were investigated. The crushed limestone sand with maximum size of 0-5 mm and the sodium meta silicate ($Na_2SiO_3$) used to activate the binders were kept constant in the mortar mixtures. The mortar specimens using the replacement ratios of 0, 25, 50, 75 and 100% SF by weight of cement together with $Na_2SiO_3$ at a constant rate were produced in addition to the control mortar produced by only cement. Moreover, the mortar specimens using the replacement ratio of 4% titanium dioxide ($TiO_2$) by weight of cement in the same mixture proportions were produced. The prismatic specimens produced from eleven different mixtures were de-moulded after a day, and the wet or dry cure was applied on the produced specimens at laboratory condition until the specimens were used for flexural strength ($f_{fs}$) and compressive strength ($f_c$) measurement at the ages of 7, 28 and 56 days. The $f_{fs}$ and $f_c$ values of mortars applied the wet or dry cure were compared with the results of control mortar. The findings revealed that the $f_c$ results of the alkali activated 50% SF mortars were higher than that of mortar produced with Portland cement only. It was found that the $f_{fs}$ and $f_c$ of alkali-activated SF mortars cured in dry condition was averagely 4% lower than that of alkali-activated SF mortars cured in wet condition.

GPR 탐사방법을 이용한 유류오염물질(LNAPL) 탐지 (LNAPL Detection with GPR)

  • 김창렬
    • 한국지구물리탐사학회:학술대회논문집
    • /
    • 한국지구물리탐사학회 2001년도 정기총회 및 제3회 특별지포지움
    • /
    • pp.94-103
    • /
    • 2001
  • 유기 석유화학 오염 물질인 휘발유가 지하 분포 시, 지하수면 위 토양 매질(vadose zone)내에 존재할 수 있는 기체 상태(vaporphase)와, 지하수면의 상승 또는 하강에 의해 분포 할 수 있는 residual phase의 유류 오염 물질이 GPR에 미치는 반응을 조사하기 위하여 모래와 자갈을 토양 매질로서 채운 탱크를 이용한 모델 실험이 수행되었다. 물만 사용하여 지하수면의 상승과 하강을 유도한 후, 석유 수송을 위하여 지하에 매장된 파이프 혹은 석유저장을 위한 지하 탱크로부터 지하수면으로의 유류 오염을 simulation하기 위하여 모델 탱크바닥을 통하여 휘발유가 주입되었다. 본 연구 결과, 수분 함량에 따른 GPR의 민감성과 지하수면의 변화 관측에의 GPR 효율성이 입증되었다. 또한, 휘발성 유류 오염 물질의 기체상태가 vadose zone에 분포 시 GPR를 이용하여 탐지할 수 있는 가능성과, 지하수면의 상승에 의해 지하수면 밑의 물로 포화된 토양(water saturated zone)에 분포할 수 있는 residual phase의 유류 오염 물질의 탐지 가능성이 모델 실험을 통하여 확립되었다 그리고, residual phase의 유류 오염 물질이 지하수면 아래에 분포하는 오염지역에서 GPR을 이용한 유류 오염물질을 탐지할 수 있는 새로운 탐사전략이 제시되었다.

  • PDF

1-G 진동대 실험을 이용한 시트파일 보강재의 액상화 및 피해 방지 효과 (Liquefaction Prevention and Damage Reduction Effect of Reinforcement by Sheet Pile Using 1-G Shaking Table Test)

  • 심성훈;윤종찬;손수원;김진만
    • 한국지진공학회논문집
    • /
    • 제24권5호
    • /
    • pp.211-217
    • /
    • 2020
  • Earthquake preparedness has become more important with recent increase in the number of earthquakes in Korea, but many existing structures are not prepared for earthquakes. There are various types of liquefaction prevention method that can be applied, such as compaction, replacement, dewatering, and inhibition of shear strain. However, most of the liquefaction prevention methods are applied before construction, and it is important to find optimal methods that can be applied to existing structures and that have few effects on the environment, such as noise, vibration, and changes in underground water level. The purpose of this study is to estimate the correlation between the displacement of a structure and variations of pore water pressure on the ground in accordance with the depth of the sheet file when liquidation occurs. To achieve this, a shaking table test was performed for Joo-Mun-Jin standard sand and an earth pressure, accelerometer, pore water pressure transducer, and LVDT were installed in both the non-liquefiable layer and the liquefiable layer to measure the subsidence and excess pore water pressure in accordance with the time of each embedded depth. Then the results were analyzed. A comparison of the pore water pressure in accordance with Hsp/Hsl was shown to prevent lateral water flow at 1, 0.85 and confirmed that the pore water pressure increased. In addition, the relationship between Hsp/Hsl and subsidence was expressed as a trend line to calculate the expected settlement rate formula for the embedded depth ratio.

낙동강 수계 표층 퇴적물의 중금속 분포와 오염도 (Distribution and Pollution of Heavy metals in Surface sediments from Nakdong River)

  • 김신;김주언;이권철;이규열;전혜린;유재정;이인정;안정민
    • 한국환경과학회지
    • /
    • 제24권8호
    • /
    • pp.969-980
    • /
    • 2015
  • In order to certificate the distribution and pollution of heavy metal of surface sediments in Nakdong River were collected and analyzed for grain size, water content, ignition loss and heavy metal content. Surface sediments mainly composed of sand(avg. 94.6%) and water content and ignition loss were 20.46%, 1.53% on average. Grain size were relatively fine and organic matter content were relatively high in the Hoichun and Sunakdonggang. Most of heavy metal content(Zn > Cr > Pb > Ni > Cu > Hg) in the Deokcheongang and Sunakdonggang were higher than the other streams. The Igeo were non polluted(less than 0) in all streams and the EF were relatively high in the small stream and PLI were non polluted(less than 1). In addition, organic matter, heavy metal content and pollution were highly correlation with grain size. Surface sediments in study area, heavy metal pollution of the Sunakdonggang were relatively high compared to the other stream but these results were not serious pollution that exceed the sediment pollution evaluation standard of river and lake in Korea and pollution levels adversely affected the majority of benthos were not.

현장 품질관리를 고려한 경량골재 콘크리트의 시방서 개정안에 대한 고찰 (Proposals for Revision of Lightweight Aggregate Concrete Specifications Based on In-situ Quality Control on Concrete)

  • 이경호;양근혁
    • 한국건축시공학회지
    • /
    • 제18권3호
    • /
    • pp.211-218
    • /
    • 2018
  • 이 연구에서는 국내산 인공 경량골재를 사용한 콘크리트의 실험결과를 바탕으로 콘크리트 표준시방서의 관련내용에 대한 합리성 및 개정의 필요성을 평가하였다. 국내 표준시방서의 내용은 ACI 211.2, ACI 213, ACI 301, JASS 5 및 CEB-FIP 시방내용들과 비교하였다. 국내산 인공 경량 잔골재의 연속적 입도분포를 위해서는 최대직경 2.5mm 이하의 천연모래 혼입이 요구되었다. 경량골재 콘크리트의 재료분리 및 과도한 블리딩을 제어하기 위해서는 현재 시방서에서 제시된 최대 물-결합재비와 단위수량에 대한 수정이 요구되었다. 특히, 배합 목표성능인 초기 슬럼프, 28일 압축강도, 공기량 및 기건 단위용적중량에 대해 경량골재 콘크리트의 합리적인 배합설계 절차의 확립이 요구되었다. 결과적으로 콘크리트 표준시방서는 국내산 인공 경량골재의 특성을 고려하여 전반적이 개정이 요구되었다.

섬진강 하구역 잘피(Z. marina)서식지의 해양환경 특성 (Marine Environmental Characteristics of Seagrass Habitat in Seomjin River Estuary)

  • 지형석;서희정;김명원;이문옥;김종규
    • 한국해양공학회지
    • /
    • 제28권3호
    • /
    • pp.236-244
    • /
    • 2014
  • This study considered a seagrass habitat in order to analyze the characteristics of a marine environment of seagrass located in the Seomjin river estuary, through an analysis of the distribution of the water depth, field observation, and three-dimensional numerical experiments using an EFDC model. The seagrass habitat was usually distributed at D.L(-) 0.5~0.0 m, and was hardly seen in the intertidal zone higher than that range. The distribution of the water temperature was within the range of $7.0{\sim}23.2^{\circ}C$, and the seagrass was demonstrated to have a strong tolerance to changes in the water temperature. In addition, the salinity distribution was found to be 27.2~31.0 psu, with suspended solids of 32.1 mg/L, which were higher than the previous research results (Huh et al., 1998), implying that there may be a reduction in the amount of deposits caused by the suspended solids. As for the sedimentary facies, they were comprised of 62.7% sand, 19.1% silt, and 18.2% clay, indicating that the arenaceous was superior and the sedimentary facies were similar to that of Dadae Bay. According to a numerical experiment, the maximum tidal current was 75 cm/s, while the tidal residual current was 10 cm/s, confirming that it sufficiently adapted to strong tidal currents. The erosion and deposition are predicted to be less than 1.0 cm/year. Thus, it is judged that the resuspension of sediments due to tidal currents and the changes in sedimentary facies are insignificant.

해운대 해빈에서 특정 외력하의 표사이동 특성 (Characteristics of Sediment Transport under External Force in Haeundae Beach)

  • 김권수;유하상;박형수;김강민
    • 한국항해항만학회지
    • /
    • 제37권6호
    • /
    • pp.663-671
    • /
    • 2013
  • 해운대 해수욕장은 육지로부터 유입되는 모래 공급원의 감소와 고파랑 및 반사파 등의 영향으로 백사장의 폭이 매년 감소하는 것으로 나타났다. 표사이동에 따른 해빈변형 문제를 해결하기 위해서는 해빈류의 특성을 예측할 필요가 있다. 본 연구에서는 해운대 해수욕장에 대한 장기적이고 종합적인 관측자료를 바탕으로, 계절별 대표파랑과 이상파에 대한 해빈류 및 표사이동 수치실험을 실시하였다. 여름에는 평상파 및 S계열 파랑에 의해서 해빈류는 연안을 따라 동쪽으로 흘러 미포측에서 퇴적되는 양상을 보이고, 겨울에는 평상파 및 E 계열의 파랑에 의해 해빈류는 서향하여 동백섬 인근에서 퇴적양상을 보이고 있다. 50년빈도 고파랑 내습시 SSW 파랑은 해운대 중앙에서 이안류가 발생하고, ESE 파랑은 미포측에서 연안을 따라 서측으로 흐름을 발생시키는 것으로 나타났다.

Direct Horizontal-Flow Roughing Filtration의 조립 여상에서의 입자 제거 모델링 (Modeling of Particle Removal in the Coarse Media of Direct Horizontal-Flow Roughing Filtration)

  • 안효원;박노석;이선주;이경혁;왕창근
    • 상하수도학회지
    • /
    • 제19권3호
    • /
    • pp.338-347
    • /
    • 2005
  • Horizontal-Flow Roughing Filtration (HRF) is one of altemative pretreatment methods e.g. prior to Slow Sand Filtration (SSF). However, some of its limitations are that the effluent quality drops drastically at higher turbidity (>200 NTU) and at higher filtration rate (>1 m/h). To overcome these drawbacks, we suggested Direct Horizontal-Flow Roughing Filtration (DHRF), which is a modified system of Horizontal-Flow Roughing (HRF) by addition of low dose of coagulant prior to filtration. In this study to optimize the DHRF configuration, a conceptual and mathematical model for the coarse compartment has been developed in analogy with multi-plate settlers. Data from simple column settling test can be used in the model to predict the filter performance. Furthermore, the model developed herein has been validated by successive experiments carried out. The conventional column settling test has been found to be an handy and useful to predict the performance of DHRF for different raw water characteristics (e.g. coagulated or uncoagulated water, different presence of organic matter, etc.) and different inital process conditions (e.g. coagulant dose, mixing time and intensity, etc.). An optimum filter design for the coarse compartment (grain size 20mm) has been found to be of 3 m/h filtration rate with filter length of 4-4.5 m.