• Journal of Biomedical Engineering Research
• /
• v.19 no.2
• /
• pp.143-152
• /
• 1998

In this paper, we present the performances of a Doppler system using single channel RF(Radio Frequency) sampling. This technique consists of undersampling the ultrasonic blood backscattered RF signal on a single channel. Conventional undersampling method in Doppler imaging system have to use a minimum of two identical parallel demodulation channels to reconstruct the multigate analytic Doppler signal. However, this system suffers from hardware complexity and problem of unbalance(gain and phase) between the channels. In order to reduce these problems, we have realized a multigate pulsed Doppler system using undersampling on a single channel, It requires sampling frequency at $4f_o$(where $f_o$ is the center frequency of the transducer) and 12bits A/D converter. The proposed " single-Channel RF Sampling" method aims to decrease the required sampling frequency proportionally to $4f_o$/(2k+1). To show the influence of the factor k on the measurements, we have compared the velocity profiles obtained in vitro and in vivo for different intersequence delays time (k=0 to 10). We have used a 4MHz center frequency transducer and a Phantom Doppler system with a laminar stationary flow. The axial and volumetric velocity profiles in the vessel have been computed according to factor k and have been compared. The influence of the angle between the ultrasonic beam and the flow axis direction, and the fluid viscosity on the velocity profiles obtained for different values of k factor is presented. For experiment in vivo on the carotid, we have used a data acquisition system with a sampling frequency of 20MHz and a dynamic range of 12bits. We have compared the axial velocity profiles in systole and diastole phase obtained for single channel RF sampling factor.ng factor.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2003.05b
• /
• pp.49-50
• /
• 2003

To know the properties of single aerosol particle is an essential prerequisite for understanding its chemical reactions in the atmosphere. Single particle analysis has the advantage of providing a great amount of information that cannot otherwise be obtained using methods of bulk analysis. And single particle analysis needs the short sampling time and the small sampling mass for analysis. This allows for a better determination of the temporal variation of the component concentrations in aerosol particles. (omitted)

• Communications for Statistical Applications and Methods
• /
• v.10 no.3
• /
• pp.665-678
• /
• 2003

In this paper we suggest the new calibration estimator, which is called to the recalibration estimator, and its variance estimator using two-phase sampling technique according to the auxiliary information having strong correlation with the variable of interest under the unit nonresponse. In this unit nonresponse situation, an available information may exists at the level of whole population or the first-phase sample. The proposed recalibration estimator derives from the first and second phase weights respectively.

• 제어로봇시스템학회:학술대회논문집
• /
• 1993.10a
• /
• pp.471-476
• /
• 1993

In this paper we proposed the digital implementation of an $H^{\infty}$-optimal controller using lifting technique and $H^{\infty}$-control theory. The discrete controller is obtained through iterative adjustment of sampling time and weighting function, which can ber performed by computing the L$_{2}$-induced input to output norm of the sampled-data system with bandlimited exogenous input. The resulting sampled-data bandlimited exogenous input. The resulting sampled-data system is stable and the performance including inter-sampling behaviour of the hybrid system can be also optimized.d.

• Communications for Statistical Applications and Methods
• /
• v.19 no.6
• /
• pp.751-759
• /
• 2012

This paper proposes an alternative stratified randomized response model based on the model of Singh and Joarder (1997). It is shown numerically that the proposed stratified randomized response model is more efficient than Hong et al. (1994) (under proportional allocation) and Kim and Warde (2004) (under optimum allocation).

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.05a
• /
• pp.776-779
• /
• 2008

It is expect that Microarray technique be direct classification and diagnosis of Genetic data have abnomal data value because DNA technique. It is necessary that many noses that is abnomal data in sampling genetic data. So in this paper reported sampling method in exiting study then suggests new data classific system and modeling method using EP by Matlab about three dataset.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.19 no.6
• /
• pp.1529-1538
• /
• 1995

In this study, a liquid sheet type co-axial nozzle has been used to investigate the turbulent atomization characteristics which could result in the experimental data to be used in designing a jet nozzle with high performance. Image processing technique and immersion sampling method were employed to measure droplet size. In atomizing characteristics, droplet size distributions and absolute droplet sizes, SMD(Sauter Mean Diameter) have been investigated in the wide ranges of flow field depending upon the air-water mass ratios. And the comparisons between the present data and the semi-empirical curves have been conducted semi-empirical correlation for SMD has been derived in the present analysis.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.686_687
• /
• 2009

The traceability maintenance system for the AC voltage and current has been developed at the frequency range of 20 Hz to 100 Hz without using any compensation technique which is used at thermal converter (TC) ac-dc transfer system at low frequencies. The system uses a digital voltmeter (DVM) as a data acquisition system of the input waveform and stored data in memory. The developed algorithm acquires and processes the sampling data to calculate the root mean square (rms) value of the input voltage of DVM which operates at DC 10 V range for better accuracy. The best uncertainty of the AC voltage measurements is $3 {\mu}V/V$ within the frequency range. The best uncertainty of the AC current measurements is better than the $5 {\mu}A/A$ and mainly depend on the current to voltage converter, ac-dc current shunt or Current Transformer (CT), used for the measurement

• Proceedings of the Korea Society for Simulation Conference
• /
• 2001.10a
• /
• pp.325-328
• /
• 2001

This paper introduces a new technique to extract eigenvalues of the gain and phase offsets and to compensate them automatically in transducerless sampling RTU. It discusses in detail the cause of the offsets, describes the principles of gain and phase compensation, establishes the algorithm to extract eigenvalues. The process of using the compensated measurements is also illustrated in the paper. This technique enhances the operational speed, simplifies the operational complexity, and improves the capability of transducerless sampling in RTU.

• Water Engineering Research
• /
• v.3 no.4
• /
• pp.215-234
• /
• 2002

Uncertainty in dam breach flood routing results was analyzed in order to provide the basis fer the investigation of their effects on the flood damage assessments and dam safety risk assessments. The Monte Carlo simulation based on Latin Hypercube Sampling technique was used to generate random values for two uncertain input parameters (i.e., dam breach parameters and Manning's n roughness coefficients) of a dam breach flood routing analysis model. The flood routing results without considering the uncertainty in two input parameters were compared with those with considering the uncertainty. This paper showed that dam breach flood routing results heavily depend on the two uncertain input parameters. This study indicated that the flood damage assessments in the downstream areas can be critical if uncertainty in dam breach flood routing results are considered in a reasonable manner.