• Water Engineering Research
• /
• 제3권1호
• /
• pp.31-44
• /
• 2002

The effect of diurnal cycle, intermittent visit of observation satellite, sensor installation, partial coverage of remote sensing, heterogeneity of soil properties and precipitation to the soil moisture estimation error were analyzed to present the global sampling strategy of soil moisture. Three models, the theoretical soil moisture model, WGR model proposed Waymire of at. (1984) to generate rainfall, and Turning Band Method to generate two dimensional soil porosity, active soil depth and loss coefficient field were used to construct sufficient two-dimensional soil moisture data based on different scenarios. The sampling error is dominated by sampling interval and design scheme. The effect of heterogeneity of soil properties and rainfall to sampling error is smaller than that of temporal gap and spatial gap. Selecting a small sampling interval can dramatically reduce the sampling error generated by other factors such as heterogeneity of rainfall, soil properties, topography, and climatic conditions. If the annual mean of coverage portion is about 90%, the effect of partial coverage to sampling error can be disregarded. The water retention capacity of fields is very important in the sampling error. The smaller the water retention capacity of the field (small soil porosity and thin active soil depth), the greater the sampling error. These results indicate that the sampling error is very sensitive to water retention capacity. Block random installation gets more accurate data than random installation of soil moisture gages. The Walnut Gulch soil moisture data show that the diurnal variation of soil moisture causes sampling error between 1 and 4 % in daily estimation.

• 한국군사과학기술학회지
• /
• 제15권4호
• /
• pp.435-441
• /
• 2012

This paper provides simulation-based results of effect analysis of sample size and sampling periods on accuracy of reliability estimation methods using multiple comparisons with analysis of variance. Sum of squared errors in estimated reliability measures were evaluated through applying seven estimation methods for one-shot systems to simulated quantal-response data. Analysis of variance was implemented to investigate change in these errors according to variations of sample size and sampling periods for each estimation method, and then the effect analysis on accuracy in reliability estimation was performed using multiple comparisons based on sample size and sampling periods. An efficient way to allocate both sample size and sampling periods for reliability estimation tests of one-shot systems is proposed in this paper from the effect analysis results.

• 한국조사연구학회지:조사연구
• /
• 제6권2호
• /
• pp.1-32
• /
• 2005

출구조사에서 투표소 추출방법은 출구조사의 정확성을 결정하는 중요한 요소이다. 본 연구에서는 대표구 추출법을 대신할 수 있는 정렬계통추출법을 제안하고 그 활용 가능성 및 효율성을 분석한다. 아울러 제시된 정렬계통추출법을 사용하는 경우 추정량의 표본추출오차(sampling error)가 어느 정도 되며, 원하는 목표 오차를 만족하기 위한 표본크기를 결정하는 문제를 고려한다. 2004년 17대 총선 개표자료를 토대로 경험적인 분석을 통해 제시된 정렬계통추출법이 기존의 대표구 추출법에 비해 평균예측오차 관점에서 효율적이라는 사실을 규명하고, 기존의 출구조사에서 표본크기 및 추정오차를 해석하는 과정에서 발생하는 오류를 집락효과를 이용해 설명했다. 아울러 제안한 정렬추출법에서 얻어지는 추정량의 분산을 구하고, 설계효과 개념을 이용해 표본크기 결정문제를 다루었다.

• Nuclear Engineering and Technology
• /
• 제47권5호
• /
• pp.546-558
• /
• 2015

Chord length sampling method in Monte Carlo simulations is a method used to model spherical particles with random sampling technique in a stochastic media. It has received attention due to the high calculation efficiency as well as user convenience; however, a technical issue regarding boundary effect has been noted. In this study, after analyzing the distribution characteristics of spherical particles using an explicit method, an alternative chord length sampling method is proposed. In addition, for modeling in finite media, a correction method of the boundary effect is proposed. Using the proposed method, sample probability distributions and relative errors were estimated and compared with those calculated by the explicit method. The results show that the reconstruction ability and modeling accuracy of the particle probability distribution with the proposed method were considerably high. Also, from the local packing fraction results, the proposed method can successfully solve the boundary effect problem. It is expected that the proposed method can contribute to the increasing of the modeling accuracy in stochastic media.

• 한국해양환경ㆍ에너지학회지
• /
• 제16권1호
• /
• pp.36-41
• /
• 2013

이 논문에서는 시계열의 파랑자료를 시뮬레이션 하여 파랑계측에서 sampling rate가 파랑자료의 각종 통계적 특성에 미치는 영향을 살펴보았다. 파랑자료의 Sampling rate가 freak wave와 같은 극한파의 통계특성에 미치는 영향을 파악하기 위하여, 이상(AI)지수, 파형의 첨도(kurtosis) 그리고 최대파고 등의 변화를 살펴보았다. Sampling rate가 커지면 각종 파고의 크기가 줄어드는 경향을 보인다. Sampling rate가 커지면 파랑스펙트럼의 0차 모멘트는 큰 변화가 없지만 2차 모멘트는 큰 영향을 받아서, Tz는 과대평가되고 대역폭은 과소평가된다. 따라서 sampling rate변화에 따른 유의파고 크기의 오차는 스펙트럼법에 의한 유의파고 $H_s$가 개별파법에 의한 유의파고 $H_{1/3}$ 보다 작게 나타난다. Sampling rate에 의해서 발생한 오차의 크기는 파랑의 주기가 커지면 줄어드는 경향을 보인다. 파형의 첨도와 AI지수는 sampling rate가 1 Hz 이상인 경우는 큰 오차를 주지 않는다. 일반적으로 freak wave와 같은 극한파가 포함된 파랑을 계측할 때, 1 Hz의 이상의 samping rate로 계측한 해양파의 자료를 사용한다면 sampling rate가 최대파고의 크기의 미치는 오차가 5% 이하가 될 것으로 예상된다.

• Journal of Power Electronics
• /
• 제11권1호
• /
• pp.59-63
• /
• 2011

This paper presents the modeling of the sampling effect in the p-type average current mode control. The prediction of the high frequency components near half of the switching frequency in the current loop gain is given for the p-type average current mode control. By the proposed model, the prediction accuracy is improved when compared to that of conventional models. The proposed method is applied to a buck converter, and then the measurement results are analyzed.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집B
• /
• pp.404-409
• /
• 2000

Growth characteristics of silica particles have been studied experimentally using in situ sampling technique from $H_2/O_2TEOS$ diffusion flame with carefully devised sampling probe. Verification of sampling result was done through new method and effects of flame condition and TEOS flow rate on growth characteristics of silica particles were investigated. By comparing particles sampled by thermophoretic sampling in flame with those by collector sampling after probe, particles do not change before and after probe sampling, which was clearly proved from the fact that the result of TEM image analysis makes good agreement with that of SMPS measurement. As flame temperature increases, the effect of coalescence or sintering becomes important mechanism during growth of silica particles, resulting in canceling the effect of coagulation, which makes mean diameter of silica particles increase slowly. With increase in TEOS flow rate, the number concentration of generated silica particle increases but residence time of particles in flame decreases. As a result, there exists upper limit to which the diameter of silica particle increases under same flame condition.

• 응용통계연구
• /
• 제32권4호
• /
• pp.643-652
• /
• 2019

본 연구에서는 반복조사의 표본재설계에서 설계요소를 반영한 표본수 결정 방법을 제안하였다. 제안된 방법은 다단추출과 층화다단추출 등에 적용할 수 있으며 시점간 모집단 구성 변화, 집락효과, 표본할당 등의 주된 설계요소가 갖는 표본오차에 대한 영향력을 구분하여 반영하므로 보다 전략적인 표본수 결정이 가능할 수 있다.

• 대한수학회논문집
• /
• 제13권1호
• /
• pp.181-193
• /
• 1998

The Shannon sampling series is the prototype of an interpolating series or sampling series. Also the Shannon wavelet is one of the protypes of wavelets. But the coefficients of the Shannon sampling series are different function values at the point of discontinuity, we analyze the Gibbs phenomenon for the Shannon sampling series. We also find a way to go around this overshoot effect.

• 동아시아경상학회지
• /
• 제8권3호
• /
• pp.37-42
• /
• 2020

Purpose - Research on the mechanism by which tasting affects the purchase of related products and related products is still insufficient. Therefore, it is necessary to make good use of marketing practically how tasting affects taste and leads to consumption behavior. Research design, data, and methodology - First, we provide tasting sampling for people with different impulsive purchasing tendencies and check whether this leads to purchasing behavior in the future. Second, it is necessary to measure 'face (or notion of courtesy)', which is a characteristic of Koreans, as a moderating variable for the effect of sampling. Third, it is proposed to look at how the effect of sampling appears differently over time. Results - First, it is necessary to pay attention to the factors influencing the sampling effect in the product group that cannot produce a tasting situation such as general food or beverage. Second, research results may not apply to all actual marketing. Conclusions - This study is judged to have contributed to resolving the question of whether the distribution store's tasting promotion is more effective and lasts longer than other promotions. It also suggested the possibility that the effect of tasting could be changed depending on whether the amount of tasting was limited or the subjects of tasting.