• Journal of Electrical Engineering and Technology
• /
• v.10 no.2
• /
• pp.641-646
• /
• 2015

In this paper, a zinc electrowinning cell is fully optimized to achieve a uniform current distribution at electrode surfaces. To effectively deal with an electromagnetically coupled problem with multi-dimensional design variables, a sampling-based sensitivity approach is combined with a highly tuned multiphysics simulation model. The model involves the interrelation between electrochemical reactions and electromagnetic phenomena so as to predict accurate current distributions in the electrowinning cell. In the sampling-based sensitivity approach, Kriging-based surrogate models are generated in a local window, and accordingly their sensitivity values are extracted. Such unique design strategy facilitates optimizing very complicated multiphysics and multi-dimensional design problems. Finally, ten design variables deciding the electrolytic cell structure are optimized, and then the uniformity of current distribution in the optimized cell is examined through the comparison with existing cell designs.

• Journal of Power System Engineering
• /
• v.22 no.1
• /
• pp.18-24
• /
• 2018

This paper focuses on systematic design about the membership ranges of the main design factors such as control error, control error rate, and sampling time for the fuzzy logic control of the variable speed drive refrigeration cycle. The upper and the lowest limit of the membership ranges are set up from the data of static characteristics obtained by experiments. Three kinds of membership ranges on the control error and the control error rate are tested by experiments. Especially, an effect of sampling time on control performance is also investigated in the same way. Experimental data showed the control error rate and the sampling time strongly effected on the control performance of the refrigeration cycle with a variable speed drive.

• Journal of Veterinary Clinics
• /
• v.28 no.4
• /
• pp.422-426
• /
• 2011

For a national survey in which wide geographic region or an entire country is targeted, multi-stage sampling approach is widely used to overcome the problem of simple random sampling, to consider both herd- and animallevel factors associated with disease occurrence, and to adjust clustering effect of disease in the population in the calculation of sample size. The aim of this study was to establish sample size for estimating bovine tuberculosis (TB) in Korea using stratified two-stage sampling design. The sample size was determined by taking into account the possible clustering of TB-infected animals on individual herds to increase the reliability of survey results. In this study, the country was stratified into nine provinces (administrative unit) and herd, the primary sampling unit, was considered as a cluster. For all analyses, design effect of 2, between-cluster prevalence of 50% to yield maximum sample size, and mean herd size of 65 were assumed due to lack of information available. Using a two-stage sampling scheme, the number of cattle sampled per herd was 65 cattle, regardless of confidence level, prevalence, and mean herd size examined. Number of clusters to be sampled at a 95% level of confidence was estimated to be 296, 74, 33, 19, 12, and 9 for desired precision of 0.01, 0.02, 0.03, 0.04, 0.05, and 0.06, respectively. Therefore, the total sample size with a 95% confidence level was 172,872, 43,218, 19,224, 10,818, 6,930, and 4,806 for desired precision ranging from 0.01 to 0.06. The sample size was increased with desired precision and design effect. In a situation where the number of cattle sampled per herd is fixed ranging from 5 to 40 with a 5-head interval, total sample size with a 95% confidence level was estimated to be 6,480, 10,080, 13,770, 17,280, 20.925, 24,570, 28,350, and 31,680, respectively. The percent increase in total sample size resulting from the use of intra-cluster correlation coefficient of 0.3 was 22.2, 32.1, 36.3, 39.6, 41.9, 42.9, 42,2, and 44.3%, respectively in comparison to the use of coefficient of 0.2.

• Journal of Practical Engineering Education
• /
• v.13 no.2
• /
• pp.393-403
• /
• 2021

The purpose of this study is to propose a method of designing a systematic panel survey at the institutional level to lay the foundation for data-based decision-making using vocational training teachers and instructors as the population. In this study, the target population and sampling frame, which are the main elements necessary for planning a panel survey, are proposed. Also based on expert advice and empirical data analysis, the sampling unit and sampling method taking into account the outer and inner variables are presented, comprehensively considering the representativeness of data, the efficiency and sustainability of data collection. As a result of the study, with the unit of the panel as a vocational training institution, a two-stage stratified proportional sampling plan is proposed so that the institution selected as the panel and the vocational training teachers and instructors belonging to the institution can participate in the survey. Based on this, implications for the panel survey sample design are presented.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.22 no.2
• /
• pp.63-75
• /
• 2018

This paper proposes extension of Latin Hypercube Sampling (LHS) to avoid the necessity of using intervals with the same probability area where intervals with different probability areas are used. This method is called Weighted Latin Hypercube Sampling (WLHS). This paper describes equations and detail procedure necessary to apply weight function to WLHS. WLHS is verified through numerical examples by comparing the estimated distribution parameters with those from other methods such as Random Sampling and Latin Hypercube Sampling. WLHS provides more flexible way on selecting samples than LHS. Accuracy of WLHS estimation on distribution parameters is depending on the selection of weight function. The proposed WLHS is applied to seismically isolated structures in nuclear power plants. In this application, clearance-to-stops (CSs) calculated using LHS proposed by Huang et al. [1] and WLHS proposed in this paper, respectively, are compared to investigate the effect of choosing different sampling techniques.

• The Korean Journal of Applied Statistics
• /
• v.20 no.3
• /
• pp.605-618
• /
• 2007

Adaptive sampling design is the selection procedure which depends on observed values of the variable of interest. It is the method which could be applied to the rare and unapproachable population. Adaptive cluster sampling strategies are more efficient than simple random sampling on equivalent sample size. Adaptive sampling with new estimators through the Rao-blackwell method have lower variance than Horvitz-Thompson (HT) and Hansen-Hurwitz (HH). Also, to determine suitable sample size, it was used expected sample and the method finding appropriate sample size by changing initial sample size were studied.

• ALGAE
• /
• v.24 no.2
• /
• pp.111-120
• /
• 2009

Choosing an appropriate sample unit is a fundamental decision in the design of ecological studies. While numer-ous methods have been developed to estimate organism abundance, they differ in cost, accuracy and precision.Using both field data and computer simulation modeling, we evaluated the costs and benefits associated with twomethods commonly used to sample benthic organisms in temperatc kelp forests. One of these methods, theTargeted Sampling method, relies on different sample units, each "targeted" for a specific species or group ofspecies while the other method relies on coefficients that represent ranges of bottom cover obtained from visual esti-mates within standardized sample units. Both the field data and the computer simulations suggest that both meth-ods yield remarkably similar estimates of organisnm abundance and among-site variability, although the Coefficientmethod slightly underestimates variability armong sample units when abundances are low. In contrast, the twomethods differ considerably in the effort needed to sample these communities; the Targeted Sampling requiresmore time and twice the persormel to complete. We conclude that the Coeffident Sampling metliod may be bettcrfor environmental monitoring programs where changes in mean abundance are of central conccm and resources arelimiting, but that the Targeted sampling methods may be better for ecological studies where quantitative reIation-ships among species and small-scale variability in abundance are of central concern.

• Water Engineering Research
• /
• v.3 no.1
• /
• pp.31-44
• /
• 2002

The effect of diurnal cycle, intermittent visit of observation satellite, sensor installation, partial coverage of remote sensing, heterogeneity of soil properties and precipitation to the soil moisture estimation error were analyzed to present the global sampling strategy of soil moisture. Three models, the theoretical soil moisture model, WGR model proposed Waymire of at. (1984) to generate rainfall, and Turning Band Method to generate two dimensional soil porosity, active soil depth and loss coefficient field were used to construct sufficient two-dimensional soil moisture data based on different scenarios. The sampling error is dominated by sampling interval and design scheme. The effect of heterogeneity of soil properties and rainfall to sampling error is smaller than that of temporal gap and spatial gap. Selecting a small sampling interval can dramatically reduce the sampling error generated by other factors such as heterogeneity of rainfall, soil properties, topography, and climatic conditions. If the annual mean of coverage portion is about 90%, the effect of partial coverage to sampling error can be disregarded. The water retention capacity of fields is very important in the sampling error. The smaller the water retention capacity of the field (small soil porosity and thin active soil depth), the greater the sampling error. These results indicate that the sampling error is very sensitive to water retention capacity. Block random installation gets more accurate data than random installation of soil moisture gages. The Walnut Gulch soil moisture data show that the diurnal variation of soil moisture causes sampling error between 1 and 4 % in daily estimation.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.468-471
• /
• 1997

In this paper, we investigate the time-sampling effects on the digital implementation of singular perturbation based STT autopilot with excellent performance and propose a compensation method for the time-sampling effects. In digitization of analog STT autopilot, it is found that the stability margin of the fast dynamics is mostly affected to lead to rapid decrease. Under the this analysis, a composite digital controller with additional compensator for fast dynamics is proposed to improve the time-sampling effect and a simulation verifies the result.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2005.05a
• /
• pp.922-926
• /
• 2005

Progressively censored variables sampling plans are proposed for the lot acceptance of parts whose life follows Weibull distribution with known shape parameter. Progressive type-II censoring gives us not only time to failure but also degradation information. So, one can construct more flexible and more cost effective sampling plans. Design parameters of our sampling plan are determined by using the usual two-point approach.