• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.8 no.1
• /
• pp.115-123
• /
• 1998

Vinyl chloride monomer exists as gas phase at normal temperature and reacts with oxygen and strong oxidant in the air to form oxidized materials. Because of being easily synthesized, it is used as a main source at the synthetic reaction process of PVC synthesis factories. Ministry of Labor regulates its usage as a carcinogen and its exposure level as 1 ppm. But the amount of VCM production in PVC and VCM production process hasn't been exactly estimated. In addition, facilities of this factory are located in outdoor. Therefore, this study was designed to investigate effects of temperature on breakthrough of charcoal tube at a fixed concentration and temperature during VCM sampling based on NIOSH and OSHA methods which were used as methods of occupational environment measuring and analysis. During the sampling of VCM, methods of OSHA and NIOSH require flow rate of 0.05 lpm and sampling volume of $3{\ell}$, $5{\ell}$ respectively, at this time carbon molecular sieve tube and coconut shell charcoal tube are used to observe the breakthrough along with concentration and temperature. As a result, significant difference between average adsorbed amounts of OSHA methods but that of NIOSH methods cannot be found. NIOSH method is likely to be effected by high temperature and normal temperature in high concentration. Breakthrough is not found in the method of OSHA at different conditions of temperature and concentration. As the result of this study we could verify that breakthrough occurred in the process of sampling VCM with NIOSH methods. Therefor in summer time, breakthrough should be considered and research on the breakthrough volume should be done. It is considered the research about the specificity of the coconut shell charcoal and carbon molecular sieve sorbent should be done when sampling VCM in comming days.

• Communications for Statistical Applications and Methods
• /
• v.13 no.3
• /
• pp.685-699
• /
• 2006

Commercial banks and other related areas have developed internal models to better quantify their financial risks. Since an appropriate credit risk model plays a very important role in the risk management at financial institutions, it needs more accurate model which forecasts the credit losses, and statistical inference on that model is required. In this paper, we propose a new method for estimating a default rate. It is a Bayesian approach using the power prior which allows for incorporating of historical data to estimate the default rate. Inference on current data could be more reliable if there exist similar data based on previous studies. Ibrahim and Chen (2000) utilize these data to characterize the power prior. It allows for incorporating of historical data to estimate the parameters in the models. We demonstrate our methodologies with a real data set regarding SOHO data and also perform a simulation study.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.18 no.4
• /
• pp.67-72
• /
• 2010

In this study, performance analysis and design optimization is carried out for a multi-rate spring brake system, which is used in a cable ride to stop the arriving passengers in safe and comfortable manner. Mathematical model for the spring is developed toward the objective of minimizing the impact at the arrival while satisfying the constraint of limited distance at the stop. Matlab code is utilized to examine parameters affecting the performance of the brake system. The results are validated by a commercial software RecurDyn. Kriging meta model is used to reduce the computational cost of the analysis. Optimization is conducted by RecurDyn, from which the design parameters are determined that minimizes the impact at the stop.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.2
• /
• pp.306-317
• /
• 1997

This ppaer presents a bit-rate conversion system for efficient communications between 3 channel CVSD systems with different bit-rates. The proposed conversion system is implemented in the digital domain and specially, the conversion problem between 32 Kbps and 16 Kbps CVSD systems is studied. The conventional conversion system implemented in the analog domain allows signals to be easily degraded by external noises. To overcome this problem, a digital CVSD bit-rate conversion system robust to external noises is developed. the new systemdecodes CVSD bit sequences and converts sampling rates of decoded signals, then encodes signals at target bit-rates. Since linear phase property does not matter in this application, instead of FIR filters a IIR filter is employed to reduce the system complexity. Therefore, a 3 channel digital CVSD bit-rate conversion system was successfully real-time implemented using a general purpose DSP. In addition, conversion problems with unkown time constants were experimented and good experimental results were obtained.

• 재활복지
• /
• v.20 no.3
• /
• pp.105-124
• /
• 2016

The This study aims to verify the causal relationship among physically disability persons participation in exercise, heart rate variance, and facial expression recognition. To achieve such research goal, this study targeted 139 physically disability persons and as for sampling, purposive sampling method was applied. After visiting a sporting stadium and club facilities that sporting events were held and explaining the purpose of the research in detail, only with those who agreed to participate in the research, their heart rate variance and facial emotion awareness were measured. With the results of measurement, mean value, standard deviation, correlation analysis, and structural equating model were analyzed, and the results are as follows. The quantity of exercise positively affected sympathetic activity and parasympathetic activity of autonomic nervous system. Exercise history of physically disability persons was found to have a positive influence on LF/HF, and it had a negative influence on parasympathetic activity. Sympathetic activity of physically disability persons turned out to have a positive effect on the recognition of the emotion, happiness, while the quantity of exercise had a negative influence on the recognition of the emotion, sadness. These findings were discussed and how those mechanisms that are relevant to the autonomic nervous system, facial expression recognition of physical disability persons.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.1
• /
• pp.97-103
• /
• 2014

In this paper, a clock-data recovery using a 1/8-rate phase detector is proposed. The use of a conventional full or half-rate phase detector requires relatively higher frequency of a recovered clock, which is a burden on the design of a sampling circuit and a VCO. In this paper, a 1/8-rate phase detector is used to lower the frequency of the recovered clock and a linear equalizer is used as a input circuit of a phase detector to reduce the jitter of the recovered clock. A test chip fabricated in a 0.13-${\mu}m$ CMOS process is measured at 1.5-GHz for a 3-Gb/s PRBS input and 1.2-V power supply.

• Journal of The Geomorphological Association of Korea
• /
• v.28 no.2
• /
• pp.15-30
• /
• 2021

This study tried to reveal distribution of incision rate and the factors from fluvial terrace deposits on the western and eastern slopes in the Middle Sobaek Mountain Range, using OSL age dating and topographical analysis. An average incision rate of 0.220 m/ka was estimated in the western slope streams, while the streams on the eastern slope showed a lower average incision rate of 0.121 m/ka. These results seem to indicate that the study area experienced an asymmetric uplift. Patterns of incision rate in the study area were different from those in the Northern Sobaek Mountain Range, probably suggesting that the Sobaek Mountain Range experienced spatially different uplift patterns. Among the factors, which were considered to influence on distribution of incision rate in the study area (e.g., altitude of sampling point, distance from divide, distance from axis, channel width, and bedrock type), distance from axis showed the strongest relationship with incision rate. Therefore, uplift is thought to be the most significant factor in distribution of incision rate in the Middle Sobaek Mountain Range.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.12 no.4
• /
• pp.388-396
• /
• 2012

In this paper, a $320{\times}240$ pixel, 80 frame/s CMOS image sensor with a low power dual correlated double sampling (CDS) scheme is presented. A novel 8-bit hold-and-go counter in each column is proposed to obtain 10-bit resolution. Furthermore, dual CDS and a configurable counter scheme are also discussed to realize efficient power reduction. With these techniques, the digital counter consumes at least 43% and at most 61% less power compared with the column-counters type, and the frame rate is approximately 40% faster than the double memory type due to a partial pipeline structure without additional memories. The prototype sensor was fabricated in a Samsung $0.13{\mu}m$ 1P4M CMOS process and used a 4T APS with a pixel pitch of $2.25{\mu}m$. The measured column fixed pattern noise (FPN) is 0.10 LSB.

• Smart Structures and Systems
• /
• v.16 no.6
• /
• pp.1147-1167
• /
• 2015

Wireless smart sensors, which have become popular for monitoring applications, are an attractive option for implementing structural control systems, due to their onboard sensing, processing, and communication capabilities. However, wireless smart sensors pose inherent challenges for control, including delays from communication, acquisition hardware, and processing time. Previous research in wireless control, which focused on semi-active systems, has found that sampling rate along with time delays can significantly impact control performance. However, because semi-active systems are guaranteed stable, these issues are typically neglected in the control design. This work achieves active control with smart sensors in an experimental setting. Because active systems are not inherently stable, all the elements of the control loop must be addressed, including data acquisition hardware, processing performance, and control design at slow sampling rates. The sensing hardware is shown to have a significant impact on the control design and performance. Ultimately, the smart sensor active control system achieves comparable performance to the traditional tethered system.

• 전기의세계
• /
• v.21 no.2
• /
• pp.9-19
• /
• 1972

The transient characteristics of separately excited d-c motor driven by thyristor d-c chopper is studied in this paper. The armature controlled system is applied. As a result of theoretrical analysis the following conculsions were drawn: (1) For the transient analysis, it is recognized that the state transition analysis is a more general method and powerful tool than the state equation method or signal flow graph method, although it includes iterative matrix calculations. And the system is dealt with a finite width sampled-data system in the state transition analysis. (2) The transient characteristics of the motor angular velocity and its torque to the sampling duration variation are compared with those due to the amplitude variation of d-c chopper voltage as follows. The attenuation rate of the transient characteristics is equal in both cases, but the initial value of the transient characteristics in former case is greater than in latter case. (3) The roots of characteristics equation of the system lie inside the unit circle of the Z-plane. Therefor the system is stable. Further it is found that as the sampling duration is decreased the relative stability is lessened.