• Research in Community and Public Health Nursing
• /
• v.17 no.2
• /
• pp.235-241
• /
• 2006

Purpose: This study was to review dysmenorrhea and its relief methods in nursing students by using base data for reducing dysmenorrhea. Method: The subjects were 92 students, data were collected by questionnaire surveys using convenience sampling and analyzed by the SPSS 12.0 program. Results: Medium amount of menstruation was most frequently answered and massage on painful sites was the most frequently used relief method(p<0.05). Frequency of medication was once a day during menstrual period, and methods that the most wanted to use when pain got severe was alternative methods(aroma, massage, and acupuncture)(p<0.05). Amount of menstruation showed a negative correlation with the duration(r=-0.32), dysmenorrhea was correlated with the severest days of dysmenorrhea(r=0.24) and the frequency of medication(r=-0.23). Conclusion: These results suggested that dysmenorrhea was correlated with the severest days of dysmenorrhea and the frequency of medication, but other variables showed no relations with menstrual characteristics.

• Proceedings of the KIPE Conference
• /
• 2002.07a
• /
• pp.343-346
• /
• 2002

In recent, complex SVPWM (Space Vector PWM) algorithm can be easily implemented by high performance microprocessor and DSP. Various SVPWM techniques are widely studied due to the advantages of low harmonic distortion and high use ratio of D.C. link voltage. Most of various studies for improving of VS-PWM inverter performance are concentrated about switching pattern and zero pulse pattern split algorithms. However, dc link voltage that is determined at rated load and speed conditions is not proper in the low speed and under rated load. In this paper, analysis of current ripple with digitally implemented SVPWM inverter is introduced according to link voltage. The optimal link voltage in the designed inverter system and load condition is provided in order to suppress output voltage error and current ripple. As remaining the effective voltage vector interval per sampling period sufficiently, additional voltage error and current ripple are suppressed. The proposed algorithm is verified through digital simulation and experimental results.

• Proceedings of the KIPE Conference
• /
• 2002.07a
• /
• pp.580-583
• /
• 2002

An improved MPPT converter with current compensation method for small-scaled PV-applications is presented in this paper. The proposed method implements maximum power point tracking (MPPT) by variable reference current which is continuously changed during one sampling period. Therefore, the power transferred to the load is increased above $9\%$ by the proposed MPPT converter with current compensation method. As a result, the utilization efficiency of Photovoltaic (PV)-panel can be increased. In addition, as it doesn't use digital signal processor (DSP), this MPPT method has the merits of both a cost efficiency and a simple control circuit design. Therefore, it is considered that the proposed MPPT method is proper to low power, low cost PV-applications. The concept and control principles of the proposed MPPT method are explained in detail and its validity of the proposed method is verified through several simulated results.

• Proceedings of the KIPE Conference
• /
• 2003.07b
• /
• pp.667-670
• /
• 2003

In a switched reluctance motor drive, it is important to synchronize the stator phase excitation with the rotor position, because the position of rotor is an essential information. In the high-speed region, switching angles are fluctuated back and forth out of\ the preset value, which is caused by the sampling period of the microprocessor. In this paper, a low cost analog encoder suitable for practical applications is proposed. The validity of the proposed analog encoder with a proper logic controller is verified from the experiments.

• Journal of Power Electronics
• /
• v.16 no.5
• /
• pp.1791-1801
• /
• 2016

This paper considers a carrier based signal injection method for use in the three shunt sensing inverter (TSSI) for sensorless motor control. It also analyzes the loss according to the injection axis of the voltage signal. To remove both the phase current and rotor position sensors, a sensorless method and a phase current reconstruction method can be simultaneously considered. However, an interaction between the two methods can be incurred when both methods inject voltage signals simultaneously. In this paper, a signal injection based sensorless method with the 120° OFF Discontinuous PWM (DPWM) is implemented in a TSSI to avoid this interaction problem. Since one leg does not have a switching event for one sampling period in the 120° OFF DPWM, the switching loss is altered according to the injection axis. The switching loss in the d-axis injection case can be up to 32% larger than that in the q-axis injection case. Other losses according to the injection axis are also analyzed.

• Proceedings of the KIPE Conference
• /
• 2010.07a
• /
• pp.448-449
• /
• 2010

This paper proposes a sensorless control strategy for the Interior Permanent Magnet Synchronous Motor (IPMSM) by using the parallel reduced-order Extended Kalman Filter. The sensorless control strategy is composed with two EKFs alternately computed every sampling period with a new model. The new model is based on the extended electromotive force (EEMF) which has a simple structure, making position estimation possible without approximation. The proposed strategy can save computation time and estimate rotor speed and position. To verify the merit of the proposed strategy, simulation and experimental results validate the theoretical analysis and show the feasibility of the proposed control strategy.

• KSBB Journal
• /
• v.6 no.1
• /
• pp.15-25
• /
• 1991

The optimal glucose concentration for the high-density culture of recombinant yeasts was obtained using dynamic simulation. An adaptive and predictive algoritilm complimented by the rule base was proposed for the control of the fed-batch fermentation process. The measurement of process variables has relatively long sampling period and relatively long time delay characteristics. As one of the solution on these problems, prediction techniques and rule bases were added to a classical recursive identification and control algorithm. Rule bases were used in the determination of control input considering the difference between the predicted value and the measured value. A mathelnatical model was used in the estimation and interpretation of the changes of state variables and parameters. Better performances were obtained by employing the control algorithm proposed in the present study compared to the conventional adaptive control method.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.55 no.7
• /
• pp.337-345
• /
• 2006

This paper proposes a high speed SRM drive system for blower application with a new 4-level inverter and precise excitation position generator. For a high speed blower, a proper inverter and control method are proposed and the output characteristics are analyzed. In order to get a fast build-up and demagnetization of excitation current, a 4-level inverter system is proposed. The proposed 4-level inverter has additional charge capacitor, power switch and diode in the conventional asymmetric converter. The charged high voltage is supplied to the phase winding for fast current build-up, and demagnetization current is charged to additional capacitor of the 4-level inverter. In addition, a precise excitation position generator can reduce turn-on and turn-off angle error according to sampling period of digital control system. The proposed high speed SRM drive system is verified by computer simulation and experimental results.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.7 no.3
• /
• pp.12-20
• /
• 1997

In this paper, the authors propose a method of stepwise tuning a controller with unknown process properties through! its step response. A fuzzy controller is chosen to achieve this aim. The main object of this paper is to give knowledge for the improvement of the response, under the limited prop erties obtained from the step response of the process. We obtained the adequate tuning method through simulations of many control objects. And the method of selecting optimal sampling period is also shown.

• Journal of environmental and Sanitary engineering
• /
• v.16 no.1
• /
• pp.9-17
• /
• 2001

During the period from Jan. to Dec. 1998 and Yellow Sand phenomena, dustfall samples were collected by simple deposit jar and petridish, and calculation of passage amounts of Yellow Sand by the utilization of environmental air monitoring 4 stations from 1995 to 1998 in Seoul. Passage amounts of Yellow Sand were estimated 3,024 ton in 1995, 367 ton in 1996, 105 ton in 1997 and 3,444 ton in 1998 respectively. The highest passage amount of Yellow Sand was marked 3,444 ton in 1998 that is related to frequence of appearance. Average deposition of dusfall was $6.570{\;}ton/\textrm{km}^2$/month during the sampling periods, while average deposition of dusfall in Yellow Sand phenomena was $53.68{\;}ton/\textrm{km}^2$/month which was 8 times higher than average deposition.