A Design of High Speed SRM Drive System

SRM의 고속구동을 위한 제어시스템 설계

  • 이주현 (경성대 공대 전기전자공학) ;
  • 이동희 (경성대 공대 전기메카공학부) ;
  • 안진우 (경성대 전기메카공학부)
  • Published : 2006.07.01

Abstract

This paper proposes a high speed SRM drive system for blower application with a new 4-level inverter and precise excitation position generator. For a high speed blower, a proper inverter and control method are proposed and the output characteristics are analyzed. In order to get a fast build-up and demagnetization of excitation current, a 4-level inverter system is proposed. The proposed 4-level inverter has additional charge capacitor, power switch and diode in the conventional asymmetric converter. The charged high voltage is supplied to the phase winding for fast current build-up, and demagnetization current is charged to additional capacitor of the 4-level inverter. In addition, a precise excitation position generator can reduce turn-on and turn-off angle error according to sampling period of digital control system. The proposed high speed SRM drive system is verified by computer simulation and experimental results.

Keywords

References

  1. Mekhiche M, Kirtley J.L, Tolikas M, Ognibene E, Kiley J, Holmansky E, Nimblett F; 'High Speed Motor Drive Development for Industrial Applications', International Conference IEMD '99, 9-12, IEEE CNF, pp.244-248, 1999 https://doi.org/10.1109/IEMDC.1999.769082
  2. M. A. Rahman, A. Chiba, T. Fukao: 'Super High Speed Electrical Machines-Summary' Power Engineering Society General Meeting IEEE 6-10 https://doi.org/10.1109/PES.2004.1373062
  3. T. J. E Miler; 'Switched Reluctance Motor and Their Control,' Oxford University Pree, pp.22, 70, 161-180, 1993
  4. M. Dahmane, F.Meibody-Tabar, F-M. Sargos: 'An Adpted Converter For Switched Reluctance Motor/ Generator for High SPeed Aplications', IEEE. 2000 https://doi.org/10.1109/IAS.2000.882088
  5. Changhwan Choi, Daeok Lee, Kyihwan Park, 'Fuzzy design of a switched reluctance motor based on the torque profile optimization', Magnetics, IEEE Transactions on, Volume 36, Issue 5, Part 1, pp.3548- 3550, Sept 2000 https://doi.org/10.1109/20.908894