• 한국초전도ㆍ저온공학회논문지
• /
• 제19권2호
• /
• pp.53-57
• /
• 2017

In superconducting power devices including power cables in which high temperature superconducting (HTS) tapes are utilized, a reliable electrical insulation should be achieved for its maximum performance. For an efficient design of HTS superconducting devices, a comparative evaluation of the mechanical and thermal propperties for various insulation materials at cryogenic temperatures is required. Especially, in the process of the property evaluation of the sheet-shaped insulation materials, anisotropy according to the machining direction should be considered because the mechanical and thermal properties are significantly influenced by the sample orientation. In this study, the cryogenic thermal and mechanical properties of various insulation material sheets such as PPLP, Cryoflex, Teflon, and Kapton were determined considering sample orientation. All samples tested at cryogenic temperature showed significantly higher tensile strength as compared with that of room temperature. The ultimate tensile strength at both temperature conditions significantly depended upon the sample orientation. The thermal properties of the insulation materials exhibited a slight difference among samples depending on the orientation: for the PPLP and Cryoflex, the CD orientation showed larger thermal contraction up to 77 K as compared to the MD one. MD samples in PPLP and Cryoflex showed a lower CTE and thermal contraction which made it more promising as an insulation material due to its comparable CTE with HTS CC tapes.

• Bulletin of the Korean Chemical Society
• /
• 제23권6호
• /
• pp.865-872
• /
• 2002

A systematic way of determining the equilibrium orientation of carbon monoxide (CO) in heme proteins using time-resolved polarized mid-IR spectroscopy is presented. The polarization anisotropy at pump-probe delay time of zero in the limit of zero photolysis and the angular distrbution function of CO are required to obtain the equilibrium orientation of CO. An approach is developed for determining the polarization anisotropy in the zero-photolysis limit from the anisotropy measured under finite photolysis conditions in an optically thick sample where the fraction of molecules photolyzed decreased as the pump pulse passes through and is absorbed by the sample. This approach is verified by measuring the polarization anisotropy of CO of carbonmonoxy myoglobin at various levels of photolysis. This method can be readily applied to other photoselection experiments determining precise angle between transition dipoles.

• 동아시아경상학회지
• /
• 제7권1호
• /
• pp.39-49
• /
• 2019

Purpose - The major aim of this article is to advance understanding of the relationship between market orientation and speed-to-market. Specifically, this study examines the different impacts of component of market orientation on commitment to R&D and speed-to-market and explores whether market uncertainty plays a role of moderating in speed-to-market for market-oriented firms. Research design, data, and methodology - This study collected a survey data from Korean exporting firms. The Final sample size was 196. The measure of market orientation was conceptualized with second order constructs. All items were measured on five-point scale. To confirm hypotheses, this study conducted a hierarchical regression. Results - As sub-constructs of market orientation, customer orientation, competitor orientation and interfunctional coordination foster speed-to-market, and the relationship between only customer orientation and speed-to-market might be weakened when the extent of market uncertainty is high. Conclusions - This study confirmed the relationship between market orientation and speed-to-market, with three components of market orientation respectively, and whether market uncertainty plays a role of moderating which weaken the link between market orientation and speed-to-market. It could be useful to take a component approach to the market orientation construct, because the roles of different market orientation components might vary, contingent on uncertainty in the environment.

• 벤처창업연구
• /
• 제15권1호
• /
• pp.125-141
• /
• 2020

본 연구는 창업자의 전략적 지향성과 사회적 자본이 창업기업의 성과에 미치는 영향을 분석하였다. 전략적 지향성은 기업가적 지향성, 시장 지향성, 기술 지향성으로 구분하고 사회적 자본은 외부 네트워크의 지원과 창업팀에 대한 신뢰 및 응집력으로 정의하여 그 효과를 실증하였다. 또 사회적 자본이 전략적 지향성의 효과를 조절하는 조절효과가 있는지도 살펴보았다. 설립 5년 미만의 79개 스타트업을 대상으로한 실증분석에서, 기술 지향성만이 창업성과에 유의한 영향을 미치는 것으로 나타났다. 사회적 자본은 모두 창업성과에 유의한 효과를 미치는 것으로 나타났으며 그 조절효과는 부분적으로 검증되었다. 본 연구결과는 증거 중심의 스타트업 지원책을 수립하는데 공헌할 것으로 기대된다.

• 한국의류학회지
• /
• 제28권9_10호
• /
• pp.1253-1264
• /
• 2004

The purpose of this study is to develop clothing shopping orientation[CSO] scale reflecting the conceptual structure of CSO. For this purpose, a questionnaire composed of comprehensive 85 CSO items was developed through 2-step preliminary tests. Data was collected from two samples. One sample(n=559) was for scale development and the other sample(n=235) was for cross validity test. Descriptive analysis, correlation analysis, exploratory factor analysis, regression analysis, ANOVA, and confirmatory factor analysis were used for data analysis. For each lower-dimension within the CSO conceptual structure model, 1-2 items were selected based on the quantitative and the qualitative standards. As a result, a CSO scale composed of 31 items was developed, and reliability, construct validity, cross validity, convergent validity, discriminant validity, and criterion validity of the scale were verified. This study has significance in offering the standardized scale to both the academic and the practical fields.

• 대한전기학회논문지
• /
• 제33권4호
• /
• pp.157-163
• /
• 1984

The object of this paper is to investigte the gate controlled diode structure for ionic concentration measurement. It includes device fabrication, characterization, device physics and modeling of the gate controlled diode structure. The differences of turn on voltages and surface generation currents in the (100) and (111) silicon crystallographic orientation of the sample device were observed. Therefore the dependence of these two factors of the silicon crystallographic orientation was investigated. It was observed that drifts arose after extended immersion of the sample device in acid or base solutions. The surface generation-recombination velocity of both (100) and (111) increased. The increase in the interfacial traps for both surface, determined by the turn on voltage was directly proportional to the surface generation-recombination velocity increase.

• 간호행정학회지
• /
• 제16권3호
• /
• pp.267-275
• /
• 2010

Purpose: This study conducted to identify the effect of learning organization construction and learning orientation on organizational effectiveness among hospital nurses. Method: Data was collected from convenient sample of 296 nurses who worked for the major hospitals in Seoul, Gyeonggi-do and Gangwoen-do. The self-reported questionnaire was used to assess the general characteristics, the level of the learning organization construction, learning orientation and organizational effectiveness. The data were analyzed using descriptive statistics, pearson's correlation coefficient and multiple regression. Result: The mean score of learning organization construction was 3.61(${\pm}.32$), learning orientation got 3.26(${\pm}.39$), and organizational effectiveness obtained 3.38(${\pm}.42$). The learning organization construction affects of organizational effectiveness by 44.18% and learning orientation by 37.43%. Conclusion: This finding indicates that learning organization construction and learning orientation affects the nurses' organizational effectiveness in hospital.

• 대한가정학회지
• /
• 제30권4호
• /
• pp.203-217
• /
• 1992

From the findings of an exploratory study describing the living environments of segregated Alzheimer/Dementia Units (ADUs), the results relative to environmental cueing reatures, reality orientation aids, and communication/noise control methods are highlighted. Data were collected from a nonrandom, purposive sample of 99 ADUs and their parent long term care facilities in 34 states. Specific recommendations are made about physical features that may assist confused and disoriented residents and contribute to way-finding and orientation in specialized dementia units.

• 무역학회지
• /
• 제45권5호
• /
• pp.161-179
• /
• 2020

The importance of entering the international market for small and medium-sized enterprises (SMEs) has been continuously emphasized. As a way to overcome these factors, prior studies have increased interest in dynamic capability. The purpose of this study is to investigate the effects of entrepreneurial orientation, learning orientation, and dynamic capability on their international performance of SMEs. Drawing on an extensive review of the literature on dynamic capability view and internationalization, hypotheses are developed and tested using a sample of 214 SMEs in South Korea. Structural equation modeling was applied. As a result of analysis, first, dynamic capability has a significant effect on international performance. Second, entrepreneurial orientation has significant influence on dynamic capability. Third, learning orientation has significant influence on dynamic capability. Lastly, slack resource was found to moderate the relationship between dynamic capability and international performance. The results indicate that their entrepreneurial orientation and learning orientation ware driver of their dynamic capability. and that their dynamic capability was significant driver of their international performance. In the final conclusion, implications and limitations of research and suggestions for future research are discussed.

• 한국초전도ㆍ저온공학회논문지
• /
• 제24권3호
• /
• pp.52-56
• /
• 2022

Single-grain (c-normal or c-parallel) and multi-grain YBCO superconductors were prepared by a melt growth process with/without seeding. The magnetic levitation force and trapped magnetic field at liquid N₂ temperature (77 K) of the YBCO superconductors were investigated. Samples for the levitation force measurement were zero-field cooled (ZFC) to 77 K, and samples for trapped field measurement were field-cooled (FC) using Nd magnets. As for the magnetic levitation force, the c-normal, single grain sample showed the largest value, whereas the multi-grain sample showed the lowest value. The trapped magnetic field of the c-normal and c-parallel single-grain samples was 4-5 times that of the multi-grain sample. In addition, as the external magnetic field (the number of magnets) increased, the both properties increased proportionally. These results were explained in terms of the orientation dependence of the levitation forces and the magnetic field trapping capability of the YBCO superconductor.