• 한국정밀공학회지
• /
• 제34권1호
• /
• pp.59-63
• /
• 2017

We present a multi-sample array device based on a pneumatic system. Solenoid valves were used to control a micro valve in a pneumatic system. The use of a compressor together with a vacuum pump ensured that one outlet could supply both compression and vacuum pressure. The multi-sample array device was fabricated using conventional photolithography and PDMS casting. The device was composed of a multiplexer, sample array, and rinsing. The multiplexer could control four sample solutions injecting into the sample array chamber. Sample solution not arrayed was removed by DI-water from the rinsing inlet. To prevent trapping of microbubbles in the channel during injection of sample solution into the device, surfactant was added in PDMS solution to serve as a hydrophilic surface treatment. As a result, the device could be used as a sample array for 64 cases, using four samples and three columns of three chambers.

• 한국군사과학기술학회지
• /
• 제16권3호
• /
• pp.382-389
• /
• 2013

In anti-jamming GPS receiver, adaptive signal processing techniques in which the radiation pattern of adaptive array antenna of elements may be adaptively changed used to reject interference, clutter, and jamming signals. In this paper, I describes adaptive signal processing technique using the sample matrix inversion(SMI) algorithm. This adaptive signal processing technique can be applied effectively to wideband/narrowband anti-jamming GPS receiver because it does not consider the satellite signal directions and GPS signal power level exists below the thermal noise. I also analyzed the effects of covariance matrix sample size and diagonal loading technique on the system performance of five-element circular array antenna. To attain near optimum performance, more samples required for calculation covariance matrix. Diagonal loading technique reduces the system nulling capability against low-power jamming signals, but this technique improves robustness of adaptive array antenna.

• 분석과학
• /
• 제11권2호
• /
• pp.96-104
• /
• 1998

수 많은 광검출기들이 직선으로 집적된 광다이오드 어레이를 이용한 모세관 전기영동장치용 다채널 검출기를 개발하였다. 본 연구에서 사용된 광다이오드 어레이는 1024개의 광검출소자를 가지고 있으며 275~675 nm 파장범위에서 시료의 흡수분광스펙트럼을 검출할 수 있다. 이 장치는 30 ms내에 전 파장영역의 스펙트럼을 얻을 수 있으며, PC에 의하여 시료분석에 필요한 여러 가지 조건들을 제어할 수 있도록 설계하였다. 개발된 검출기의 성능을 L-ascorbic acid와 alizarin yellow GG를 사용하여 시험하였다. 본 연구에서 개발한 모세관 전기영동장치용 다채널 검출기의 재현성 실험결과 상대 표준편차는 5.6%이었다.

• 한국음향학회:학술대회논문집
• /
• 한국음향학회 1992년도 학술논문발표회 논문집 제11권 1호
• /
• pp.29-32
• /
• 1992

In this paper, a systolic array structure is derived from the realization of 2-D IIR digital filters directed from the SFG(signal flow graph). After realized the 1-D formed partial systolic array, we implemented the complete systolic array to be cascaded 1-D form. The cascading of partial systolic arrays reduce the storage element which sued to delay input signal. 1-D systolic array is derived from that DG is designed through local communication approach and then it mapping to SFG. The derived structure is very simple and has high throughput because during new imput sample is supplied, new output is obtained every sampling period. And broadcast input signal is eliminated. Since the systolic array has property of regularity, modularity, local interconnection and highly synchronized multiprocessing, thus is very suitable for VLSI implementation.

• 한국생산제조학회지
• /
• 제18권6호
• /
• pp.604-613
• /
• 2009

Recently, researches to develop phased array ultrasonic examination techniques are proceeded to diagnose dental caries and the status of surgical operation of dental implant. Sound field analysis of phased array ultrasonic transducers were carried out in order to characterizing the ultrasonic phased array beams. The sound field of ultrasonic radiation was calculated for the sample called "gypsum-improved stone" with the similar characteristics of dental materials. Industrial phased array ultrasonic devices were utilized for the insptriion of the artificial flaws machined in the gypsum-improved stone. Dental implants were made at the pig jaw bone and defect images were confirmed for the dental implants.

• 한국통신학회논문지
• /
• 제19권2호
• /
• pp.345-353
• /
• 1994

본 논문에서는 Sample Array Covariance Matrix의 대각선요소들의 평균치를 취하여 이를 대각선 요소값들로 대치하여 도래방향각 예측을 수행하는 소위 'Averaged MUSIC' 방법이 낮은 신호대잡음비, 신호원들이 근접해 있는 경우, Sensor의 수가 제한되어 있는 경우등에서 MUSIC에 비하여 훨씬 고해상도의 DOA 예측을 수행함을 보였다. 이를 위해서 통계적인 방법을 사용하여서 한 두가지 경우에 나오는 특별한 결과를 배제하고 가능한한 정확한 결과 비교를 위해 노력하였다.

• 한국근적외분광분석학회:학술대회논문집
• /
• 한국근적외분광분석학회 2001년도 NIR-2001
• /
• pp.1619-1619
• /
• 2001

Ourwork aims to assess the content of dry matter, protein, cell wall parameters and water soluble carbohydrates in forages without having to handle samples, transport them to a laboratory, dry, grind and chemically analyze them. for this purpose, the concept of fresh forage analysis under field conditions by means of compact integrated NIRS InGaAs-diode array instruments on small plot harvesters is being evaluated for plant breeding trials. This work was performed with the world first commercial experimental forage plot harvester equipped with a NIRS module for the collection, compression, and scanning of forage samples (including automatic referencing and dark current measure ments). It was used for harvesting and analyzing a number of typical forage grass and forage legume plot trials. After NIRS measurements in the field each sample was again analyzed in the laboratory by means of a conventional grating spectrometer equipped with Si-and PbS-detectors. Conventional laboratory analysis of the samples was restricted to dry matter (DM) content by means of oven drying at 105. Routine chemometric procedures were then employed to assess the comparative accuracy and precision of the DM assessments in the spectral range between 950 and 1650nm by the NIRS diode array as well as by the conventional NIRS scanning instrument. The results of this study confirmed that the type of NIRS diode array instrument employed here functioned well even in rugged field operations. further refinements proved to be necessary for optimizing the automatic filling of the sample compartment to adjust for the wide variation in forage material under conditions of extremely low or high harvest yields. The error achieved in calibrating the apparatus for forages of typical DM content proved to be satisfactory (SECV < 1.0). Possibly as a consequence of higher sampling errors, its performance in atypical forages with elevated DM contents was less satisfactory. The error level obtained on the conventional grating NIR spectrometer was similar to that of the diode array instrument for both types of forage.

• 한국전자파학회논문지
• /
• 제26권9호
• /
• pp.828-836
• /
• 2015

본 논문은 위상배열 레이더를 사용하여 실제표적을 추적하였을 때 추적 정확도를 평가하기 위한 알고리듬 연구이다. 실표적에 대한 추적 정확도를 평가하기 위해서는 실표적 위치에 대한 정보가 있어야 하지만, 시험비용 및 시험시간의 증대로 인해 위상배열 레이더에서 획득된 데이터만을 사용하여 실표적의 정확도를 평가하는 알고리듬을 제시한다. 이러한 평가 알고리듬은 위상배열 레이더에서 사용된 ${\alpha}-{\beta}$ 추적필터의 잔차로부터 추적 정확도의 지표인 거리오차와 각도 오차의 표준편차를 도출한 결과이며, 통계적 방법으로 sample variance 개념을 사용하게 된다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2004년도 전력전자학술대회 논문집(1)
• /
• pp.105-108
• /
• 2004

In this paper, the simple analog MPPT (Maximum Power Point Tracking) algorithm is proposed for the solar array of KOMPSAT (Korea Multi-Purpose Satellite). This method doesn't need any calculation of power by multiplication of voltage and current and a measurement of the solar array temperature. It is consist of only two sample and hold circuits, two comparators, a flip-flop, and an integrator. The proposed MPPT algorithm is verified by the simulation for the 100[W] solar array.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.774-779
• /
• 2003

Arc-shaped line array slits have been used for the laser generation of focused Lamb waves. The spatially expanded Nd:YAG pulse laser was illuminated through the arc-shaped line array slit on the surface of a sample plate to generate the Lamb waves of the same pattern as the slit. Then the generated Lamb waves were focused at the point of which distance from the slit position is dependent on the curvature of slit arc. The proposed method showed better spatial resolution than the conventional linear array slit in the detection of laser machined linear defect and drill machined circular defect on aluminum plates of 1mm thickness.