• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제50권7호
• /
• pp.340-345
• /
• 2001

Because they have superior insulating properties and lower in price than their ceramic equivalents, polymeric insulators have been used in outdoor insulators. But polymeric insulators mainly using in an heavy contamination area of outdoor could be easily attached to contaminants such as salt and by-products of industrial processes. To understand its effect on contaminants adhered to these insulators, we dismounted polymeric insulators adhered contaminant in the field, and evaluated its electrical characteristics, CA, and ESDD. We also manufactured slurry mixed by some kaolin and salt for the artificial contamination test and measured the degree of contaminant, AC leakage current for these contaminated samples. Consequently, the adhered contaminants to its surface is likely to be affected the performance of insulation.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 C
• /
• pp.1832-1834
• /
• 2004

The degree of contamination on outdoor insulator is one of the most importance factors to determine the pollution level of outdoor insulations, and the sea salt is known as the most dangerous pollutant. As shown through the preceding study, the generation of salt pollutant and the pollution degree of outdoor insulator have a close relation with meteorological conditions, such as wind velocity, rainfall, and so on. So, in this paper, we have made database using the past meteorological data and ESDD(equivalent salt deposit density) and then we predicted the pollution degree in the future after analyzing currently meteorological data of database.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2001년도 학술대회논문집
• /
• pp.203-206
• /
• 2001

Since th three sides of korea peninsula are surrounded by the sea, electric apparatus are greatly contaminated by the salt generated by the typhoon, seasonal wind, sea wind and sea fog. This contamination causes electric power apparatus to fail. Thus in this paper, we investigated to influence upon electrical properties of outdoor insulators with non-uniformity contamination in the experimental condition because The contamination of outdoor insulator highly depended wind property In the service condition, insulator was not uniformly contaminated. From the flashover test for the 254 mm suspension insulator, we could determine the influence non-uniform contamination on the electrical property of insulators. Through the experiment, we convinced to occur flashover from non-uniform contamination region of outdoor insulator. Contaminated area and pattern has a close relationship with the electrical properties of outdoor insulator.

• 전기학회논문지
• /
• 제61권9호
• /
• pp.1306-1313
• /
• 2012

This paper reports the contamination performance of two distribution arresters (new and used ones) tested under three different contaminant conditions - clean fog, ESDD (equivalent salt deposit density) level (A, B, C, and D), and kaolin contamination conditions, and their leakage current, total leakage current, and component of the resistive leakage current were measured in order to diagnose arrester deterioration. The 3rd harmonics was larger than 5th and 7th ones for the arrester under the clean fog, and as the ESDD contamination level was applied, 5th one became relatively larger than 3rd one. Therefore, these results indicated that the resistive leakage current could be used for the diagnosis of the arresters.

• Current Research on Agriculture and Life Sciences
• /
• 제32권1호
• /
• pp.30-33
• /
• 2014

김치의 숙성과정 중 일어날 수 있는 식품위생상 이물질의 오염방지를 위하여 혼입시험을 고안하여 이를 모니터링 하였다. 먼저, 시험군은 소금으로 절이고 양념으로 버무린 김치였고, 대조구는 소금에 절이지 않았거나 양념을 하지 않은 배추를 선택하였다. 오염원으로는 배추와 색깔이 유사한 청개구리를 선택하였다. 그 결과, 염분이 첨가되지 않은 대조구에서는 오염원이 10일 이상 생존하였으나 염분이 첨가된 시험구의 이물질은 5일 이상 생존할 수 없었다. 김치제조 중에 혼입된 생물학적 이물질은 대개 5일 정도 생존하므로 소비자에 의하여 살아있는 상태로 발견된 사실은 제조 후에 혼입되었다고 추정할 수 있다.

• 한국가금학회지
• /
• 제51권1호
• /
• pp.1-9
• /
• 2024

닭고기 패티에 소금함량을 줄이며 칼슘을 강화하기 위해 패각칼슘분말(SCP)을 첨가하며, 물성을 개선하기 위해 트랜스글루타미나아제(TG)를 첨가했을 때 나타나는 영향을 확인하기 위해 첨가하는 소금과 SCP, TG의 함량을 달리한 5개의 처리구(CON, 소금 2%; T1, 소금 0.75% + SCP 0.2%; T2, 소금 0.75% + SCP 0.2% + TG 0.2%; T3, 소금 0.5% + SCP 0.4%; T4, 소금 0.5% + SCP 0.4% + TG 0.2%)를 제조하여 패티의 육질특성 및 저장성을 비교 분석하였다. 닭고기 패티에 소금 첨가량을 낮췄을 때 회분 함량이 감소했으며 가열감량이 증가했다. 그리고 SCP와 TG를 첨가할수록 pH가 상승하였다. 소금, SCP, TG의 첨가량에 따른 육색의 변화는 없었으며, TG 없이 소금 0.5%와 SCP 0.4%를 첨가했을 때 경도와 씹음성이 감소했다. 소금을 0.5%로 줄이며 SCP 0.4%를 첨가했을 때 관능적으로 다즙성이 떨어진다는 평가를 받았지만 전체기호도를 포함한 나머지 관능평가항목에서는 차이를 보이지 않았다. 소금의 첨가량은 닭고기패티의 TBARS 결과에 영향을 주지 않았지만, 소금을 적게 첨가할 시 미생물 오염에 취약해질 수 있다는 결과를 보였다. 이를 통해 닭고기 패티에 소금을 줄이면서 SCP를 첨가하는 것은 관능적으로 큰 영향을 주지 않지만, 소금을 0.5% 이하로 첨가 시 패티의 물성에 부정적인 영향을 줌으로 TG의 첨가를 고려해야 한다. 또한 소금 첨가량이 감소할 시 미생물로 인한 저장성에 취약해지므로 제조 시 이에 대한 추가 첨가물을 고려해야 할 것으로 판단된다.

• 전기학회논문지
• /
• 제61권10호
• /
• pp.1461-1470
• /
• 2012

This paper reports the contamination performance of transmission line porcelain insulators tested under five different contaminant conditions - clean and ESDD (equivalent salt deposit density) level (A, B, C, and D) through measurement of their leakage current under drop of potential method. To estimate the contamination for transmission line porcelain insulators, leakage current waveform and its maximum value were measured under step-up power test. In the clean insulators test, % distortion factors decreased with increasing step-up power, and as the ESDD level increased, some characteristics such as frequency analysis, harmonics and % distortion facotor could be used for contamination diagnosis of the transmission line porcelain insulators.

• Corrosion Science and Technology
• /
• 제13권5호
• /
• pp.163-169
• /
• 2014

The corrosion resistance of epoxy-coated carbon steel was evaluated. The carbon steel surface was subjected to different treatment methods such as steel grit blasting and power tool treatment as well as contamination of water soluble salt. To study the effect of the surface treatments and contamination, the topology of the treated surface was observed by confocal microscopy and a pull-off adhesion test was conducted. The corrosion resistance of the epoxy-coated carbon steel was further examined by electrochemical impedance spectroscopy (EIS) combined with immersion test of 3.5 wt% of NaCl solution. Consequently, the surface contamination by sodium chloride with $16mg/m^2$, $48mg/m^2$ and $96mg/m^2$ didn't affect the adhesion strength for current epoxy coated carbon steel and blister and rust were not observed on the surface of epoxy coating contaminated by various concentration of sodium chloride after 20 weeks of immersion in 3.5 wt% NaCl aqueous solutions. In addition, the results of EIS test showed that the epoxy-coated carbon steel treated with steel grit blasting and power tool showed similar corrosion protection performance and surface cleanness such as Sa 3 and Sa 2.5 didn't affect the corrosion protectiveness of epoxy coated carbon steel.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 추계학술대회 논문집
• /
• pp.595-597
• /
• 2000

Poymeric insulators using in an heavy contamination area are easily attached to contaminants such as salt and by-products of industrial processes. To understand its effect on contaminants adhered to these insulators, we manufactured slurry mixed by some kaolin and salt as artificial contaminated solution. And then put samples in its slurry, for about one minute. And these samples are dried in natural condition for 6 days. We measured the degree of contaminant, AC leakage current for these contaminated samples.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 하계학술대회 논문집 Vol.5 No.2
• /
• pp.1166-1170
• /
• 2004

The leakage currents of transmission insulator were investigated as a function of environmental conditions, such as temperature, humidity, and rainfall. The insulators were artificially contaminated with insoluble yellow soil and kaolin which helped salt to stick on the surface of insulator. The insulators contaminated with the grade of B, C, and D were installed in the KoChang Testing Center. The leakage currents were measured and compared with non-contaminated insulators. The results indicated that the most important factor affecting leakage current was humidity. After heavy rain, the artificially contaminated salt was dissolved, resulting in similar characteristics between with and without contamination