• 한국연소학회:학술대회논문집
• /
• 2014.11a
• /
• pp.331-332
• /
• 2014

Underground power plant is required the strict safety management and safety assessment. Because it is the high risk of explosion by characteristic of enclosed space. In case gas leak of enclosed space, the ventilation facilities is very important in order to prevent explosion by the maintain less than the LEL(lower explosive limit). Thus, Through a safety assessment of ventilation volume is to reduce the risk for ventilation facilities in Underground power plant.

• 한국연소학회:학술대회논문집
• /
• 2014.11a
• /
• pp.317-317
• /
• 2014

The structure performance of a sealed power facilities and the explosion simulation contains significant amounts of scatter, and variability has been characterized in material properties of the structure, a sealed space density, combustible gas volume, gas concentrativeness, ignition site, and gas volume. In order to deal with such uncertainties, structural reliability analysis calculates the failure probability and the reliability index relevant to selected limit states providing quantitative measures of these uncertainties. In this study, structure safety assessment method on the explosion of a sealed power facilities was proposed by using the response surface method (RSM).

• Journal of the Korean Society of Safety
• /
• v.17 no.4
• /
• pp.66-70
• /
• 2002

The transient soot distributions within the region bounded by the droplet surface and the flame were measured using a full-filed light extinction technique and subsequent tomographic inversion using Abel transforms. The soot volume fraction results for n-heptane droplets represent the first quantitative assessment of the degree of sooting for isolated droplets burning under microgravity condition. The absence of buoyancy(which produces longer residence times) and the effects of thermophoresis produce a situation in which a significant concentration of soot is produced and accumulated into a soot-cloud. Results indicate that indeed the soot concentration within the microgravity droplet flames(with maximum soot volume fractions as high as ~60ppm) are significantly higher than corresponding values that are reports for normal-gravity flames. This increase in likely due to longer residence times and thermophoretic effects that manifested under microgravity conditions.

• Journal of the Korean Institute of Gas
• /
• v.18 no.6
• /
• pp.40-44
• /
• 2014

In this study, it is analyzed that a change in the shape of small propane containers made of STS304 when increasing of internal pressure. When internal pressure of a small propane container increased, bottom of end plate is convexly changed. This test is applied to a water bath pressure test to analyze the characteristics of the container. Water bath is able to analyze relationship between internal pressure and volume. In result, shape change section is confirmed because bottom of end plate is convexly changed. In addition, this section tend to decrease internal pressure because a volume increment increase out of proportion to pressure. The results of this study are expected to contribute to improving the safety of the pressure vessel, as well as various small propane container.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2004.05a
• /
• pp.45-50
• /
• 2004

In this study, we processed two procedures of application test of filler for special-purpose utility that are new application methods of aerated concrete and properties test of aerated concrete according to mixing ratio because we investigated the better use of aerated concrete as filler for fireproof safety and we proposed basic data about standardization of mixing of aerated concrete. We measured flow and volume change of aerated concrete. And if its volume doesn't change, we added measuring unit weight and compressive strength. To test application of aerated concrete as filler for fireproof safety, we filled up aerated concrete to fireproof safety according to suitable mixing ratio. Then we measured maximum temperature of inner part of fireproof safety in accordance with the standard test of fireproof. According to the results, aerated concrete as filler for fireproof safety could be possibly used. So when we make aerated concrete, we should consider using an adding agent as well as a foaming agent.

• Journal of the Korean Society of Safety
• /
• v.30 no.2
• /
• pp.83-89
• /
• 2015

In Korea for 20 years(1993-2012), total number and average annual number of oil spills were 6,608 cases and total volume and average annual volume of oils spilt were $57,328k{\ell}$ and nearly $2,866k{\ell}/year$, respectively. The annual number of oil spills and annual amount of oil spilt tended to decrease with the lapse of year in Korea. As oil transportation worldwide continues to increase, many communities are at risk of oil spill disasters and must anticipate and prepare for them. Factors that influence oil spill consequences are myriad and rage from the biophysical to the social. In this paper, we analysed the emergency response systems and recovery apparatuses for oil spill accident in marine and proposed a developed oil diffusion apparatus which can be used to initial response stage by crew, and to extend golden times. This system can be minimized casualties for rescued people in disaster.

• Nuclear Engineering and Technology
• /
• v.42 no.2
• /
• pp.211-218
• /
• 2010

An analysis model on debris transport in the containment floor of pressurized water reactors is developed in which the flow field is calculated by Eulerian conservation equations of mass and momentum and the debris particles are traced by Lagrange equations of motion using the pre-determined flow field data. For the flow field calculation, two-dimensional Shallow Water Equations derived from Navier Stokes equations are solved using the Finite Volume Method, and the Harten-Lax-van Leer scheme is used for accuracy to capture the dry-to-wet interface. For the debris tracing, a simplified two-dimensional Lagrangian particle tracking model including drag force is developed. Advanced schemes to find the positions of particles over the containment floor and to determine the position of particles reflected from the solid wall are implemented. The present model is applied to calculate the transport fraction to the Hold-up Volume Tank in Advanced Power Reactors 1400. By the present model, the debris transport fraction is predicted, and the effect of particle density and particle size on transport is investigated.

• Journal of the Korea Safety Management & Science
• /
• v.12 no.4
• /
• pp.255-263
• /
• 2010

The research developes short-run standardized control charts(SSCC) and short-run acceptance control charts(SACC) under the various demand patterns. The demand patterns considered in this paper are three types such as high-variety and repetitive low-volume pattern, extremely-high-variety and nonrepetitive low-volume pattern, and high-variety and extremely-low-volume pattern. The short-run standardized control charts developed by extending the long-run ${\bar{x}}$-R, ${\bar{x}}$-s and I-MR charts have strengths for practioners to understand and use easily. Moreover, the short-range acceptance control charts developed in the study can be efficiently used through combining the functions of the inspection and control chart. The weighting schemes such as Shewhart, moving average (MA) and exponentially weighted moving average (EWMA) can be considered by the reliability of data sets. The two types according to the use of control chart are presented in the short-range standardized charts and acceptance control charts. Finally, process capability index(PCI) and process performance index(PPI) classified by the demand patterns are presented.

• Journal of the Korean Society of Safety
• /
• v.13 no.3
• /
• pp.11-23
• /
• 1998

In this study, collapse test of thin-walled structure is performed under axially quasi-static and impact load in collapse characteristic to develop the optimum structural member for a light-oriented automobile. Furthermore, the energy-absorbing capacity is observed according to the variety of configuration(circular, square), aspect ratio in aluminum specimen to obtain basic data for the improved member of vehicle. In both quasi-static and impact collapse test, Al circular specimens collapse, in general, with axisymmetric mode in case of thin thickness while collapse with non-axisynmetric mode according to the thickness increase. For Al rectangular specimens, they collapse with axisymmetric mode in case of thin thickness, with mixed collapse mode according to the increase of thickness. In terms of initial max. load, Al square specimen turns out the best member among specimens, and then Al square, circular and circular with large scaling ratio, respectively. In case of quasi-static compression test, the absorbed energy per unit volume and mass shows higher in Al circular specimen, and then Al square, circular with large scaling ratio, respectively, according to shape ratio the absorbed energy per unit volume and mass in case of max. impact compression load is higher than that of static load. But the absorbed energy per unit volume and mass shows that Al circular specimen is the best member. Especially, unlike max. compression loan, the absorbed energy per unit volume and mass in impact test turns out the low value.

• Journal of Korean Home Economics Education Association
• /
• v.29 no.2
• /
• pp.23-39
• /
• 2017

The Purpose of this study is to present the basic data for selecting and improving the safety education contents which help practically middle school students through analysis of contents of safety education in 'field of home life' of 2009 revised middle school textbooks. The subjects of analysis are 12 types of middle school textbooks: in total 24 books written by 12 publishers in terms of the revised curriculum in 2009. The analysis criteria is developed by the researcher referring to preceding studies regarding safety education based on the seventh safety education standard presented by the Ministry of Education (2015). With such analysis criteria, all words related to the contents of the safety education of analysis criteria were extracted from each textbook, such as words directly mentioned as 'safety', words mean as 'psychological safety' and 'happy life', words related to 'attention', 'note', 'stability' etc. Under the analytic frame of safety education contents according to a home economics textbook, content analysis method was used for producing the frequency and percent of those words. The textbook analysis shows that the number of pages regarding safety education is 336.3 pages, as 9.8% in total 3,412 pages of 12 types of technology and home economics textbooks. As following the analysis of each textbook volume of the proportion in the contents related to safety education, 224.9 pages are on the first volume and 111.9 pages are on the second volume. As grades increase from year one to year three, the proportion of safety education in home economics textbooks is decreased. The highest number of safety education contents unit is 'Self-management of youth' which includes three parts of safety education. In the case of a unit for emphasizing practice, experience and practical exercise such as 'Life of youth' and 'Practice of eco-living', safety education content in the area of 'life safety' are mostly contained. Safety accidents related to the most student experienced, Household accidents (1.4%) and experiment or practice accidents (0.3%) are presented in a low figure. The contents of universal housing and school violence are duplicated on first and second volume of text. The most presented safety education content in the 12 types of textbooks are proper sexual attitude, dietary problems, family conflict and food choice. The least common contents are dangerous drugs, family welfare, internet addiction and industrial accident compensation insurance. As this study is to analyze 12 textbooks developed in 2009 revision curriculum, it is necessary to compare it with the textbook written by the revised curriculum in 2015 and to clarify the contents system of safety education and to avoid duplication of contents. In addition, it is necessary to develop and distribute a safety education program that can support textbooks.