• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.34 no.4
• /
• pp.1289-1298
• /
• 2014

Pavement crack sealing method, which is one of the methods to maintain and repair the road, prevents the extending of cracks by repairing cracks in its early occurrence and has already been applied to many roadworks in advanced foreign country for a long time. But in the conventional crack sealing method, traffic accidents occur frequently during the repair because it's commonly performed on the heavy traffic road or highway. It also has some difficulties in securing the safety of workers from the risk of burns caused by heated sealant. In an effort to solve these problems, automated pavement crack sealing machines such as ARMM, OCCSM, TTLS have been developed in advanced foreign country since early 1990s. Also APCS in 2004 and ACSTM in 2013 were already developed domestically. However, since these automated crack sealers developed from a number of research institutions have different test-bed conditions and productivity measurement models, it's difficult to compare and evaluate them objectively. In this study, the image processing time of the respective machines and the movement time of each motion on the work process were estimated by using fully autonomous mapping and semi-automatic mapping in order to measure the productivity in the same environmental conditions. In addition, the productivity measurement test-bed reflected domestic road characteristics was designed to estimate and compare the productivity of the automated crack sealing machines.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.22 no.4
• /
• pp.131-145
• /
• 2019

Korea has set up a radiation emergency planning zone based on the 「Act on Physical Protection and Radiological Emergency」 to protect residents living near nuclear power plants in the event of nuclear disasters. Little research has been conducted on the appropriateness of existing nuclear evacuation facilities because of a general lack of interest in nuclear accidents. This research addresses this gap by analyzing the location adequacy of evacuation facilities in Busan's emergency protection planning area based on vulnerable populations and accessibility analyses. The Gijang-gun which has the greatest risk, shows that only 4.05% of the total urban area was included in the evacuation service area within 5 minutes while only 36.93% of Geumjeong-gu and 37.23% of Haeundae-gu were included in the evacuation-enabled area. In addition, evaluation facilities in the elderly population hotspots were lacking, and there was a wide gap between dongs within the same Gu. Thus, additional evacuation facilities need to be designated and installed considering the spatial equity between areas and safety of both the public and vulnerable populations.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.16 no.2
• /
• pp.128-139
• /
• 2017

Railway is one of the public transportation systems along with shipping and aviation. With the recent introduction of high speed train, its proportion is increasing rapidly, which results in the higher risk of catastrophic failures. The wheel bearing to support the train is one of the important components requiring higher reliability and safety in this aspect. Recently, many studies have been made under the name of prognostics and health management (PHM), for the purpose of fault diagnosis and failure prognosis of the bearing under operation. Among them, the most important step is to extract a feature that represents the fault status properly and is useful for accurate remaining life prediction. However, the conventional features have shown some limitations that make them less useful since they fluctuate over time even after the signal de-noising or do not show a distinct pattern of degradation which lack the monotonic trend over the cycles. In this study, a new method for feature extraction is proposed based on the observation of relative frequency energy shifting over the cycles, which is then converted into the feature using the information entropy. In order to demonstrate the method, traditional and new features are generated and compared using the bearing data named FEMTO which was provided by the FEMTO-ST institute for IEEE 2012 PHM Data Challenge competition.

• Journal of Environmental Science International
• /
• v.25 no.4
• /
• pp.505-516
• /
• 2016

With the development of nanotechnology, nanomaterials are used in various fields. Therefore, the interest regarding the safety of nanomaterial use is increasing and much effort is diverted toward establishment of exposure assessment and management methods. Occupational exposure limits (OELs) are effectively used to protect the health of workers in various industrial workplaces. This study aimed to propose an OEL for domestic multi-walled carbon nanotubes (MWCNTs) based on animal inhalation toxicity test. Basic procedure for development of OELs was examined. For OEL estimation, epidemiological study and quantitative risk assessment are generally performed based on toxicity data. In addition, inhalation toxicity data-based no observed adverse effect level (NOAEL) and benchmark dose (BMD) are estimated to obtain the OEL. Three different estimation processes (NEDO in Japan, NIOSH in USA, and Baytubes in Germany) of OELs for carbon nanotubes (CNTs) were intensively reviewed. From the rat inhalation toxicity test for MWCNTs manufactured in Korea, a NOAEL of $0.98mg/m^3$ was derived. Using the simple equation for estimation of OEL suggested by NEDO, the OEL of $142{\mu}g/m^3$ was estimated for the MWCNT manufacturing workplace. Here, we used test rat and Korean human data and adopted 36 as an uncertainty factor. The OEL for MWCNT estimated in this work is higher than those ($2-80{\mu}g/m^3$) suggested by previous investigators. It may be greatly caused by different physicochemical properties of MWCNT and their dispersion method and test rat data. For setting of regulatory OELs in CNT workplaces, further epidemiological studies in addition to animal studies are needed. More advanced technical methods such as CNT dispersion in air and liquid should be also developed.

• Journal of the Korean GEO-environmental Society
• /
• v.21 no.6
• /
• pp.13-17
• /
• 2020

In the era of the fourth industrial revolution, drones are being used in various civil engineering fields. Currently, the construction and maintenance of slopes are generally managed by manpower. This method has a risk of safety accidents, and it is difficult to accurately evaluate the slope because it is difficult to secure the vision. In this paper, the effects of RTK and GCP on the 3D model of the slope were studied by using digital images taken by the drone. GNSS coordinates were measured for nine points to compare the quality of the slope 3D model, three points of which were used as the check points and the remaining points were used as GCPs. When making the 3D model of the slope using high-accuracy geotagging images using RTK, it was found that the error at the check point decreases as the number of GCP increases. Even if GNSS was used, it was found that the error at the check points of the 3D slope model was not significant when the GCPs were applied. However, it was found that even if high-accuracy geotagging images are used using the RTK module, a significant error occur when the 3D slope model is created without applying GCPs. Therefore, it can be stated that GCP must be applied to create the 3D slope model in which information about the height as well as plane information is important.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.45 no.7
• /
• pp.1035-1040
• /
• 2016

This study investigated the prevalence of foodborne pathogens and the bacterial community of traditional Doenjang collected from a longevity area in Korea as well as the antagonistic effect of traditional Doenjang isolates against Bacillus cereus to estimate the microbiological safety of traditional Doenjang. Aerobic bacteria showed $10^6{\sim}10^9CFU/g$, whereas coliform bacteria was not detected. Foodborne pathogens were not detected except B. cereus, which was detected in seven samples out of 10 Doenjang samples. A total of 327 isolates were identified from traditional Doenjang. The isolates consisted of Bacillus subtilis 155 (47.4%), Bacillus licheniformis 68 (20.8%), Bacillus amyloliquefaciens 46 (14.1%), and Bacillus pumilus 18 (5.5%). Antagonistic effect against B. cereus was detected in 20 (6.1%) of 327 isolates, which consisted of B. subtilis (12 strains), B. amyloliquefaciens (5 strains), and B. licheniformis (3 strains). The inhibitory zone for the antagonistic effect was 9.0~12.0 mm in diameter. Although a small amount of traditional Doenjang was tested in this study, these results indicated that the potential risk of B. cereus in traditional Doenjang is lower than generally presumed. It is necessary to monitor the antagonistic effect of traditional Doenjang isolates against B. cereus.

• Journal of Home Health Care Nursing
• /
• v.8 no.2
• /
• pp.121-134
• /
• 2001

The purpose of this study were to analyze the home care services and to evaluate the client's satisfaction with the home care services provided by home care service center in the C hospital. The data were collected by reviewing charts of 128 home care clients who were receiving home care services at C hospital from October 1997 to September 2000. The subjects for satisfaction of home care service were 20 clients from July 10 to September 30, 2000. The tool for measurement of present condition of home care service was developed by the researchers. The satisfactions of the home care services were measured by using the instrument developed by Im(997). The data were analyzed by using the SPSS/PC+. The results of this study were as followings : 1. Majority of the subjects was female(61.7%). The average of age was 63.5 years. The service has been used mostly by the elderly 60 years of age or older(71.1%). The economic level of most of subjects was in middle class(94.5%). 2. Majority of the subject had a cancer(55.4%), following stroke(25.0%). The average duration of disease for the subjects was 31 months. The average time of hospitalization for the subjects was 3.3 times. The duration of hospitalization was 10$\sim$30 days(26.6%), 30$\sim$60 days(23.4%) and above of the 210 days(9.4%). 3. Most of the subjects used his/her doctor (47.7%), as a consultant, following his/her nurse (28.1%), other patients or their family (21.9%). Most of reasons for a consultation were supportive management(Infusion or medication, 60.94%), following tube management(L-tube or T-tube, 25%), Foley catheter management (15.63%) etc. 4. 28 types of nursing diagnoses were used by the home care service. The nursing diagnosis altered nutrition: less than body requirement were used mostly by the home care service, following risk for infection, impaired skin integrity, impaired swallowing, ineffective airway clearance altered comfort: pain, impaired physical mobility. By the human-response pattern, exchanging(63.2%), moving(7.5%), feeling(10.4%), knowing(5.2%), communicating (2.6%), relating(0.5%) perceiving(0.4%) and choosing(0.3%). There were 42 nursing intervention types were performed by the home care service. By the NIC(nursing intervention classification. McCloskey. Bulech. 1996). physiologic: complex (30.3%) was the most, safety(28.3%), behavioral(20.0%), physiologic: basic(10.8%) and health system(1.7%). Observation or assessment was the most nursing intervention performed by the home care service. following IV infusion. vital sign observation. infusion management and fluid-electrolyte balance management. 5. The level of client's satisfaction with provided home care services showed considerably high(2.67/ 3).

• The Journal of Korean Medicine
• /
• v.27 no.3 s.67
• /
• pp.107-131
• /
• 2006

Background and Aims: Dansamtongmek-tang (DSTMT) and Dansamsengmek-san (DSSMS) have been used for many years as therapeutic agents for the acute stage of cerebrovascular disease, hypertension and hyperlipidemia in Oriental medicine, but the effects of DSTMT and DSSMS on hyperlipidemia and safety for cell damage are not yet well-known. This study was done to investigate the effects of DSTMT and DSSMS on hyperlipidemia. Methods: In vivo test: after administering DSTMT and DSSMS to SHR and ICR occurred hyperlipidemia for 3 weeks, we analyzed body weight, cholesterol levels. TG, HDL-chol, LDL-chol, LDH in plasma, brain, liver and kidney tissue, and DNA by RT-PCR. In vitro test: after administering DSTMT and DSSMS to human hepatocellular carcinoma in hypoxia, we observed cell cohesion by light microscope, analyzed the inflow of Ca2+ by confocal laser scanning microscope and DNA by RT-PCR. Results: DSTMT significantly decreased the levels of triglyceride and increased the levels of HDL-cholesterol in SHR, and significantly decreased the levels of LDL-cholesterol and body weight and increased the levels of HDL-cholesterol in ICR. DSSMS significantly decreased body weight, total cholesterol levels, LDL-cholesterol, LDH and cardiac risk factor (CRE) in SHR and significantly decreased the levels of total cholesterol, triglyceride, LDL-cholesterol, LDH and CRF in ICR. DSTMT had an effect on protecting cells from damage by inhibiting production of p53 mRNA, and in DSSMS, by inhibiting production of p53 mRNA and p21 mRNA after hypoxia. DSTMT effectively blocked off Ca2+ at low density, but DSSMS effectively blocked off Ca2+ at high density. Both DSTMT and DSSMS had an effect on inhibiting lipid metabolism by blocking off production of apo B mRNA. Conclusions: These results suggest that DSTMT and DSSMS might be usefully applied for treatment of hyperlipidemia and suppression of brain damage.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.4
• /
• pp.1591-1601
• /
• 2013

In this study, It is conducted for novice drivers about driving behavior and psychological characteristics analysis to reduce traffic accident risk and provide the basic data of education program development. Therefore, this study classified by the category-specific characteristics and hazard prediction through survey of the novice driver and unpredictable behavior and psychological characteristics were studied. The novice and general characteristics and driving behavior with vehicle simulators, comparison and analysis of the novice driver traffic safety education basic research direction based on the statistical results. Prediction the results of this study, the Hazard of the driver, speeding, traffic violation, information providing omission, abrupt change, the number of accidents in all areas novice driver is high compared to the general driver. In addition, Novice driver showed a statistically significant level of Hazard compared to the general driver target novice drivers and the general ability to predict Hazard of violation, abrupt change, and a number of traffic accidents were omitted level of speeding and other information providing level drivers all showed similar results. Vehicle simulator. The experimental results showed that novice drivers compared to drivers poorly overall driving performance. It showed a notable difference in the number of collisions, especially novice drivers compared to drivers in complex road traffic conditions due to a lack of driving experience and learning ability are considered.

• Parasites, Hosts and Diseases
• /
• v.40 no.1
• /
• pp.45-54
• /
• 2002

Field trials evaluating selected commercially available mosquito traps variously baited with light, carbon dioxide, and/or octenol were conducted from 18-27 September 2000 in a malarious area near Paekyeon-ri (Tongil-Chon) and Camp Greaves in Paju County, Kyonggi Province, Republic of Korea. The host-seeking activity for common mosquito species, including the primary vector of Japanese encephalitis, Culex tritaeniorhynchus Giles. was determined using hourly aspirator collections from a human and propane lantern-baited Shannon trap doting hours when temperatures exceeded $15^{\circ}C$. The total number of mosquitoes and number of each species captured during the test was compared using a block design. Significant differences were observed for the total number of mosquitoes collected, such that, the Mosquito MagnetTM with octenol > Shannon trap > ABC light trap with light and dry ice > Miniature Black Light trap (manufactured by John W. Hock) $\geq$ New Jersey Trap > ABC light trap with light only. Significant differences in numbers collected among trapes were noted for several species including: Aedes vexans (Meigen), Anopheles lesteri Baisas and Hu. An. sinensis Weidemann, An. sineroides Yamada, An. yatsushiroensis Miyazaki. Culex pipiens pallets Coquillett L., Cx. orientalis Edwards and Cx. tritaeniorhynchus. Host-seeking activity for most common species showed a similar bimodal pattern. Results from these field trap evaluations can significantly enhance current vector and disease surveillance efforts especially for the primary vector of Japanese encephalitis, Cx. tritaeniorhunchus.