• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 춘계학술대회 논문집
• /
• pp.772-779
• /
• 2008

Through this study, standard design guidelines for the high speed EMU have been derived to meet the crashworthiness requirements of the Korean rollingstock safety regulation. The crashworthiness regulation requires some performance requirements for two heavy collision accident scenarios; a train-to-train collision at the relative speed of 36 kph, and a collision against a standard deformable obstacle of 15 ton at 110 kph. The complete train set will be composed of 2TC-6M with 13 ton axle load, different from KTX with the power car of 17 ton axle load. Using theoretical and numerical analyses, some crashworthy design guidelines were derived in terms of mean crush forces and energy absorptions for main crushable structures and devices. The derived design guidelines were evaluated and improved using one dimensional spring-mass dynamic simulations. It is shown from the simulation results that the suggested design guidelines can easily satisfy the domestic crashworthiness requirements.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2018년도 추계 학술논문 발표대회
• /
• pp.134-135
• /
• 2018

Nuclear Power Plant consists of about 1.4 million facilities. and the design standards and design requirements for the continuos utilization and safety of facilities are complexly connected with the facilities. When a design change for facilities or design requirements is occurred at the time of construction or operation, there are a lot of facilities, design requirements, and design bases that are affected by the facilities or design bases being changed. The above design changes are so complex that the existing document-bases design change process is time-consuming and may also cause human error. In this study, we developed a design requirement taxonomy that can be applied to the data-centric design bases document that can improve it. To do this, we analyze the design elements from the highest level to the lowest level applied to the nuclear power plant, and classify the design elements according to the characteristics of the design elements.

• 한국컴퓨터정보학회논문지
• /
• 제22권5호
• /
• pp.29-39
• /
• 2017

In this paper, we analyse security threats and security requirements about the designated PC solution which restricts usable PCs that are only an user own PCs or a registered PC for online banking or very important services. Accordingly, causable threats of the designated PC solution are classified a process, a network layer, a software module, and an environment of platform, and we draw security requirements based on analysed security threats. Results of this research are considered utilization of criteria for improving security of the designated PC solution and standards for giving hint of imposition of the designated PC solution.

• 한국산학기술학회논문지
• /
• 제19권10호
• /
• pp.410-417
• /
• 2018

현대의 시스템은 지속적으로 대형화, 복잡화되어 왔기 때문에 시스템의 오류 발생 가능성이 커졌다. 시스템의 고장은 안전 사고를 발생시키고, 인명과 재산상의 막대한 피해를 줄 수 있다. 이러한 이유로 미 국방성과 IEC 등의 국제표준기구에서는 시스템의 안전성을 확보하기 위한 안전 관련 국제표준을 제정하였고, 시스템 설계와 안전 활동이 통합적으로 수행되어야 함을 권고하였다. 이에 따라 최근의 연구들은 모델기반 시스템 설계를 진행함과 동시에 모델을 활용하여 시스템의 안전성 검증을 수행하였다. 하지만 시스템 설계를 위한 모델과 안전성 분석 및 검증을 위한 고장모델을 서로 다른 모델링 언어를 기반으로 생성하였기 때문에 시스템 설계와 안전 활동이 통합적으로 수행되지 못하였다. 또한, UML 또는 SysML 기반으로 고장모델을 활용하여 안전 요구사항을 도출한 연구들은 안전 분석 및 검증에 고장모델이 제한적으로 활용되었다. 이와 같은 문제점을 해결하기 위해서 기존의 고장모델 활용법을 확장 시킬 필요가 있다. 우선 시스템 설계와 안전성 검증 활동을 통합적으로 수행할 수 있는 개선된 SysML 기반의 고장모델을 생성해야 한다. 다음으로 이 고장모델을 활용하여 도출된 안전요구사항이 시스템 설계에 제대로 반영되었는지 검증할 수 있어야 한다. 따라서 본 논문에서는 개선된 SysML 기반 고장모델의 개념과 생성 절차를 제시하였고, 자동차 시스템에 대한 고장모델을 생성하였다. 또한, 자동차 시스템의 안전성을 검증하기 위해서 고장모델의 시뮬레이션을 수행하였다. 이를 통해서 개선된 SysML 기반 고장모델을 활용하여 시스템 설계와 안전성 검증 활동을 수행할 수 있음을 보였다.

• 보건교육건강증진학회지
• /
• 제18권1호
• /
• pp.35-47
• /
• 2001

As the complexity of the our environment is further complicated by advancements in industry and increase in vehicle traffic flow, the incidents of injury causing accidents are on the rise. Consequently, there is increasing emphasis on the importance of systematic and continual safety education for injury preventive behaviors. This study investigates safety related problems of elementary school students based on the PRECEDE model, proposed by Green et al.(1980 Green), to comprehensively identify the requirements of school safety education. The identified requirements were used to diagnose the current state of elementary school safety education through the analysis of multidimensional factors. A questionnaire survey was conducted on 594 sixth grade students from randomly selected 4 schools in Seoul to examine their injury preventive behaviors and to determine the educational diagnosis variables that affect it. The duration of the survey was 3 weeks starting from April 12, 1999 to May 8, 1999. A summary of the survey results are presented below; 1. Situations in which accidents have occurred were, in their order of frequency, ‘during play or sports activities within the school grounds’ was most frequent at 59.6％, ‘during play on local streets’ at 49.5％, and ‘traffic accidents’ at 41.6％. 2. Categorization of the injury preventive behavior showed that ‘not playing at high traffic flow locations such as streets and construction sites’ had the higher level of observance, while ‘wearing of helmets and joint protection devices during playing’ was least observed. 3. Considering injury preventive behaviors in relation to educational diagnosis variables indicated, for predisposing factors, lower ‘perception to injury accidents’ (p〈0.001) combined with higher ‘concerns for injury accidents’(p〈0.001), ‘practice of preventive behavior’(p〈0.001), and ‘the level of safety knowledge’(p〈0.001) resulted in significantly higher observance of injury preventive behaviors. For enabling factors, higher ‘perceived level of the school safety education’ (p〈0.001) and ‘availability of safety education resources’(p〈0.01) indicated significantly higher observance of injury preventive behaviors. For the reinforcing factor, frequent exposure to ‘safety education brochure’ (p〈0.01) and ‘audio-visual material for safety education’(p〈0.01) combined with more ‘regional safety education’ (p〈0.01), ‘home safety education’ (p〈0.01), ‘school safety education’(p〈0.001), and, ‘parents’ observance of preventive behaviors' (p〈0.001) showed significantly higher observance of injury preventive behaviors. 4. An analysis of the factors that affect injury preventive behaviors showed that the enabling factor ‘awareness of school safety education’ had the highest correlation with injury preventive behaviors followed by factors, in their order of significance, ‘practice of preventive behavior’, ‘perception to injury accidents’, ‘level of safety knowledge’, ‘parents’ observances of preventive behaviors', and ‘concerns for injury accidents.’

• 한국안전학회지
• /
• 제22권5호
• /
• pp.7-12
• /
• 2007

The safety standard for suspended access equipments(SAE) is developed. During the development of the safety standard, consideration was given to a close examination of the standards existing in other industrialized regions and nations such as the Eu.opean Union(EU), the United States, and Japan, as well as the existing domestic safety regulation. Also, a consideration was given to the appraising of the technical level and market conditions of the domestic industry. After careful examination of the current safety practices and issues, it was decided that the standard under development should closely follow those of the EU safety standard. The EU standard provides a detailed account of the calculation methods, safety and stability factors, testing apparatus and procedure, all under unified framework. A number of specific safety requirements have been modified in an effect to properly reflect the difficulties faced by the domestic industry. It is hoped that the safety standard developed here can serve as a valuable tool for policy decisions regarding worker safety.

• 대한안전경영과학회지
• /
• 제10권4호
• /
• pp.73-81
• /
• 2008

The current electrical safety plan developed for the national electricity system has been playing an important role in handling a variety of electrical accidents. However, it can be more effective to prevent or reduce those accidents if a preventive electrical safety plan is available. In this paper, an approach to developing the safety plan is described. We first discuss the contents that should be included in the plan. Noting that an effective plan requires the system level consideration of all the factors affecting the safety issues, an operation concept document (OCD) is considered. The OCD can allow us to understand the behavior of the safety system based on the operation environment, the system functions, the performance requirements, all at the system level of the safety system. Thus, the OCD can be useful in developing the safety plan. A detailed description then follows on how the OCD is developed for the electrical safety system under study. Finally, we discuss how the developed OCD can be used in deriving the preventive electrical safety plan.

• 한국항공운항학회지
• /
• 제31권2호
• /
• pp.95-99
• /
• 2023

As our whole society has become increasingly aware of safety and emphasizes the importance of preventing safety accidents, the airline cabin service sector is also facing a strong demand to improve practical system for aviation safety education. In this regard, the development of appropriate safety education programs and the getting of human resources who can develop and operate such programs are becoming key issues. This study aims to provide academic and practical implications for safety education and training in airline cabins by reconfirming the importance and direction of safety education in the context of airline cabin services, and by specifying and establishing qualification requirements for personnel who develop and operate such safety programs. To this end, we review the content that should be included in safety training programs, the qualifications required of developers, managers, instructors, and examiners who develop or operate such programs, and how safety training programs can be continually improved as relevant conditions change in the future. In addition, we have also suggested ways to train appropriate managers, instructors, and examiners, including improving the compensation system for them, and how to effectively manage trainees. In order to secure a higher level of aviation safety in the future, it will be necessary to continue research on the development of more diverse and high-quality aviation safety education programs and the training of related personnel.

• 한국항행학회논문지
• /
• 제16권4호
• /
• pp.697-702
• /
• 2012

승강기 보급의 확산과 더불어 다양한 수요가 증가되고 있으며 그와 더불어 승강기 안전에 대한 요구가 필요하다. 승강기 안전요구는 무엇보다 비상사태에 빠르게 대응할 수 있는 능력이라 할 수 있다. 최근 승강기 안전을 위해 QR코드를 모든 승강기에 부착하여 승강기 구조 시 활용할 수 있도록 법제화 하였으며 CCTV와 직접통화장치 설치의 의무화를 통해 보다 안전한 승강기 활용을 모색하고 있다. 그러나 승강기 CCTV 및 직접통화장치는 개별적으로 운영되고 있으며 이를 통합한 모델을 제시되고 있지 않고 있다. 이에 본 논문에서는 CCTV와 직접통화장치의 통합과 더불어 스마트폰기반의 원격제어모델을 구축함으로써 보다 효율적이고 안전한 승강기 모델을 제시하고자 한다. 제시된 세 가지 기능의 통합은 재난발생시 보다 정확하고 신속한 대처를 가능하게하고 유지보수의 효율성을 높일 수 있을 것이다.

• 한국항공우주학회지
• /
• 제41권10호
• /
• pp.840-848
• /
• 2013

군용항공기 감항인증은 감항성을 가지고 요구된 성능과 기능을 발휘할 수 있음에 대한 정부의 인증이다. 북대서양조약기구(NATO)는 최대이륙중량 150kg 이상의 군용무인기에 대한 감항인증 요구도인 STANAG-4671을 2009년에 배포하였다. 최근 150kg 미만의 소형무인기에 대한 감항인증 요구도인 STANAG-4703을 내부적으로 배포하여 검토 중에 있다. 우리나라는 국제적으로 통용되는 감항인증 기준인 STANAG-4671을 기타감항인증 기준으로 준용하여 군용무인기에 적용하고 있다. 하지만 STANAG-4671은 중량에 관계없이 동일한 목표안전수준을 요구하여 낮은 중량의 중 소형무인기에 대해서는 목표안전수준이나 설계 요구도가 과도하게 적용될 수 있다. 따라서 본 연구에서는 군용무인기 분류와 감항인증 기준을 분석하고, 지상피해 평가기법을 적용하여 최대이륙중량별 목표안전수준을 제시하였다.