• Proceedings of KOSOMES biannual meeting
• /
• 2017.11a
• /
• pp.137-137
• /
• 2017

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.4 no.2
• /
• pp.141-150
• /
• 2012

Ship damage caused by maritime casualties leads to marine pollution and loss of life and property. To prevent serious damage from maritime casualties, several types of safety regulations are applied in ship design. Damage stability regulation is one of the most important safety issues. Designs of ships for long international voyages must comply with these regulations. Current regulations, however, do not consider the characteristics of the operating route of each ship and reflect only ship size and type of cargo. In this paper, a damage safety assessment was undertaken for a ship carrying radioactive waste in actual wave conditions. Damage cases for safety assessment were constructed on the basis of safety regulations and related research results. Hull form, internal arrangement, loading condition and damage condition were modeled for damage safety simulation. The safety simulation was performed and analyzed for 10 damage cases with various wave heights, frequency and angle of attack on an operating route. Based on evaluation results, a design alternative was generated, and it was also simulated. These results confirmed that damage safety analysis is highly important in the design stage in consideration of the operating route characteristics by simulation. Thus a ship designer can improve safety from damage in this manner.

• Journal of the Korean Institute of Navigation
• /
• v.24 no.1
• /
• pp.1-12
• /
• 2000

The ships over the certain navigation area or her length are required to carry charts under the relevant laws. Charts are indispensible to the ships and fishing vessel, because their crew should know the water depth and location of obstacle in order to avoid danger in the navigation and fishing area. But it was found that many ships do not carry proper charts onboard according to the research marine accidents files of marine accident inquiry agency, and questionnaire survey. Consequently, many ships run aground on the coast and port. This study examined the present status of the coastal ship and the fishing vessels, and explained some problems in the aspect of the covering area, the place, the number of the selling agent and adjoining chart, as well as the geographical and traffic density, the crew on board the ship's characteristics, and so on. In this study we propose the way to solve the problem. firstly, the category of the fishing vessel which should carry the chart on bard under the related laws are required to be lowered to 10 gross tons. Besides a ship inspector should examine if the charts covering the area where to navigate even when the temporary inspection is done are carried on board property. Secondly, the inspection body or the controlling office of ship's entry and departure should check throughly whether the ships concerned carry the chart on board. Thirdly the fishing vessels should used the fishing charts, and the body concerned should train the offices about how to use chart, especiany the difference between Tokyo datum and WGS-84 datum. Fourthly the customized chart such as an atlas like a map, a calenda-type chart, a small chart, as a coated chart needs to be publish for the safety of small ship and fishing vessel. Fifthly, it is advisable to draw a recommended course in the route where the coastal navigate mainly and in the narrow channel, The adjoining area should be improved, as well as the qualify of the chart paper. Sixthly, publication of additional new chart in the southern part of East Sea, the eastern part of South Sea, the western part of South Sea and middle part of Yellow Sea near Incheon port should be thought over. Seventhly, the number of chart selling agent should be increased for the sake of purchaser in proportion to the number of port, and small correction of charts in selling agent must be carried out completely.

• Journal of Navigation and Port Research
• /
• v.45 no.6
• /
• pp.352-359
• /
• 2021

This paper presents the definition and importance of ship-centric direct communication concerning ship safety of maritime autonomous and unmanned ships. It also proposes the concept of MX-S2X communication based on high frequency for wide-bandwidth technology and describes the design and simulation result for the physical layer of MX-S2X. It considered high-speed communication as well as overcoming maritime multi-path fading required to be resolved in the marine environment. The physical layer of MX-S2X communication was designed to overcome the occurrence of error-floor caused by multi-path fading even with receiving sufficient signal strength. To this purpose, a performance analysis was conducted on the physical layer by applying the channel model of the actual maritime communication environment. As a result of the performance analysis of the MX-S2X physical layer, it was confirmed that the BER error-floor observed in the VDE physical layer test was overcome, and it operated within the SNR 2dB degradation range compared to the AWGN channel. It is expected that this will show enough performance suitable for short-distance ship-centered direct communication and can be used for direct communication of maritime autonomous ships, unmanned ships, and group navigation of themshortly.

• Journal of Navigation and Port Research
• /
• v.47 no.1
• /
• pp.10-17
• /
• 2023

A series of studies on the development of autonomous surface ships have been promoted in domestic and foreign countries. One of the main technologies for the development of autonomous ships is path-following control, which is closely related to securing the safety of ships at sea. In this regard, the path-following performance of an autonomous ship should be first evaluated at the design stage. The main aim of this study was to develop a visual and quantitative evaluation method for the path-following control performance of an autonomous ship at the design stage. This evaluation technique was developed using a computational fluid dynamics (CFD)-based path-following control model together with a line-of-sight (LOS) guidance algorithm. CFD software was utilized to visualize waves around the ship, performing path-following control for visual evaluation. In addition, a quantitative evaluation was carried out using the difference between the desired and estimated yaw angles, as well as the distance difference between the planned and estimated trajectories. The results demonstrated that the ship experienced large deviations from the planned path near the waypoints while changing its course. It was also found that the fluid phenomena around the ship could be easily identified by visualizing the flow generated by the ship. It is expected that the evaluation method proposed in this study will contribute to the visual and quantitative evaluation of the path-following performance of autonomous ships at the design stage.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.6
• /
• pp.783-788
• /
• 2021

Although the Korean government (Ministry of Ocean and Fisheries) and related organizations are enforcing many policies to improve the marine safety of vessels with weak safety management, the effectiveness of each policy is deficient due to the lack of a risk assessment method for ship safety management. Most previous studies in Korea of the risk assessment of ships only dealt with fragmentary risks of individual marine accident risks, so a new assessment method for comprehensive marine accident risk is needed. Examples of comprehensive risk assessments for ship safety management are the selection method for inspection targets by the Port State Control and the Norwegian Maritime Authority. In this study, indicators for the comprehensive risk assessment of ship safety management were developed for and applied to coastal/offshore fishing vessels that occupy a high proportion of the registrations and marine accidents in Korea. As a result, the risk of each ship was confirmed quantitatively, and a ranking of the weakness factors for ship safety management was identified.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.5
• /
• pp.681-688
• /
• 2018

As environmental regulations have been strengthened and high fuel efficiency has been in demand in recent years, the number of ships using natural gas as a fuel is increasing. The demand for ships using LPG or methanol, which are emerging as eco-friendly vessel fuels, is also increasing. In this perspective, ME-LGI engines using LPG or methanol as a fuel have attracted considerable attention. Ships equipped with an ME-LGI engine are required to check the reliability of the fuel injection valve during shipping. This means that the development of a fuel injection valve tester is essential for the commercialization of ME-LGI engine. This study conducted the conceptual design of a fuel injection valve tester for ME-LGI engines using a system engineering process in the order of requirements analysis, functional analysis, and design synthesis. In the requirement analysis stage, the operating process of fuel injection valve was analyzed, and the necessity of checking the sealing oil leakage was then derived. In the functional analysis stage, the functions and flow of them were defined at each functional level. In the design synthesis stage, the equipment for each function was set and the process block diagram based on it was derived. In addition, preliminary risk analysis was performed as a part of system analysis and control, and safety measures were added to the conceptual design. This study is expected to be a good reference material for the concept design of other systems in the future because it shows the application process of a system engineering process to the conceptual design in detail.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.2
• /
• pp.263-268
• /
• 2016

A rapid increase of data amount, used in ship-to-ship transmission of safety and logistics information, ships in the inland sea have trouble transmitting real-time information transmission due to an increase in traffic load caused by data transmitted by land station and offshore ships. In this study, therefore, communication is carried out by adaptively controlling the detailed beam width based on the distribution of offshore ships in land station durable in marine environment. Then after the adaptive sector system enabling real-time communication support between ships concentrated in an inland sea and land station is applied, the performance verification is conducted based on the respective Call Blocking Rates of an omnidirectional antenna, fisted sector system, and adaptive sector system. The performance verification result shows that adaptive sector system has better performance than the fixed sector system as the density of ship, q value, increases, and that the smaller the beam width is, the better performance of adaptive sector system will be.

• Journal of Navigation and Port Research
• /
• v.47 no.1
• /
• pp.1-9
• /
• 2023

Many studies have analyzed marine accidents, and since marine accident information is updated every year, it is necessary to periodically analyze and identify the causes. The purpose of this study was to prevent accidents by identifying and analyzing the causes of marine accidents using previous and new data. In marine accident data, 1,921 decisions by the Korea Maritime Safety Tribunal on marine accidents on fishing ships over 16 years were collected in consideration of the specificity of fishing ships, and 1,917 cases of accident notification text history by the Ministry of Maritime Affairs and Fisheries over 3 years were collected. The decision data and text data were classified according to variables and quantified. Prior probability was calculated using a Bayesian network using the quantified data, and fishing ship marine accidents were predicted using backward propagation. Among the two collected datasets, the decision data did not provide the types of fishing ships and fishing areas, and because not all fishing ship accidents were included in the decision data, the text data were selected. The probability of a fishing ship marine accident in which engine damage would occur in the West Sea was 0.0000031%, as calculated by backward propagation. The expected effect of this study is that it is possible to analyze marine accidents suitable for the characteristics of actual fishing ships using new accident notification text data to analyze fishing ship marine accidents. In the future, we plan to conduct research on the causal relationship between variables that affect fishing ship marine accidents.

• Journal of Navigation and Port Research
• /
• v.46 no.3
• /
• pp.209-215
• /
• 2022

On the Jeju coast, international cruise ships, passenger ships, and other ships pass frequently, as well as many fishing boats. Thus, there is a high risk of marine accidents and frequent ship collisions. Accordingly, it is urgent to establish a coastal VTS for systematic safety management of ships passing through the coastal waters of Jeju. The purpose of this study was to set the area of the VTS to be newly established. In this study, to calculate the workload of the VTS operators, a formula was proposed that reflects the monitoring workload considering the monitoring frequency and required time for target as well as non-target ships and the workload for ship collision situations. The proposed formula was applied to the newly established VTS area in Jeju. Three control sectors were set up in each VTS center. The average number of workstations per hour was approximately 1, so the division between sectors was appropriate. Thus, it was deduced that there would be no workload for the VTS operators. It is expected that the method proposed in this study can be used as primary data for calculating the appropriate number of workstations for the current VTS, and setting the VTS area for a new coastal VTS in the future.