• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.spc
• /
• pp.44-49
• /
• 2022

It is necessary to establish a marine environment management system in Korea for hazardous noxious substances (HNS) effluent from marine industrial facilities because the Marine Environment Management Act primarily focuses on pollution control from vessels and offshore man-made structures. In this study, we investigated the effluent guidelines of foreign cases focusing on the US Environmental Protection Agency (US EPA), which provides detailed information on the action levels and establishing principles for the industrial wastewater discharge of HNS. Based on the review, we also considered appropriate options for establishing new guidelines for Korea.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.26 no.6
• /
• pp.601-605
• /
• 2020

In large ships with complex structures, it is difficult to locate workers. In particular, it is not easy to detect when a worker falls down, making it difficult to respond quickly. Thus, research is being conducted to detect fallen workers using a camera or by attaching a device to the body. Existing image-based fall detection systems have been designed to detect a person's body parts; hence, it is difficult to detect them in various ships and postures. In this study, the entire fall area was extracted and deep learning was used to detect the fallen shipworker based on the image. The data necessary for learning were obtained by recording falling states at the shipyard. The amount of learning data was augmented by flipping, resizing, and rotating the image. Performance evaluation was conducted with precision, reproducibility, accuracy, and a low error rate. The larger the amount of data, the better the precision. In the future, reinforcing various data is expected to improve the effectiveness of camera-based fall detection models, and thus improve safety.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.6
• /
• pp.1002-1012
• /
• 2022

As the fourth industrial revolution (Industry 4.0) evolves, studies on autonomous ships have been conducting in the shipping industry. Currently, two or three degrees of autonomous ships is in operation, and a shore remote control of icer (SRCO) monitors vessel operations and intervenes remotely where necessary in the service. However, as the curriculum for an SRCO has not been established internationally, the risk of an accident by an unqualified SRCO is increasing. In this study, specifies the curriculum required for SRCO that consists of suitable existing training and new training under remote control circumstances. This includes Non-technical skill training to enhance the effectiveness of an SRCO. This curriculum can be used for a new SRCO to evaluate training and competency specific safety standards, and to enable existing seafarers to become SRCOs through the necessary training.

• Journal of the Korean Institute of Navigation
• /
• v.23 no.3
• /
• pp.17-28
• /
• 1999

Concerns related to the safety of bulk carriers we, most of all, the increasing number of bulk carrier accidents which amount to 425 during last 20 years; half of them are totally lost. A number of bulk tarriers are still missing. Bulk carrier safety has become an international issue since 1995. The International Maritime Organization (IMO) embarked on the legislation as a countermeasure to the increasing number of the bulk carrier accidents. The IMO discussed in the safety of bulk carriers including the strength of transverse watertight bulkheads, especially when the ship carries high density cargoes and the damage stability of bulk carriers in the flooded condition. In this study, statistics and causes of accidents of bulk carriers are analyzed in order to identify special features of bulk carrier accident and causes of the casualty. This study examines certain cases of hull collapses and severence which resulted in sinking to infer possible causes of missing ships.

• Proceedings of the Korean Institute of Industrial Safety Conference
• /
• 1997.11a
• /
• pp.135-142
• /
• 1997

For lighting of dark and hazardous workplaces such as compartments of ships under construction, workers should use hand lamps of explosion-proof type. However, the heavy weight of such lamps has prevented most impatient workers from using such types of lamps extensively. In this paper, ire developed a light weight hand lamp of intrinsic safety type which reduced the weight a lot while maintaining or improving the lighting and explosion-proof function. We made a Prototype which consisted of lamp fixture and low/high frequency power supply. Testing results show that the hand lamp meets well all the explosion-proof testing requirements of the Korea Industrial Safety Corporation.

• Journal of Navigation and Port Research
• /
• v.37 no.5
• /
• pp.499-509
• /
• 2013

Seafarers are one of the main engines driving economic growth in the maritime sector. The International Maritime (IMO) Organization estimated that there were approximately 1.5 million seafarers around the world engaged in international trade in 2012. Data have shown that human casualties in maritime accidents around Japan have shown an increasing trend over the last ten years. One cause is human error, which is inseparable from the human element that influences mariner's decisions and actions. The Personal Identification (PIN) Safe method is one way to systematically identify substandard and unsafe actions by considering the error taxonomies associated with various scenarios for a maritime system. The results are based on analysis of the role of the human element in commonly reported unsafe actions when interacting with equipment and other systems. Furthermore, patterns of influencing shaping factors were observed on the basis of data processing; the aim of this study was to promote safety culture and provide an opportunity to improve safety at sea.

• Journal of the Korean Society of Industry Convergence
• /
• v.23 no.4_2
• /
• pp.661-667
• /
• 2020

The optimal shape modeling of core parts through 3D modeling and structural analysis for the development of small and medium-sized ships. The goal is to improve the efficient structure of the hydraulic system for controlling the rudder among the core steering parts in small and medium-sized ships. Through 3D modeling and structural analysis, a new concept of tiller parts and a double-acting hydraulic cylinder control system were proposed and operational structural stability was evaluated. Structural analysis of the three different tiller designs that can be replaceable onto existing fishing vessels was conducted to derive the final shapes. The emphasis was placed on evaluating the structural stability of the key drive components, the tiller, pin, and cylinder rodin the maximum torque condition of the hydraulic cylinder.

• Proceedings of the KSME Conference
• /
• 2000.11b
• /
• pp.615-620
• /
• 2000

Manoeuvrability of ships has been receiving a great deal of attention both concerning navigation safety and the prediction of ship manoeuvring characteristics, especially at the preliminary design stage. Recently, in order to improve manoeuvrability of ships, High-lift devices could be applied to design of rudder at design stage. Now, among the them, we carried out the flow visualization and investigation of flow field around a flapped rudder(trailing-edge flap). A trailing-edge flap is simply a portion of the trailing-edge section of airfoil that is hinged and which can be deflected upward or downward. Flow visualization results of flap defection shown as follow Photos including main body and flap defection.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2009.10a
• /
• pp.239-240
• /
• 2009

Vessels stability problems need to resolve the nonlinear mathematical models of rolling motion. For nonlinear systems subjected to random excitations, there are very few special cases can obtain the exact solutions. In this paper, the specific differential equations of rolling motion for intact ship considering the restoring and damping moment have researched firstly. Then the partial stochastic linearization method is applied to study the response statistics of nonlinear ship rolling motion in beam seas. The ship rolling nonlinear stochastic differential equation is then solved approximately by keeping the equivalent damping coefficient as a parameter and nonlinear response of the ship is determined in the frequency domain by a linear analysis method finally.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2004.05a
• /
• pp.85-89
• /
• 2004

The paper presents a summary of the multidisciplinary/optimization method for the preliminary design of container feeder vessel. The current scenario in the ship building industry highly focuses on container ship design and construction proving the inherent demand in maritime industry. The design accomplishes the outer circle of the design spiral giving stress in areas of Hull Form Design, Resistance & Propulsion. Empirical relations, model test results, data from built ships, class rules and latest market demands stood as the criteria for the design. Optimization of the design as per the owners requirement. class rules, and the trade route selected are the major challenges met with. Strength. reliability, structural safety and stability have been incorporated in compromising standards.