• Journal of the Korean Institute of Gas
• /
• v.23 no.2
• /
• pp.35-44
• /
• 2019

One of the key factors of a safe workplace is to communicate with the workers about safety. For this, natural gas workplace is developing and operating related programs or communication activities. But, if there are silence behavior of the workers on the safety issues in this process, no positive outcomes could be expected for the workplace. The purpose of this study is to examine how safety silence motives, silence behavior, and safety communication influence each other. A total of 233 questionnaires based on the workers of natural gas workplace (in Seoul and Gyeonggi) were analyzed. The confidence analysis is to check consistency of the questions, analysis of the correlations between factors, and regression analysis to verify the hypotheses. As a result, the safety silence motives affected safety communication more seriously than the silence behavior did. Safety communication influenced safety silence motives more significantly than the silence behavior. The safety silence motives can be one of the reasons for safety communication to fail, and it was confirmed that a good safety communication does not necessary mean that there is no safety silence motivation. Based on such results, it is expected that improving and developing the safety communication activities of the workplace, it would improve safety in workplace in general.

• The Journal of Korean Society for School & Community Health Education
• /
• v.4
• /
• pp.79-95
• /
• 2003

This dissertation aims to analyze various safety accidents taking place during physical education class according to physical education teacher's value orientation, to identify teacher's value orientation that can minimize safety accidents, and to provide basic materials for safe and smooth class management. For this purpose, data have been collected from 261 physical education teachers at some middle and high schools in G City in Kyung-Ki Province and Busan Metropolitan City. The materials were treated as follows: The variables on demographic characteristics of physical education teachers are determined by t-test ; The analysis of one-way ANOVA and relationship between value orientation and safety accident prevention activities was conducted through Pearson's linear correlation analysis and multiple regression; The analysis of the relationship between value orientation and actual conditions of safety accidents was conducted through logistic regression. First, there is almost no awareness difference of physical education teachers' value orientation according to demographical variables. The value orientation physical education teachers consider to be the most important is, however, mainly 'mastery of disciplinary lesson.' There is a statistically significant difference in safety accident prevention activities according to demographical variables. Teachers' focuses in class contents showed a significant difference according to teaching experience and working area, while the dependency on facility has a significant difference according to teaching experience and school type. Second, there is no correlation between physical education teacher's value orientation and safety accident prevention activities because there is virtually no statistically significant difference between them. It means that safety accident prevention activities are not related with on which teachers place emphasis among mastery of disciplinary lesson, social reconstruction, self-realization, ecological integration and value orientation on learning process. Third, the analysis of safety accident prevention activities according to physical education teachers' value orientation revealed that the lower value orientation in social reconstruction is, the more safety accidents teachers experience. It is also found that crashes among students, ball games and leg injuries are inter-related with social reconstruction in value orientation, over-motivation and unskilled motor function ; athletic sports with value orientation on learning process and safety prevention training ; unskilled motor functions with value orientation in ecological integration and disobedience to teacher's directions ; winter accidents with mastery of disciplinary lesson in value orientation. In conclusion, the research indicates that physical education teacher's value orientation according to demographical variables didn't show any significant difference, while one according to safety accident prevention activities showed significant difference. Besides, physical education teachers' value orientation is not related to safety accident prevention activities, but the relationship between value orientation and actual conditions of safety accidents showed correlations according to each variable. Especially, teachers with lower value orientation in social reconstruction experienced more safety accidents. Therefore, physical education teachers can manage physical education class more safely with more emphasis on value orientation in social reconstruction.

• Journal of Digital Contents Society
• /
• v.16 no.3
• /
• pp.417-424
• /
• 2015

The research of occupational injury for safety and health is a comparatively recent occurrence. As labor activities took place regarding to employee concerns in industrial uprising, human resources health was tried to enhanced as a labor safety subject. Noticing that traditional statistics approach has limitations in learning future forecasting and major factors causing occupational injuries in each industry, Korean Government initiated a quantitative systematic simulation model project to analyze how the annual injury rate has been dropped and stays in a level for recent years. From this motivation and the project, system dynamics models have been developed to explain the mechanisms for reducing annual injury rate, and the mechanisms quantitatively. The main cause effects for the reduction of annual injury rate were due to the government driven investment on safety facilities. In overall viewpoint the gain achievable from these efforts has been reached a saturated level. However, it could reduce the annual injury rate if you chose the industry and size carefully. The model for forecasting, major injury factors, safety budget and allocation are introduced and analyzed, and Analyzing occupational injury related factors can also reduce employee injury and disease related costs, including medical care, quit, and disability assistance costs.

• Journal of the Korea Society for Simulation
• /
• v.20 no.1
• /
• pp.19-28
• /
• 2011

The safety applications based on the IEEE 802.11p, periodically transmit the safety-related information to all surrounding vehicles with high reliability and a strict timeline. However, due to the high vehicle mobility, dynamic network topology and limited network resource, the fixed beacon scheduling scheme excess delay and packet loss due to the channel contention and network congestion. With this motivation, we propose a novel beacon scheduling algorithm referred to as spatial-aware(SA) beacon scheduling based on the spatial context information, dynamically rescheduling the beaconing rate like a TDMA channel access scheme. The proposed SA beacon scheduling algorithm was evaluated using different highway traffic scenarios with both a realistic channel model and 802.11p model in our simulation. The simulation results showed that the performance of our proposed algorithm was better than the fixed scheduling in terms of throughput, channel access delay, and channel load. Also, our proposed algorithm is satisfy the requirements of vehicular safety application.

• Safety and Health at Work
• /
• v.15 no.1
• /
• pp.24-32
• /
• 2024

Background: Learning from incidents for accident prevention is a two-stage process, involving the investigation of past accidents to identify the causal factors, followed by the identification and implementation of remedial measures to address the identified causal factors. The focus of past research has been on the identification of causal factors, with limited focus on the identification and implementation of remedial measures. This research begins to contribute to this gap. The motivation for the research is twofold. First, previous analyses show the recurring nature of accidents within the Ghanaian mining industry, and the causal factors also remain the same. This raises questions on the nature and effectiveness of remedial measures identified to address the causes of past accidents. Secondly, without identifying and implementing remedial measures, the full benefits of accident investigations will not be achieved. Hence, this study aims to assess the nature of remedial measures proposed to address investigation causal factors. Method: The study adopted SMARTER from business studies with the addition of HMW (H - Hierarchical, M - Mapping, and W - Weighting of causal factors) to analyse the recommendations from 500 individual investigation reports across seven different mines in Ghana. Results: The individual and the work environment (79%) were mostly the focused during the search for causes, with limited focus on organisational factors (21%). Forty eight percentage of the recommendations were administrative, focussing on fixing the problem in the immediate affected area or department of the victim(s). Most recommendations (70.4%) were support activities that only enhance the effectiveness of control but do not prevent/mitigate the failure directly. Across all the mines, there was no focus on evaluating the performance of remedial measures after their implementation. Conclusion: Identifying sharp-end causes leads to proposing weak recommendations which fail to address latent organisational conditions. The study proposed a guide for effective planning and implementation of remedial actions.

• Nutrition Research and Practice
• /
• v.6 no.6
• /
• pp.542-550
• /
• 2012

This pilot study was performed to produce data of the Children's Dietary Life Safety (CDLS) Index which is required by the Special Act on Safety Management of Children's Dietary Life and to evaluate the CDLS Index for 7 metropolitan cities and 9 provinces in Korea. To calculate the CDLS Index score, data regarding the evaluation indicators in the children's food safety domain and children's nutrition safety domain were collected from the local governments in 2009. For data regarding the indicators in the children's perception & practice domain, a survey was conducted on 2,400 5th grade children selected by stratified sampling in 16 local areas. Relative scores of indicators in each domain were calculated using the data provided by local governments and the survey, the weights are applied on relative scores, and then the CDLS Index scores of local governments were produced by adding scores of the 3 domains. The national average scores of the food safety domain, the nutrition safety domain and the perception and practice domain were 23.74 (14.67-26.50 on a 40-point scale), 16.65 (12.25-19.60 on a 40-point scale), and 14.88 (14.16-15.30 on a 20-point scale), respectively. The national average score of the CDLS Index which was produced by adding the scores of the three domains was 55.27 ranging 46.44-58.94 among local governments. The CDLS Index scores produced in this study may provide the motivation for comparing relative accomplishment and for actively achieving the goals through establishment of the target value by local governments. Also, it can be used as useful data for the establishment and improvement of children's dietary life safety policy at the national level.

• Journal of Biomedical Engineering Research
• /
• v.36 no.3
• /
• pp.69-78
• /
• 2015

Ultrasonic physiotherapy systems should comply with IEC 60601-2-5(particular requirements for safety of ultrasonic physiotherapy equipment) standard for safety of patients and clinical performances. One of the most important parameters in the standard is the effective radiating area ($A_{ER}$). It has to be measured in accordance with IEC 61689 (field specifications and methods of measurement in the frequency range 0.5MHz to 5MHz). Typical ultrasonic physiotherapy system works in the frequency range 1MHz ~ 3MHz to comply with the IEC 61689. However, ultrasonic physiotherapy system using frequencies over 5MHz is out of the IEC 61689's scope. That is, even if such ultrasonic physiotherapy systems are developed by demands of the market, there is no standard to apply. It is the motivation for this study. Whereas there are other parameters to be considered, this study focuses on the effective radiating area and shows effectiveness of applying IEC 61689 in measuring effective radiating area of ultrasonic physiotherapy systems using frequency range over 5MHz by comparing the results of computer simulation and experiment. Results of this study shows that applying the IEC 61689 standard to ultrasonic physiotherapy system using frequency range over 5MHz is possible.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.16 no.3
• /
• pp.146-152
• /
• 2017

Stabilizing the operation of dual fuel diesel engines is very important. The shipbuilding industry is rapidly growing, but gear components requiring reliability are still imported from other countries. The reasoning for this is three-fold. Firstly, it is compulsory that all ships must use devices that meet the performance standards specified in the Safety of Life at Sea (SOLAS) and the convention of MARine POLlution (MAPOL) to prevent pollution caused by ships. Secondly, most ships must comply with the ship classifications specified by ship owners. Therefore, it is specified that key engine gear components must be inspected and authorized for the quality and performance specified by the Ship Register Authority. Thirdly, it is essential that devices (engine gear) for human safety in ships comply with quality standards specified in the regulations and rules by the government. The Ship Register Authority's strict quality standards and approval requirements contribute to the reduction of motivation towards new investment and technology development by device component manufacturers. Therefore, this study aims to develop a method for using infrared thermography to examine gear reliability in order to ensure gear component reliability and national competitiveness in the global market.

• Journal of the Korea Safety Management & Science
• /
• v.7 no.4
• /
• pp.141-163
• /
• 2005

The international SPICE (Software Process Improvement and Capability determination) Project ISO/IEC 15504(SPICE : Software Process Improvement and Capability determination) is an emerging International Standard on SPA(Software Process Assessment). A prime motivation for developing this standard has been the perceived need for an internationally recognized software process assessment framework that pulls together the existing public and proprietary models and methods. A SPICE assessment can be considered as one of representative SPA model since assessors assign ratings to indicators and metrics to measure the capability of software process. But this models doesn't provide a systematic measurement procedures and dynamic method for SPI(Software Process Improvement). Through the evaluation of SPICE is capable of providing a substantiated basis for using the notion of capability, as well as providing information for nacessary improvements to the standard using 6sigma process. As a result, this paper propose a measurement procedure and guidelines for application of 6sigma process to guarantee the reliability in SPI and suggest the structure to support SPI on overall organization.

• Journal of the Korea Safety Management & Science
• /
• v.13 no.4
• /
• pp.91-100
• /
• 2011

Main motivation for this study was to identify the relationship between high-risk hospital jobs and their symptoms associated. This study has three objectives; 1) Evaluate major jobs of hospital workers based on Criterion(Notification number 2003-24 from Ministry of Labor in Korea) for high-risk musculoskeletal disorders(MSDs), 2) Relate each jobs in criterion and the hospital jobs considered in this study, 3) Relate each jobs in criterion and MSDs symptoms of hospital workers. A total 141 hospital jobs was evaluated. Specifically, a total 688 hospital workers participated in the questionnaire survey in this study. There were two most jobs belonged to the numbers 2 and 4 from criterion. Most hospital workers participated in this study thought that the numbers 1 and 2 from criterion were associated with their jobs. In terms of MSDs symptoms, the numbers 1 and 2 from criterion were associated with their jobs as well. Further study for hospital jobs should be focused on breaking down quantification levels of each numbers in the criterion due to its atypical and non-repetitive job characteristics of hospital jobs.