• 한국안전학회지
• /
• 제23권4호
• /
• pp.7-12
• /
• 2008

This study proposes integrity evaluation method of weld zone in titanium using titanium distance amplitude characteristics curve(TDACC) and ultrasonic signals. For these purposes, the ultrasonic signals for porosity defects of weld zone in titanium are acquired in the type of time series data and echo strength. 4 lines in the DACC indicated damage evaluation standard of weld zone in titanium. The acquired ultrasonic signals agree fairly well with the measured results of reference block and sensitivity block(defect location, bean1 propagation distance, echo strength, etc). The proposed TDACC in this study agree fairy well with the measured results of weld zone in titanium(weld defects as porosity). The proposed TDACC in this study can be used for integrity evaluation of weld zone in titanium.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 춘계학술대회 논문집
• /
• pp.249-254
• /
• 2007

A PSD which cooperates with train door provides safety and convenience for passengers. In order to cooperate with train door, the PSD should interface between the PSD control system and the control units of train door. This interface is generally performed in signaling system(ATC/ATO), however, the lines which don't have the interface functionality in the signaling system, it is required to have additional "PSD inter face system" to communicate between train and PSD. In this paper, we propose a safe PSD interface methodology by discussing interlocked control between train door and PSD, recognition of accuracy stop point, troubleshooting logic and log of troubles and driver panel which are adopted in Inchon line1.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2002년도 춘계학술대회
• /
• pp.91-97
• /
• 2002

In this thesis presents line balancing problems of two-sided and mixed model assembly line widely used in practical fields using genetic algorithm for reducing throughput time, cost of tools and fixtures and improving flexibility of assembly lines. Two-sided and mixed model assembly line is a special type of production line where variety of product similar in product characteristics are assembled in both sides. This thesis proposes the genetic algorithm adequate to each step in tow-sided and mixed model assembly line with suitable presentation, individual, evaluation function, selection and genetic parameter. To confirm proposed genetic algorithm, we apply to increase the number of tasks in case study. And for evaluation the performance of proposed genetic algorithm, we compare to existing algorithm of one-sided and mixed model assembly line. The results show that the algorithm is outstanding in the problems with a larger number of stations or larger number of tasks.

• 한국안전학회지
• /
• 제20권1호
• /
• pp.30-35
• /
• 2005

This study proposes construction of through transmission for weld defects detection of rail weld zone from ultrasonic signals. For these purposes, the ultrasonic signals for defects(porosity and crack) of weld zone in rails are acquired in the type of time series data and echo strength. 6 lines in the distance amplitude characteristics curve(DACC) indicated damage evaluation standard of weld zone in rails. The acquired ultrasonic signals agree flirty well with the mesured results of reference block and sensitivity block(defect location beam propagation distance, echo strength, etc). The proposed construction of through transmission in this study can be used for weld defects detection of rail weld zone.

• 대한안전경영과학회지
• /
• 제12권4호
• /
• pp.153-160
• /
• 2010

In this paper, effects of information sharing in multi-level supply chain management have been studied through simulation. The simulation model consists of a manufacturing company as a center, three suppliers, two logistic centers, and three different retail supply lines of each logistics centers. The mathematical model and the simulation were developed when real-time information sharing occurs and does not occur in supply chain under the assumption that each company applies (s, S) inventory policies. In addition, this paper analyzed the effects of the change of variables related to total costs, which compose of total ordering cost, total transportation cost, total carrying cost and shortage cost that are caused by the change of demand of three different patterns with the way of information sharing.

• 한국안전학회지
• /
• 제14권1호
• /
• pp.66-72
• /
• 1999

Local heating transportation pipe has sensor and return lines to detect water-leakage. There are impulse and resistance comparison measurement types for a water-leakage detection. The impulse type shows large detection error within a measurement range. Since the resistance comparison type can find a comparative accurate single water-leakage point in the measurement range of heating pipe, it has been used to detect water-leakages these days. However if the multi water-leakages are happened in the measurement range of transportation pipe. the resistance comparison type shows a detection error point by the parallel resistance between a detection sensor line and ground. But the detection error will be minimized by the divided transportation pipe loops. In this research, it suggests the design of remote controlled detection system which can divide a large pipe loop and a possible single water-leakage measurement process in each divided loops.

• BMB Reports
• /
• 제33권6호
• /
• pp.537-540
• /
• 2000

A simplified but reliable method was developed for the polymerase chain reaction (PCR)-based detection of genetically modified (GM) plants. The modified CTAB (mCTAB) method enabled us to prepare a high quality of genomic DNA from several hundred plant leaf samples in one day. Using DNA samples prepared from seven dicots and two monocots, approximately 1.75-kb regions spanning 17 S to 25 S ribosomal RNA genes were successfully amplified in a 2X PCR pre-mix containing BLOTTO. Further fidelity assessment of the mCTAB method by PCR analysis with Roundup Ready soybean (RRS) and non-RRS plants showed that the DNA samples prepared alternately from each of two lines were evidently free of cross-contamination. These results demonstrate that the mCTAB method is highly recommended for the rapid detection of transgenes in large numbers of leaf samples from diverse transgenic plants.

• 대한안전경영과학회지
• /
• 제4권2호
• /
• pp.83-101
• /
• 2002

In this thesis presents line balancing problems of two-sided and mixed model assembly line widely used in practical fields using genetic algorithm for reducing throughput time, cost of tools and fixtures and improving flexibility of assembly lines. Two-sided and mixed model assembly line is a special type of production line where variety of product similar in product characteristics are assembled in both sides. This thesis proposes the genetic algorithm adequate to each step in tow-sided and mixed model assembly line with suitable presentation, individual, evaluation function, selection and genetic parameter. To confirm proposed genetic algorithm, we apply to increase the number of tasks in case study. And for evaluation the performance of proposed genetic algorithm, we compare to existing algorithm of one-sided and mixed model assembly line. The results show that the algorithm is outstanding in the problems with a larger number of stations or larger number of tasks.

• 대한안전경영과학회지
• /
• 제5권3호
• /
• pp.145-156
• /
• 2003

As we understand it, Process Capability indices are intended to provide single-number assessments of ability to meet specification limits on quality characteristics of interest. As a consequence of the varied ways in which PCIs are used, there have been two natural lines of research work: $\circled1$ studies on the properties of PCIs and their estimators in many different environments; $\circled2$ construction of new PCIs purporting to have better properties in certain circumstances. The most of existing process capability indices are concerned with the single variable. But, in many cases, a quality characteristic is composed with several factors. In that case, we want to know the integrated process capability of a quality characteristic not those of each factor. In this paper, we proposed a new multivariate system process capability index called $MSPCI:SC_{psk}$ which is the geometric mean of performance measure $C_{psk}$'S, and will be used as the criterion to assess multiple response process designs. Numerical illustration is done for $SC_{psk}$, $\overline{C_p}$(f), Cp, Cpk, Cpm, and Cpsk.

• 자동차안전학회지
• /
• 제5권1호
• /
• pp.50-55
• /
• 2013

When it comes to commercial vehicles, their unique characteristics - center of gravity, size, weight distribution - make them particularly vulnerable to rollover. On top of that, conventional heavy vehicle brake exhibits longer actuation delays caused in part by long air lines from brake pedal to tires. This paper describes rollover prevention algorithm that copes with the characteristics of commercial vehicles. In regard of compensating for high actuating delay, predicted rollover index with short preview time has been designed. Moreover, predicted rollover index with longer preview time has been calculated by using road curvature information based on environment information. When rollover index becomes larger than specific threshold value, desired braking force is calculated in order to decrease the index. At the same time, braking force is distributed to each tire to make yaw rate track desired value.