• Journal of the Korean Society of Safety
• /
• v.6 no.1
• /
• pp.39-53
• /
• 1991

Prior to being prepared the surveilance method and the surveilance system of chemical hazards, the employer's investigastion of the newly-registered-chemical hazards has been to be under obligation along with legislation of the Hazardous Chemicals Control Act and revision of the Industrial Safety & Health Act in 1990. In order to make up the chemical hazards examining plan and to frame the chemical hazards investigating system about the newly-registered chemicals and the existing hazardous chemicals in worksite environments, the KISCO's chemical hazards surveilance program is methodologically researched and presented.

• International conference on construction engineering and project management
• /
• 2015.10a
• /
• pp.255-258
• /
• 2015

Scaffolds are frequently used in construction projects. Despite the impact on the entire safety, scaffolds are rarely analyzed as part of the safety planning. While recent advances in BIM (Building Information Modeling) provides opportunity to address potential safety issues in the early planning stages, it is still labor-intensive and challenging to incorporate scaffolds into current manual jobsite safety analysis which is time-consuming and error-prone. Consequently, potential safety hazards related to scaffolds are identified and presented during the construction phase. The objective of this research is to integrate scaffolds into automated safety analysis using BIM. A safety checking system was created to simulate the movements of scaffolds along the paths of crews using the scaffolds. Algorithms in the system automatically identify safety hazards related to activities working on scaffolds. Then, the system was implemented in a commercially available BIM software program for case studies. The results show that the algorithms successfully identified safety hazards that were not noticed by project managers of the projects. The results were visualized in BIM to facilitate early safety communications.

• Safety and Health at Work
• /
• v.9 no.3
• /
• pp.360-364
• /
• 2018

Asbestos has been banned in many countries but many countries, including developing countries, are still using asbestos or materials containing asbestos. Substitute materials have been studied and developed over a long period of time because of the hazards of asbestos, and many people have recently shown interest in the hazards of substitute materials. However, comprehensive information about the types of asbestos substitutes, their use and health hazards, and references for the protection for the health of workers is limited. The purpose of this study is to provide people in the related industries with information on the types and health hazards of fibrous materials that can be used as asbestos substitutes. According to the patent resources from the United States and Europe, fibrous materials have been used to develop asbestos-free products since before 1980. Recently, the health hazards of asbestos substitutes have been assessed and many additional researches are required. However, only some of the substitute materials have been assessed for health hazards, and health hazard data has not been sufficient in many cases. Therefore, efforts should be made to minimize workers' exposure to substitute materials that do not contain asbestos.

• Journal of the Korea Safety Management & Science
• /
• v.19 no.4
• /
• pp.133-140
• /
• 2017

The Ministry of Science, ICT and Future Planning made law for Pre-Hazard Risk Analysis in December 31, 2014 to protect researchers from continuing accidents in laboratory. Conducted before an experiment, Pre-Hazard Risk Analysis finds hazards of the experiment and rules to manage the hazards.So the Pre-Hazard Risk Analysis can support laboratory safety system by prevent accidents in laboratory. Pre-Hazards Risk Analysis is newly created system so that executors need Guidelines to perform this analysis properly. This study is to develop guide tool for Pre-Hazard Risk Analysis by analyzing other risk assessment systems; PSM, Off-site Consequence Assessment, laboratory safety system. Also, this study suggested how to establish database for Pre-Hazard Risk Assessment by analyse KRAS.

• Journal of the Korea Safety Management & Science
• /
• v.16 no.1
• /
• pp.79-88
• /
• 2014

The rapid growth of complexity and scale can be witnessed in the design and development of modern systems. As such, the severity of damages in the occasional accidents has attracted great deal of attention lately. Although a variety of methods have so far been studied to overcome or reduce the disastrous results of hazards, the issues seem still persistent and even complicated due to the situation mentioned above. The concept of functional safety has been regarded as one approach to handling the matters by shifting up to the functions level from the consideration of each physical component itself. The outcomes of those efforts would be the international standards on functional safety such as IEC 61508 and its relatives including IEC 62278, EN 50128, ISO26262, and so on. In this paper, a method of how hazards can be analyzed to be coped with those standards has been studied. In the method proposed, the systems modeling language (SysML) is playing a key role to model and analyze the hazards from the viewpoint of functional safety. The approach taken has been applied in the analysis of the hazards in railroad systems. In spite of focusing on the individual components hazards, the method based on functional safety has analyzed them collectively with the added effect of identifying the cause originated from the interface between the functions.

• International conference on construction engineering and project management
• /
• 2022.06a
• /
• pp.94-102
• /
• 2022

Construction workers are engaged in many activities that may expose them to serious hazards, such as falling, unguarded machinery, or being struck by heavy construction equipment. Despite extensive research in building information modeling (BIM) for safety management, current approaches, detecting safety issues after design completion, may limit the opportunities to prevent predictable and potential accidents when decisions of building materials and systems are made. In this respect, this research proposes a proactive approach to detecting safety issues from the early design phase. This research aims to explore accident precursors and integrate them into BIM for tracking safety hazards during the design development process. Accident precursors can be identified from construction incident reports published by OSHA using a text mining technique. Through BIM-integrated accident precursors, construction safety hazards can be identified during the design phase. The results will contribute to supporting a successful transition from the design stage to the construction stage that considers a safe construction workplace. This will advance the body of knowledge about construction safety management by elucidating a hypothesis that safety hazards can be detected during the design phase involving decisions about materials, building elements, and equipment. In addition, the proactive approach will help the Architecture, Engineering and Construction (AEC) industry eliminate occupational safety hazards before near-miss situations appear on construction sites.

• Journal of the Korean Society of Safety
• /
• v.38 no.4
• /
• pp.47-53
• /
• 2023

In the inspection of workplace hazards/risk factors by specialized institutions dedicated to safety management, inspection reports vary based on the inspectors, who lack the authority to enforce improvement of workplace hazards/risk factors. Thus, improvement and accident rates remain steady without decreasing. This study performed a regression analysis on the relationship between improvement and accident rates of categorized inspection items by classifying hazards/risk factors from inspection reports submitted by a specialized safety management institution in Chungbuk after inspecting 10 food and beverage manufacturers over the past three years. The hazards/risk factors were classified into five categories: mechanical, electrical, chemical, human, and environmental. The regression analysis revealed that the improvement rate of hazards/risk factors inspected by the specialized safety management institution influenced accident rates. To enhance improvement rates based on these findings, this study prioritized the correction of the five most frequently cited inspection items with the lowest improvement rates in each area. Based on these inspection items, this study suggested a checklist for use in workplace safety inspections of food manufacturers. This proposed checklist is expected to reduce accident rates in food manufacturing facilities. Currently, guidance and inspection of workplaces are mainly focused on accident rates rather than correcting hazards/risks. Thus, accident rates remain unchanged as workplace risks are inadequately improved according to the unique characteristics of each workplace. When conducting workplace guidance and inspection, policy measures and inspection methods are warranted to increase the improvement rate of hazards/risks.

• Safety and Health at Work
• /
• v.11 no.4
• /
• pp.397-404
• /
• 2020

Background: Most job exposure matrices (JEMs) have been developed for chemical and physical hazards in the United States (US). In addition, the overall validity of most JEMs of work organization hazards using self-reported data in the literature remains to be further tested due to several methodological weaknesses. Methods: This paper aims to review important methodological issues with regard to a JEM of work organization hazards using self-report data and to present a research protocol for developing a four-axis (job titles, hazards, sex, and time) JEM of major work organization hazards using the US General Social Survey-Quality of Work-Life (GSS-QWL) data (2002-2018; N = 7,100 workers). Results: Five methodological weaknesses in existing JEMs of work organization hazards using self-report data were identified: having only two axes (hazard and occupation), using psychometrically weak items and scales, including scales having little interoccupational variability, unresolved optimal minimum numbers of subjects per occupation, and low accessibility. The methodological weaknesses were successfully addressed in the proposed research protocol. Conclusion: The work organization JEM to be developed will significantly facilitate and strengthen occupational epidemiological studies on work organization hazards and major health outcomes, improve national and occupational surveillance of work organization hazards, and promote interventions for a healthy work environment in the US.

• Proceedings of the KSR Conference
• /
• 2007.05a
• /
• pp.1008-1015
• /
• 2007

The primary purpose of the safety management is to prevent the loss of lives or physical damages arising from potential hazards in the railroad signaling system. Since such potential hazards may occur at any time during the system life cycle from design and development to maintenance, safety management activities have to be continuously taken in the course of the system life cycle. The identification of potential hazards is the early step of the safety management. However, such identification activities have to be continued during the system life cycle. Further, they have to be closely linked with system functions to prevent functional problems. This study provides a systematic approach to identification of potential hazards for their tracking and management during the system life cycle to assure the identification and definition of the most appropriate hazards.

• International Journal of Safety
• /
• v.4 no.2
• /
• pp.43-46
• /
• 2005

The construction workers might be at the risk of many occupational injuries and illnesses. To protect workers from various hazards, industrial health and hygiene systems were specified for the construction workers by law. It is important to know the actual health and safety(H&S) conditions by tasks and the characteristics of injuries and illnesses of construction workers. This study was designed to investigate the actual conditions of construction workers exposed to various harmful substances and work elements including evaluation of health status of each worker and general H&S system. Questionnaire was sent to 600 construction workers nationwide and totally 367 people responded to it having 61.67% of response rate. The common construction hazards were dust(29.6%), noise(19.3%), repetitive motions(12.0%), handling excessive heavy materials(11.2%) in order. The repetitive motions and handling heavy materials related to muscle disorders accounted for 23.2%. The accident and injury types were in order of overexertion, falling, overturning, dropping or flying, electric shock, collision, etc.