• Safety and Health at Work
• /
• v.6 no.2
• /
• pp.97-103
• /
• 2015

Background: This paper describes the development of a scale for measuring safety climate. Methods: This study was conducted in six manufacturing companies in Iran. The scale developed through conducting a literature review about the safety climate and constructing a question pool. The number of items was reduced to 71 after performing a screening process. Results: The result of content validity analysis showed that 59 items had excellent item content validity index (${\geq}0.78$) and content validity ratio (> 0.38). The exploratory factor analysis resulted in eight safety climate dimensions. The reliability value for the final 45-item scale was 0.96. The result of confirmatory factor analysis showed that the safety climate model is satisfactory. Conclusion: This study produced a valid and reliable scale for measuring safety climate in manufacturing companies.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2002.03a
• /
• pp.643-650
• /
• 2002

The large planar failure has occurred in a rock cut slope of highway construction site in Boeun. This area is considered as unstable since the discontinuities whose orientations are similar to the orientation of the failure plane, are observed in many areas. Therefore, several analysis techniques such as SMR, stereographic analysis, limit equilibrium, numerical analysis, which are commonly used in rock slope stability analysis, are adopted in this area. In order to analyze the stress redistribution and nonlinear displacement caused by cut, which are not obtained in limit equilibrium method, the UDEC and shear strength reduction technique were used in this study Then the factors of safety evaluated by shear strength reduction technique and limit equilibrium were compared. In addition, the factor of safety under fully saturated slope condition was calculated and subsequently, the effect of the reinforcement was evaluated.

• Geotechnical Engineering
• /
• v.7 no.4
• /
• pp.89-98
• /
• 1991

This paper presents the three-dimensional stability analysis of the homogeneous, isotropic soil Slopes. Rotational slides are assumed with a cylindroid central part terminated with log-spiral curved ends. The ratio of threeiimensional minimum factor of safety to two 4imensional case is examined and factor of safety changes are showed for the ratio of cylinder length to slope height. On touch babes the following conclusions may be made 1. Factors of safety computed for 3-D geometry differ considerablely from ordir,arty 2-D factor of. safety. Sinoe Fn 1 Fa2 exceeds unity, threeiimensional effects tend to increase the factor of safety. 2. A,B LIU increase, the value of Fb3/ Fs2 decreases. 3. The ratio of Fr/Fs2 appears to be very sensitive to c and values.

• Nuclear Engineering and Technology
• /
• v.55 no.10
• /
• pp.3628-3638
• /
• 2023

This paper uses 135 Licensed Operator Event Reports (LOER) from Chinese nuclear plants to analyze how safety culture affects unsafe behaviors in nuclear power plants. On the basis of a modified human factors analysis and classification system (HFACS) framework, structural equation model (SEM) is used to explore the relationship between latent variables at various levels. Correlation tests such as chi-square test are used to analyze the path from safety culture to unsafe behaviors. The role of latent error is clarified. The results show that the ratio of latent errors to active errors is 3.4:1. The key path linking safety culture weaknesses to unsafe behaviors is Organizational Processes → Inadequate Supervision → Physical/Technical Environment → Skill-based Errors. The most influential factors on the latent variables at each level in the HFACS framework are Organizational Processes, Inadequate Supervision, Physical Environment, and Skill-based Errors.

• Journal of the Korean Society of Safety
• /
• v.29 no.5
• /
• pp.136-145
• /
• 2014

This article has compared the level of activities of occupational safety and health in workplace among sub-sectors of manufacturing industry in order to set the priority for policy intervention. Data of manufacturing industry in the survey on the current status of occupational safety and health was used with factor analysis and radar graphic method. Authors have categorized sub-sectors of manufacturing industry into four categories, attained group, active group, neglected group, and passive group based on injury rate, level of safety and health activities. The neglected group may be the first target group for occupational safety and health policy guiding some detailed occupational safety and health activities. Limitation of this study is that cross sectional data was analyzed. The long term effect could not be analyzed.

• Journal of the Korean Geotechnical Society
• /
• v.37 no.9
• /
• pp.5-12
• /
• 2021

Pseudo-static slope stability analysis method is widely used in engineering practice to calculate the seismic factor of safety of slope subjected to earthquake ground motions. Although the dynamic analysis method is well recognized to have the primary advantage of simulating the stress-strain response of soils, it is not often used in practice because of the difficult in estimating the factor of safety. In this study, a procedure which utilizes the dynamic analysis method to extract the transient dynamic factor of safety is devleoped. This method overcomes the major limitation of the pseudo-static method, which uses an empirically determined seismic coefficient to derive the factor of safety. The proposed method is applied to a slope model and the result is compared with that of the pseudo-static method. It is shown that minimum dynamic factor of safety calculated by the dynamic analysis is slightly larger than that determined from the pseudo-static method. It is also demonstrated that the dynamic factor of safety becomes minimum when the horizontal seismic coefficient and horizontal average acceleration are maximum.

• Proceedings of the Safety Management and Science Conference
• /
• 2009.11a
• /
• pp.187-201
• /
• 2009

Semiconductor industry is based on equipment industry and timing industry. In particular, semiconductor process is very complex and as semiconductor-chip width tails and is becoming equipment gradually more as a high technology. Equipment operation is primarily engaged in semiconductor manufacturing (engineers and operator) of being conducted by, equipment errors have also been raised. Equipment operational data related to the error of korea occupational safety and health agency were based on data and production engineers involved in the operator's questionnaire was drawn through the error factor. Equipment operating in the error factor of 9 big item and 36 detail item detailed argument based on the errors down, and 9 big item the equipment during operation of the correlation error factor was conducted. Each of the significance level was correlated with the tabulation and analysis. Using the maximum correlation coefficient, the correlation between the error factors to derive the relationship between factors were analyzed. Facility operating with the analysis of error factors (big and detail item) derive a relationship between the model saw. The end of the operation of the facility in operation on the part of the two factors appeared as prevention. Safety aspects and ergonomics aspects of the approach should be guided to the conclusion.

• Proceedings of the Safety Management and Science Conference
• /
• 2003.11a
• /
• pp.75-80
• /
• 2003

The objectives of this study is to achieved by the use of the conceptual approach and accident data bases to develop statistical accident analysis, effectiveness values, comparison analysis of statistical models to determine which variables are significantly related to accidents, human factor, and hazard factor analysis, all of which were used in the railroad crossing. The result from this approach applicable to the railroad crossing where systematic safety management criteria have been considered.

• Nuclear Engineering and Technology
• /
• v.46 no.1
• /
• pp.81-92
• /
• 2014

This study suggests 5 evaluation criteria (safety and technology, environmental impact, economic feasibility, social factors, and institutional factors) and 24 evaluation indicators for a NFC (nuclear fuel cycle) derived using factor analysis. To do so, a survey using 1 on 1 interview was given to nuclear energy experts and local residents who live near nuclear power plants. In addition, by conducting a factor analysis, homogeneous evaluation indicators were grouped with the same evaluation criteria, and unnecessary evaluation criteria and evaluation indicators were dropped out. As a result of analyzing the weight of evaluation criteria with the sample of nuclear power experts and the general public, both sides recognized safety as the most important evaluation criterion, and the social factors such as public acceptance appeared to be ranked as more important evaluation criteria by the nuclear energy experts than the general public.

• Korean Journal of Agricultural Science
• /
• v.45 no.4
• /
• pp.889-903
• /
• 2018

The purposes of this study were to classify consumer types and to analyze purchase behavior depending on food safety attitudes related to the Fukushima nuclear accident. Based on the consumer survey data, factor analysis and cluster analysis were done to classify consumer types. Applying factor analysis, six factors with a total variance of 73.4% were extracted from 22 basic variables. The 6 factors were termed 'anxiety from ingesting agricultural and fishery products after the nuclear accident', 'importance of food safety when purchasing food', 'reduced rate of purchases of agricultural and fishery products after the accident', 'importance of food prices', 'socio-demographic characteristics' and 'family composition'. Using cluster analysis, consumers were classified into 5 types using the factor scores of 6 factors. The main results are as follows. For every consumer type, the anxiety about imported agricultural and fishery products was higher than that for domestic products after the nuclear accident. The food safety attitudes of consumers were mainly formed by the socio-demographic characteristics. Consumer types with high-education and high-income responded flexibly to the food safety concerning the accident; especially, the consumer type with a high-income and kids under 19 responded very reasonably to the accident. However, consumer types with a low-income and aged over 50 or less than 30 years were the least responsive to the accident, mainly due to financial restrictions. Thus, we suggest some food safety strategies and policy implications based on consumer type for food safety after the accident.