• 한국식품과학회지
• /
• 제40권2호
• /
• pp.228-233
• /
• 2008

식품제조 및 조리 현장에 널리 보급되어 사용되고 있는 자외선 살균소독기의 유효성과 안전성을 검정하기 위하여 자외선램프의 출력 및 거리에 따른 자외선 강도를 측정하였고, 시판 자외선 살균소독기 5종에 대하여 장치 내 자외선 분포를 조사하였으며, 자외선 누출을 검정하였다. 자외선 강도는 램프 출력에 비례하였으며, 근거리(<25 cm)에서는 램프로부터의 거리에, 원거리(>25 cm)에서는 거리의 제곱에 반비례하여 변화하였다. 자외선 살균소독기 내 자외선 강도는 선반의 중앙부에서 가장 높았고, 선반의 중심에서 전후 또는 좌우 방향으로 멀어짐에 따라 감소하였다. 선반 위치에 따른 자외선 강도는 상단 선반과 하단 선반사이에 큰 차이를 보였으며, 각 선반의 외곽부위에서는 자외선강도가 극히 약화되었다. 문틈 등 틈새가 있을 경우 이를 통한자외선 누출은 상당한 수준에 달하였으며, 누출 자외선 강도는거리에 따라 낮아졌다. 자외선이 누출되는 자외선 살균소독기에 대하여 선진국의 자외선 노출 허용량을 근거로 안전작업거리를 제시하였다.

• 대한교통학회지
• /
• 제26권3호
• /
• pp.67-74
• /
• 2008

현재 시행 중인 지점단위 사고잦은곳 개선사업은 매년 효율성이 저하되고 있으나, 효율성 제고방안으로 제기되고 있는 구간단위 개선사업은 방법론에 있어 아직까지 구체적인 방안이 제시되지 못하고 있는 실정이다. 이에 본 연구는 일반국도를 대상으로 개선사업 및 미개선사업 지점으로 부터 사업 차년도 신규 사고잦은곳에 이르는 거리자료를 분석하여, 적정 개선사업 구간길이 및 구간설정 방안을 제시하고자 하였다. 거리자료 분석결과, 개선사업을 실시한 교차로로부터 2Km 내 신규 사고잦은곳이 발생할 확률이 미개선 교차로 지점에 비해 높은 것으로 나타났으나 개선사업 내역별 거리분포 차이는 미미한 것으로 나타났다. 최종적으로, 상호 인접거리가 2km내에 있는 일련의 사고잦은곳을 포함하는 구간을 개선사업 후보구간으로 선정하는 방안을 제시하였다.

• Journal of Gastric Cancer
• /
• 제1권1호
• /
• pp.24-31
• /
• 2001

Purpose: Despite knowledge of the adverse effects of resection-line disease, surgeons continue to perform inadequate resections. This demonstrates the need for a more aggressive approach to assessment of resection margins at operation. Materials and Methods: Seven hundred fifteen gastric cancer patients who were operated on at our hospital from 1992 to 1998 were included in this analysis. Various clinicopathological factors, including resection-line involvement, were ascertained from the surgical and histopathological records. Results: Of the 715 evaluable patients, 27 patients ($3.8\%$) had involvement of one or both resection lines; in 10 patients the proximal resection line only, in 16 the distal resection line only, and 1 both resection lines were involved. Presence of resection-line involvement was significantly associated with T3 and T4 stage, N (+) stage, M (+) stage, type of operation (total gastrectomy), tumor location (entire stomach), size$\geq$11 cm), and gross type of tumor (Borrmann 4 type). When performing a distal subtotal gastrectomy, no involvement was found when the cranial and caudal distances between the lesion and the line of transection was equal to or greater than 2 cm and 3 cm, respectively, for early cancer and 7 cm and 3 cm, respectively, for advanced cancer. When performing a total gastrectomy for upper 1/3 or middle 1/3 gastric cancer, no involvement was found when the cranial distances between the lesion and the line of transection were equal to or greater than 3 cm and 4 cm, respectively, without distinction of the presence of serosal invasion. Conclusions: The difference in survival between positive and negative margin patients is limited to the group of patients with curative surgery. An important principle of treatment is that the entire tumor must be removed with a 3 cm distal margin and a 2- to 7 cm margin depending on the location and the depth of wall invasion of the tumor, to provide histologically negative margins.

• 한국도로학회논문집
• /
• 제14권1호
• /
• pp.9-16
• /
• 2012

운전자 생명선인 차선은 주간 시인성, 야간 시인성, 야간 젖은 상태 시인성, 야간 강우시 시인성으로 구분된다. 본 연구는 특히, 비와 관련되어 기상이 불안전한 조건에서 운전자의 주행 안전 확보를 목적으로 하였다. 차선의 시인성은 사전 인지시간(Preview time) 과 감지거리(Detection distances)와 밀접한 관계가 있으며, 야간 교통사고 감소를 위하여 차선 재료 성능을 향상시켜 차선의 주야간과 우천시 주야간 시인성의 척도인 Dry 재귀반사도(Dry retroreflectivity) 및 Wet 재귀반사도(Wet Retroreflectivity)를 높이기 위한 방안을 마련하는 데 있다. 이를 위하여 일반적으로 사용되고 있는 차선 도료용 유리알 굴절률 nD=1.50의 분석과 시인성의 척도인 재귀반사도를 향상시키기 위하여 가장 중요한 변수인 기능성 차선 도료용 유리알 굴절률 nD=2.2.을 도입하였다. 국내외 최소 한계 재귀반사도(Minimum threshold retroreflectivity) 및 최소 인지 재귀반사도(Install minimum retroreflectivity)를 조사하여 차선의 시인성 확보를 위한 최소한의 관리 수치를 규명하였으며 아울러 국내기존 차선 재료의 물리적 특성 그리고 재귀반사도의 시험을 통하여 우천 시 야간 재귀반사도 향상 방안을 마련하였다.

• 의료ㆍ복지 건축 : 한국의료복지건축학회 논문집
• /
• 제25권3호
• /
• pp.15-23
• /
• 2019

Purpose: As the medical laboratories in general hospitals have made an efforts on quality management and employee health, they recognized the need of design guideline for clinical laboratory. As laboratories are prohibited to patients, their environments are becoming more congested and deteriorated as time goes by. So, this study investigates the current status of facility and equipment of laboratory medicine focusing on less than three hundred patient bed hospitals, and searches the improving matters. Methods: Questionnaires to technologist captains and field surveys to medical laboratories in korean hospitals have been conducted for the data collection. 18 answers have been analysed statistically by MS Excel program. Results: The result of this study can be summarized into followings. Clinical laboratory functions are all hematology, clinical chemistry, immunology, transfusion and urine microscopy, and except for three including microbiology for infection and bio safety level. Average man power of lab are 12.3 man including lab director and captain. Patient bed number, space area and total specimen numbers are not correlated with each other, but specimen numbers and employee number are correlated with. Work space distances are usually good, but exit distances are not adequate for escape owing to obstacles. Specimen delivery system by courier, test method by automatic analyzer, access floor for exposed plumbing and electricities are more practical. Open lab layed out in the center and lab support layed peripheral in space diagram. Lab space configuration by SD method showed that lab support area and employee support area are dissatisfied. Implications: Specialized hospital and yearly total specimen numbers are related to the space area and organization for laboratory planning and design.

• Structural Engineering and Mechanics
• /
• 제85권3호
• /
• pp.381-391
• /
• 2023

The seismic performance of the tall building equipped with a tuned mass damper (TMD) considering soil-structure interaction (SSI) effects is well studied in the literature. However, these studies are performed on the nominal model of the seismic-excited structural system with SSI. Hence, the outcomes of the studies may not valid for the actual structural system. To address the study gap, the reliability theory as a useful and powerful method is utilized in the paper. The present study aims to carry out reliability analyses on tall buildings equipped with TMD under near-field pulse-like (NFPL) ground motions considering SSI effects using a subset simulation (SS) method. In the presence of uncertainties of the structural model, TMD device, foundation, soil, and near-field pulse-like ground motions, the numerical studies are performed on a benchmark 40-story building and the failure probabilities of the structures with and without TMD are evaluated. Three types of soils (dense, medium, and soft soils), different earthquake magnitudes (M_w = 7,0. 7,25. 7,5 ), different nearest fault distances (r = 5. 10 and 15 km), and three seismic performance levels of immediate occupancy (IO), life safety (LS), and collapse prevention (CP) are considered in this study. The results show that tall buildings built near faults and on soft soils are more affected by uncertainties of the structural and ground motion models. Hence, ignoring these uncertainties may result in an inaccurate estimation of the maximum seismic responses. Also, it is found the TMD is not able to reduce the failure probabilities of the structure in the IO seismic performance level, especially for high earthquake magnitudes and structures built near the fault. However, TMD is significantly effective in the reduction of failure probability for the LS and CP performance levels. For weak earthquakes and long fault distances, the failure probabilities of both structures with and without TMD are near zero, and the efficiency of the TMD in the reduction of failure probabilities is reduced by increasing earthquake magnitudes and the reduction of fault distance. As soil softness increases, the failure probability of structures both with and without TMD often increases, especially for severe near-fault earthquake motion.

• 수산경영론집
• /
• 제38권1호
• /
• pp.115-132
• /
• 2007

Implementing the automatic identification in supply chain management is essential for effective and efficient process control. Though the GTIN based bar code system is generally used as an automatic identification method in most industries, it can not identify individual item, and is not appropriated for products' reliability and safety management. So the RFID system with EPC is considered as a better solution for resolving those problems. This study reviewed automatic identification code systems and the attributes and characteristics of RFID Gen 2 which became a global standard recently for supply chain management. Particularly, this study analyzed RFID Gen 2 systems' read rates on various conditions including distances between tags and readers and between antennas, condensation, and several packing materials in practical supply chain environment. The results of this study showed that the RFID Gen 2 had high read ratio in practical application and would be adopted as a new automatic identification means for traceability systems.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 D
• /
• pp.2531-2533
• /
• 2005

The proposed neural network technique is the real time computation method based theory of inter-node diffusion for searching the safety distances from the sudden appearance-objects during the work driving. The main steps of the distance computation using the theory of stereo vision like the eyes of man is following steps. One is the processing for finding the corresponding points of stereo images and the other is the interpolation processing of full image data from nonlinear image data of objects. All of therm request much memory space and time. Therefore the most reliable neural-network algorithm is drived for real-time matching of obejects, which is composed of a dynamic programming algorithm based on sequence matching techniques in moving objects.

• 한국지진공학회논문집
• /
• 제3권1호
• /
• pp.21-28
• /
• 1999

본 연구의 목적은 한반도 남부 지역에서의 지진동 감쇄식을 개발하는 것이다 활용가능한 계기 지진 자료로부터 지진원 및 지반 매질의 특성을 추정하고 그 값을 입력 요소로써 사용하였다 확률진동이론에 의하여 최대 지반가속도 및 의사 속도 응답스펙트럼을 모사하여 이로부터 최대지반 가속도 및 의사 속도 응답스펙트럼에 대한 감쇄식을 지역규모 및 진원거리의 함수로 개발하였다

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2008년도 추계 학술논문 발표대회
• /
• pp.235-239
• /
• 2008

Cable systems are a construction of elements carrying only tension and no compression or bending in membrane structure. Tensile membrane structures are most often used as roofs as they can economically and attractively span large distances. But cable systems have weaknesses to vibration by earthquake, wind and vehicle loads. Damage detection of cable systems by using existing safety diagnosis is difficult to detect the characteristic change of overall structural action. If cable snaps are occurred to cable release and tear in tension structures, these are set up a vibration. So, we used piezo-electric materials, and The principle of operation of a piezoelectric sensor is that a physical dimension, transformed into a force, acts on two opposing faces of the sensing element. In this study, the development on test method of cable system is proposed and tested by tensile strength using piezo-electric materials.